2011-12-14 03:13:32 +00:00
# Target file name (without extension).
2013-08-04 07:13:51 +00:00
TARGET = m0110_lufa
2011-12-14 03:13:32 +00:00
# Directory common source filess exist
2012-06-07 15:37:46 +00:00
TOP_DIR = ../..
2011-12-14 03:13:32 +00:00
# Directory keyboard dependent files exist
TARGET_DIR = .
# keyboard dependent files
2013-08-04 07:13:51 +00:00
SRC = matrix.c \
2011-12-14 03:13:32 +00:00
led.c \
m0110.c
2013-08-04 07:13:51 +00:00
# To use own keymap file run make like: make keymap=hasu
i f d e f k e y m a p
SRC += keymap_$( keymap) .c
e l s e
SRC += keymap.c
e n d i f
2011-12-14 03:13:32 +00:00
CONFIG_H = config.h
# MCU name, you MUST set this to match the board you are using
# type "make clean" after changing this, so all files will be rebuilt
#MCU = at90usb162 # Teensy 1.0
MCU = atmega32u4 # Teensy 2.0
#MCU = at90usb646 # Teensy++ 1.0
#MCU = at90usb1286 # Teensy++ 2.0
# Processor frequency.
# Normally the first thing your program should do is set the clock prescaler,
# so your program will run at the correct speed. You should also set this
# variable to same clock speed. The _delay_ms() macro uses this, and many
# examples use this variable to calculate timings. Do not add a "UL" here.
F_CPU = 16000000
2013-08-04 07:13:51 +00:00
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $( F_CPU)
# Interrupt driven control endpoint task
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
2013-04-12 12:52:34 +00:00
# Boot Section Size in bytes
# Teensy halfKay 512
# Atmel DFU loader 4096
# LUFA bootloader 4096
OPT_DEFS += -DBOOTLOADER_SIZE= 4096
2011-12-14 03:13:32 +00:00
# Build Options
# *Comment out* to disable the options.
#
2013-09-21 09:35:02 +00:00
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
2013-04-12 12:52:34 +00:00
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
2013-09-25 06:21:00 +00:00
KEYMAP_SECTION_ENABLE = yes # fixed address keymap for keymap editor
2011-12-14 03:13:32 +00:00
#---------------- Programming Options --------------------------
PROGRAM_CMD = teensy_loader_cli -mmcu= $( MCU) -w -v $( TARGET) .hex
2012-06-30 05:44:59 +00:00
# Search Path
VPATH += $( TARGET_DIR)
VPATH += $( TOP_DIR)
2011-12-14 03:13:32 +00:00
2013-08-04 07:13:51 +00:00
i n c l u d e $( TOP_DIR ) / p r o t o c o l / l u f a . m k
2012-06-07 03:35:24 +00:00
i n c l u d e $( TOP_DIR ) / p r o t o c o l . m k
i n c l u d e $( TOP_DIR ) / c o m m o n . m k
i n c l u d e $( TOP_DIR ) / r u l e s . m k