@@ -0,0 +1,156 @@ | |||
#---------------------------------------------------------------------------- | |||
# On command line: | |||
# | |||
# make all = Make software. | |||
# | |||
# make clean = Clean out built project files. | |||
# | |||
# make coff = Convert ELF to AVR COFF. | |||
# | |||
# make extcoff = Convert ELF to AVR Extended COFF. | |||
# | |||
# make program = Download the hex file to the device. | |||
# Please customize your programmer settings(PROGRAM_CMD) | |||
# | |||
# make teensy = Download the hex file to the device, using teensy_loader_cli. | |||
# (must have teensy_loader_cli installed). | |||
# | |||
# make dfu = Download the hex file to the device, using dfu-programmer (must | |||
# have dfu-programmer installed). | |||
# | |||
# make flip = Download the hex file to the device, using Atmel FLIP (must | |||
# have Atmel FLIP installed). | |||
# | |||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer | |||
# (must have dfu-programmer installed). | |||
# | |||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP | |||
# (must have Atmel FLIP installed). | |||
# | |||
# make debug = Start either simulavr or avarice as specified for debugging, | |||
# with avr-gdb or avr-insight as the front end for debugging. | |||
# | |||
# make filename.s = Just compile filename.c into the assembler code only. | |||
# | |||
# make filename.i = Create a preprocessed source file for use in submitting | |||
# bug reports to the GCC project. | |||
# | |||
# To rebuild project do "make clean" then "make all". | |||
#---------------------------------------------------------------------------- | |||
# Target file name (without extension). | |||
TARGET = RedScarfIII_lufa | |||
# Directory common source filess exist | |||
TOP_DIR = ../.. | |||
# Directory keyboard dependent files exist | |||
TARGET_DIR = . | |||
# project specific files | |||
SRC = keymap_common.c \ | |||
matrix.c \ | |||
led.c \ | |||
backlight.c \ | |||
ledmap.c \ | |||
yc059.c \ | |||
rgb.c | |||
ifdef KEYMAP | |||
SRC := keymap_$(KEYMAP).c $(SRC) | |||
else | |||
SRC := keymap_default.c $(SRC) | |||
endif | |||
CONFIG_H = config.h | |||
# MCU name | |||
#MCU = at90usb1287 | |||
MCU = atmega32u4 | |||
# Processor frequency. | |||
# This will define a symbol, F_CPU, in all source code files equal to the | |||
# processor frequency in Hz. You can then use this symbol in your source code to | |||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||
# automatically to create a 32-bit value in your source code. | |||
# | |||
# This will be an integer division of F_USB below, as it is sourced by | |||
# F_USB after it has run through any CPU prescalers. Note that this value | |||
# does not *change* the processor frequency - it should merely be updated to | |||
# reflect the processor speed set externally so that the code can use accurate | |||
# software delays. | |||
F_CPU = 16000000 | |||
# | |||
# LUFA specific | |||
# | |||
# Target architecture (see library "Board Types" documentation). | |||
ARCH = AVR8 | |||
# Input clock frequency. | |||
# This will define a symbol, F_USB, in all source code files equal to the | |||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||
# at the end, this will be done automatically to create a 32-bit value in your | |||
# source code. | |||
# | |||
# If no clock division is performed on the input clock inside the AVR (via the | |||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||
F_USB = $(F_CPU) | |||
# Interrupt driven control endpoint task(+60) | |||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||
# Boot Section Size in *bytes* | |||
# Teensy halfKay 512 | |||
# Teensy++ halfKay 1024 | |||
# Atmel DFU loader 4096 | |||
# LUFA bootloader 4096 | |||
# USBaspLoader 2048 | |||
OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||
# Additional definitions from command line | |||
ifdef DEFS | |||
OPT_DEFS += $(foreach DEF,$(DEFS),-D$(DEF)) | |||
endif | |||
# Build Options | |||
# comment out to disable the options. | |||
# | |||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||
CONSOLE_ENABLE = yes # Console for debug(+400) | |||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend | |||
NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA | |||
USB_6KRO_ENABLE = yes # USB 6key Rollover | |||
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support | |||
#PS2_USE_BUSYWAIT = yes | |||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality | |||
KEYMAP_IN_EEPROM_ENABLE = yes # Read keymap from eeprom | |||
#KEYMAP_SECTION_ENABLE = yes # Fixed address keymap for keymap editor | |||
SOFTPWM_LED_ENABLE = yes # Enable SoftPWM to drive backlight | |||
FADING_LED_ENABLE = yes # Enable fading backlight | |||
BREATHING_LED_ENABLE = yes # Enable breathing backlight | |||
LEDMAP_ENABLE = yes # Enable LED mapping | |||
LEDMAP_IN_EEPROM_ENABLE = yes # Read LED mapping from eeprom | |||
# Optimize size but this may cause error "relocation truncated to fit" | |||
#EXTRALDFLAGS = -Wl,--relax | |||
# Search Path | |||
VPATH += $(TARGET_DIR) | |||
VPATH += $(TOP_DIR) | |||
include $(TOP_DIR)/protocol/lufa.mk | |||
include $(TOP_DIR)/protocol.mk | |||
include $(TOP_DIR)/common.mk | |||
include $(TOP_DIR)/rules.mk |
@@ -0,0 +1,120 @@ | |||
#---------------------------------------------------------------------------- | |||
# On command line: | |||
# | |||
# make all = Make software. | |||
# | |||
# make clean = Clean out built project files. | |||
# | |||
# make coff = Convert ELF to AVR COFF. | |||
# | |||
# make extcoff = Convert ELF to AVR Extended COFF. | |||
# | |||
# make program = Download the hex file to the device. | |||
# Please customize your programmer settings(PROGRAM_CMD) | |||
# | |||
# make teensy = Download the hex file to the device, using teensy_loader_cli. | |||
# (must have teensy_loader_cli installed). | |||
# | |||
# make dfu = Download the hex file to the device, using dfu-programmer (must | |||
# have dfu-programmer installed). | |||
# | |||
# make flip = Download the hex file to the device, using Atmel FLIP (must | |||
# have Atmel FLIP installed). | |||
# | |||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer | |||
# (must have dfu-programmer installed). | |||
# | |||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP | |||
# (must have Atmel FLIP installed). | |||
# | |||
# make debug = Start either simulavr or avarice as specified for debugging, | |||
# with avr-gdb or avr-insight as the front end for debugging. | |||
# | |||
# make filename.s = Just compile filename.c into the assembler code only. | |||
# | |||
# make filename.i = Create a preprocessed source file for use in submitting | |||
# bug reports to the GCC project. | |||
# | |||
# To rebuild project do "make clean" then "make all". | |||
#---------------------------------------------------------------------------- | |||
# Target file name (without extension). | |||
TARGET = RedScarfIII_pjrc | |||
# Directory common source filess exist | |||
TOP_DIR = ../.. | |||
# Directory keyboard dependent files exist | |||
TARGET_DIR = . | |||
# project specific files | |||
SRC = keymap_common.c \ | |||
matrix.c \ | |||
led.c \ | |||
backlight.c \ | |||
ledmap.c \ | |||
yc059.c \ | |||
rgb.c | |||
ifdef KEYMAP | |||
SRC := keymap_$(KEYMAP).c $(SRC) | |||
else | |||
SRC := keymap_default.c $(SRC) | |||
endif | |||
CONFIG_H = config.h | |||
# MCU name, you MUST set this to match the board you are using | |||
# type "make clean" after changing this, so all files will be rebuilt | |||
MCU = atmega32u4 | |||
#MCU = at90usb1286 | |||
# Processor frequency. | |||
# Normally the first thing your program should do is set the clock prescaler, | |||
# so your program will run at the correct speed. You should also set this | |||
# variable to same clock speed. The _delay_ms() macro uses this, and many | |||
# examples use this variable to calculate timings. Do not add a "UL" here. | |||
F_CPU = 16000000 | |||
# Boot Section Size in *bytes* | |||
# Teensy halfKay 512 | |||
# Atmel DFU loader 4096 | |||
# LUFA bootloader 4096 | |||
OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||
# Additional definitions from command line | |||
ifdef DEFS | |||
OPT_DEFS += $(foreach DEF,$(DEFS),-D$(DEF)) | |||
endif | |||
# Build Options | |||
# comment out to disable the options. | |||
# | |||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||
CONSOLE_ENABLE = yes # Console for debug(+400) | |||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend | |||
#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA | |||
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support | |||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality | |||
KEYMAP_IN_EEPROM_ENABLE = yes # Read keymap from eeprom | |||
#KEYMAP_SECTION_ENABLE = yes # Fixed address keymap for keymap editor | |||
SOFTPWM_LED_ENABLE = yes # Enable SoftPWM to drive backlight | |||
FADING_LED_ENABLE = yes # Enable fading backlight | |||
BREATHING_LED_ENABLE = yes # Enable breathing backlight | |||
LEDMAP_ENABLE = yes # Enable LED mapping | |||
LEDMAP_IN_EEPROM_ENABLE = yes # Read LED mapping from eeprom | |||
# Search Path | |||
VPATH += $(TARGET_DIR) | |||
VPATH += $(TOP_DIR) | |||
include $(TOP_DIR)/protocol/pjrc.mk | |||
include $(TOP_DIR)/common.mk | |||
include $(TOP_DIR)/rules.mk |
@@ -0,0 +1,204 @@ | |||
/* | |||
Copyright 2014 Kai Ryu <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include <avr/io.h> | |||
#include <avr/interrupt.h> | |||
#include <avr/pgmspace.h> | |||
#include "backlight.h" | |||
#ifdef SOFTPWM_LED_ENABLE | |||
#include "softpwm_led.h" | |||
#else | |||
#include "breathing_led.h" | |||
#endif | |||
#include "action.h" | |||
#ifdef BACKLIGHT_ENABLE | |||
static const uint8_t backlight_table[] PROGMEM = { | |||
0, 16, 128, 255 | |||
}; | |||
inline void backlight_set_raw(uint8_t raw); | |||
#ifdef SOFTPWM_LED_ENABLE | |||
#ifdef FADING_LED_ENABLE | |||
static uint8_t backlight_mode; | |||
#endif | |||
#endif | |||
/* Backlight pin configuration | |||
* PWM: PB7(OC1C) | |||
*/ | |||
#ifndef SOFTPWM_LED_ENABLE | |||
void backlight_enable(void) | |||
{ | |||
// Turn on PWM | |||
cli(); | |||
DDRB |= (1<<PB7); | |||
TCCR1A |= ( (1<<WGM10) | (1<<COM1C1) ); | |||
TCCR1B |= ( (1<<CS11) | (1<<CS10) ); | |||
sei(); | |||
} | |||
void backlight_disable(void) | |||
{ | |||
// Turn off PWM | |||
cli(); | |||
DDRB &= ~(1<<PB7); | |||
TCCR1A &= ~( (1<<WGM10) | (1<<COM1C1) ); | |||
TCCR1B &= ~( (1<<CS11) | (1<<CS10) ); | |||
sei(); | |||
} | |||
#endif | |||
void backlight_set(uint8_t level) | |||
{ | |||
#ifdef FADING_LED_ENABLE | |||
backlight_mode = level; | |||
#endif | |||
#ifdef BREATHING_LED_ENABLE | |||
switch (level) { | |||
case 1: | |||
case 2: | |||
case 3: | |||
#ifdef SOFTPWM_LED_ENABLE | |||
softpwm_led_enable(); | |||
#ifdef FADING_LED_ENABLE | |||
fading_led_disable_all(); | |||
#endif | |||
breathing_led_disable_all(); | |||
#else | |||
backlight_enable(); | |||
breathing_led_disable(); | |||
#endif | |||
backlight_set_raw(pgm_read_byte(&backlight_table[level])); | |||
break; | |||
case 4: | |||
case 5: | |||
case 6: | |||
#ifdef SOFTPWM_LED_ENABLE | |||
softpwm_led_enable(); | |||
#ifdef FADING_LED_ENABLE | |||
fading_led_disable_all(); | |||
#endif | |||
breathing_led_enable_all(); | |||
#else | |||
backlight_enable(); | |||
breathing_led_enable(); | |||
#endif | |||
breathing_led_set_duration(6 - level); | |||
break; | |||
#ifdef SOFTPWM_LED_ENABLE | |||
#ifdef FADING_LED_ENABLE | |||
case 7: | |||
softpwm_led_enable(); | |||
fading_led_enable_all(); | |||
breathing_led_disable_all(); | |||
fading_led_set_direction(FADING_LED_FADE_IN); | |||
fading_led_set_duration(3); | |||
break; | |||
case 8: | |||
softpwm_led_enable(); | |||
fading_led_enable_all(); | |||
breathing_led_disable_all(); | |||
fading_led_set_direction(FADING_LED_FADE_OUT); | |||
fading_led_set_duration(3); | |||
break; | |||
#endif | |||
#endif | |||
case 0: | |||
default: | |||
#ifdef SOFTPWM_LED_ENABLE | |||
#ifdef FADING_LED_ENABLE | |||
fading_led_disable_all(); | |||
#endif | |||
breathing_led_disable_all(); | |||
softpwm_led_disable(); | |||
#else | |||
breathing_led_disable(); | |||
backlight_disable(); | |||
#endif | |||
break; | |||
} | |||
#else | |||
if (level > 0) { | |||
backlight_enable(); | |||
backlight_set_raw(pgm_read_byte(&backlight_table[level])); | |||
} | |||
else { | |||
backlight_disable(); | |||
} | |||
#endif | |||
} | |||
#ifndef SOFTPWM_LED_ENABLE | |||
#ifdef BREATHING_LED_ENABLE | |||
void breathing_led_set_raw(uint8_t raw) | |||
{ | |||
backlight_set_raw(raw); | |||
} | |||
#endif | |||
#endif | |||
inline void backlight_set_raw(uint8_t raw) | |||
{ | |||
#ifdef SOFTPWM_LED_ENABLE | |||
softpwm_led_set_all(raw); | |||
#else | |||
OCR1C = raw; | |||
#endif | |||
} | |||
#ifndef LEDMAP_ENABLE | |||
#ifdef SOFTPWM_LED_ENABLE | |||
void softpwm_led_init(void) | |||
{ | |||
DDRB |= (1<<PB7); | |||
} | |||
void softpwm_led_on(uint8_t index) | |||
{ | |||
PORTB |= (1<<PB7); | |||
} | |||
void softpwm_led_off(uint8_t index) | |||
{ | |||
PORTB &= ~(1<<PB7); | |||
} | |||
#endif | |||
#endif | |||
#ifdef SOFTPWM_LED_ENABLE | |||
#ifdef FADING_LED_ENABLE | |||
void action_keyevent(keyevent_t event) | |||
{ | |||
if (backlight_mode == 7) { | |||
if (event.pressed) { | |||
softpwm_led_decrease_all(32); | |||
} | |||
} | |||
if (backlight_mode == 8) { | |||
if (event.pressed) { | |||
softpwm_led_increase_all(32); | |||
} | |||
} | |||
} | |||
#endif | |||
#endif | |||
#endif |
@@ -0,0 +1,89 @@ | |||
/* | |||
Copyright 2014 Kai Ryu <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef CONFIG_H | |||
#define CONFIG_H | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0x5253 | |||
#define PRODUCT_ID 0x0003 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER Young Pioneers | |||
#define PRODUCT Red Scarf III | |||
#define DESCRIPTION t.m.k. keyboard firmware for Red Scarf III | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 6 | |||
#define MATRIX_COLS 18 | |||
/* keymap in eeprom */ | |||
#define FN_ACTIONS_COUNT 32 | |||
#define KEYMAPS_COUNT 8 | |||
/* define if matrix has ghost */ | |||
//#define MATRIX_HAS_GHOST | |||
/* Set 0 if debouncing isn't needed */ | |||
#define DEBOUNCE 5 | |||
/* number of backlight levels */ | |||
#ifdef BREATHING_LED_ENABLE | |||
#ifdef FADING_LED_ENABLE | |||
#define BACKLIGHT_LEVELS 8 | |||
#else | |||
#define BACKLIGHT_LEVELS 6 | |||
#endif | |||
#else | |||
#define BACKLIGHT_LEVELS 3 | |||
#endif | |||
#define BACKLIGHT_CUSTOM | |||
/* number of leds */ | |||
#define LED_COUNT 4 | |||
#define EECONFIG_LEDMAP_IN_EEPROM 8 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* key combination for command */ | |||
#define IS_COMMAND() ( \ | |||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ | |||
) | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
//#define NO_DEBUG | |||
/* disable print */ | |||
//#define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
//#define NO_ACTION_MACRO | |||
//#define NO_ACTION_FUNCTION | |||
#endif |
@@ -0,0 +1,49 @@ | |||
/* | |||
Copyright 2012,2013 Jun Wako <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "keymap_common.h" | |||
/* translates key to keycode */ | |||
uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key) | |||
{ | |||
#ifndef KEYMAP_IN_EEPROM_ENABLE | |||
return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]); | |||
#else | |||
return eeconfig_read_keymap_key(layer, key.row, key.col); | |||
#endif | |||
} | |||
/* translates Fn keycode to action */ | |||
action_t keymap_fn_to_action(uint8_t keycode) | |||
{ | |||
return (action_t) { | |||
#ifndef KEYMAP_IN_EEPROM_ENABLE | |||
.code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]) | |||
#else | |||
.code = eeconfig_read_keymap_fn_action(FN_INDEX(keycode)) | |||
#endif | |||
}; | |||
} | |||
#ifdef KEYMAP_IN_EEPROM_ENABLE | |||
const uint8_t* keymaps_pointer(void) { | |||
return (const uint8_t*)keymaps; | |||
} | |||
const uint16_t* fn_actions_pointer(void) { | |||
return fn_actions; | |||
} | |||
#endif |
@@ -0,0 +1,91 @@ | |||
/* | |||
Copyright 2014 Kai Ryu <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef KEYMAP_COMMON_H | |||
#define KEYMAP_COMMON_H | |||
#include <stdint.h> | |||
#include <stdbool.h> | |||
#include <avr/pgmspace.h> | |||
#include "keycode.h" | |||
#include "action.h" | |||
#include "action_macro.h" | |||
#include "report.h" | |||
#include "host.h" | |||
#include "print.h" | |||
#include "debug.h" | |||
#include "keymap.h" | |||
#include "keymap_in_eeprom.h" | |||
extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS]; | |||
extern const uint16_t fn_actions[]; | |||
/* RedScarfIII keymap definition macro | |||
* K3B and K2M are extra keys for ISO | |||
*/ | |||
#define KEYMAP( \ | |||
K5A, K5B, K5C, K5D, K5E, K5F, K5G, K5H, K5I, K5J, K5K, K5L, K5M, K5N, K5P, K5Q, K5R, K5S, K4I, \ | |||
K0A, K0B, K0C, K0D, K0E, K0F, K0G, K0H, K0I, K0J, K0K, K0L, K0M, K0N, K0P, K0Q, K0R, K0S, \ | |||
K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L, K1M, K1N, K1P, K1Q, K1R, K1S, \ | |||
K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, K2M, K2N, K2P, K2Q, K2R, K2S, \ | |||
K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, K3N, K3P, K3Q, K3R, K3S, \ | |||
K4A, K4B, K4C, K4J, K4K, K4L, K4M, K4N, K4P, K4Q, K4R, K4S \ | |||
) { \ | |||
{ KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_##K0F, KC_##K0G, KC_##K0H, KC_##K0I, KC_##K0J, KC_##K0K, KC_##K0L, KC_##K0M, KC_##K0N, KC_##K0P, KC_##K0Q, KC_##K0R, KC_##K0S }, \ | |||
{ KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E, KC_##K1F, KC_##K1G, KC_##K1H, KC_##K1I, KC_##K1J, KC_##K1K, KC_##K1L, KC_##K1M, KC_##K1N, KC_##K1P, KC_##K1Q, KC_##K1R, KC_##K1S }, \ | |||
{ KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_##K2F, KC_##K2G, KC_##K2H, KC_##K2I, KC_##K2J, KC_##K2K, KC_##K2L, KC_##K2M, KC_##K2N, KC_##K2P, KC_##K2Q, KC_##K2R, KC_##K2S }, \ | |||
{ KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E, KC_##K3F, KC_##K3G, KC_##K3H, KC_##K3I, KC_##K3J, KC_##K3K, KC_##K3L, KC_##K3M, KC_##K3N, KC_##K3P, KC_##K3Q, KC_##K3R, KC_##K3S }, \ | |||
{ KC_##K4A, KC_##K4B, KC_##K4C, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_##K4I, KC_##K4J, KC_##K4K, KC_##K4L, KC_##K4M, KC_##K4N, KC_##K4P, KC_##K4Q, KC_##K4R, KC_##K4S }, \ | |||
{ KC_##K5A, KC_##K5B, KC_##K5C, KC_##K5D, KC_##K5E, KC_##K5F, KC_##K5G, KC_##K5H, KC_##K5I, KC_##K5J, KC_##K5K, KC_##K5L, KC_##K5M, KC_##K5N, KC_##K5P, KC_##K5Q, KC_##K5R, KC_##K5S } \ | |||
} | |||
/* 84 layout. Cut-off right part */ | |||
#define KEYMAP_84( \ | |||
K5A, K5B, K5C, K5D, K5E, K5F, K5G, K5H, K5I, K5J, K5K, K5L, K5M, K5N, K5P, \ | |||
K0A, K0B, K0C, K0D, K0E, K0F, K0G, K0H, K0I, K0J, K0K, K0L, K0M, K0N, \ | |||
K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L, K1M, K1N, \ | |||
K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, K2M, K2N, \ | |||
K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, K3N, \ | |||
K4A, K4B, K4C, K4J, K4K, K4L, K4M, K4N \ | |||
) KEYMAP( \ | |||
K5A, K5B, K5C, K5D, K5E, K5F, K5G, K5H, K5I, K5J, K5K, K5L, K5M, K5N, K5P, NO, NO, NO, NO, \ | |||
K0A, K0B, K0C, K0D, K0E, K0F, K0G, K0H, K0I, K0J, K0K, K0L, K0M, K0N, NO, NO, NO, NO, \ | |||
K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L, K1M, K1N, NO, NO, NO, NO, \ | |||
K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, K2M, K2N, NO, NO, NO, NO, \ | |||
K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, K3N, NO, NO, NO, NO, \ | |||
K4A, K4B, K4C, K4J, K4K, K4L, K4M, K4N, NO, NO, NO, NO \ | |||
) | |||
/* ANSI valiant. No extra keys for ISO */ | |||
#define KEYMAP_ANSI( \ | |||
K5A, K5B, K5C, K5D, K5E, K5F, K5G, K5H, K5I, K5J, K5K, K5L, K5M, K5N, K5P, K5Q, K5R, K5S, K4I, \ | |||
K0A, K0B, K0C, K0D, K0E, K0F, K0G, K0H, K0I, K0J, K0K, K0L, K0M, K0N, K0P, K0Q, K0R, K0S, \ | |||
K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L, K1M, K1N, K1P, K1Q, K1R, \ | |||
K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, K2N, K2P, K2Q, K2R, K2S, \ | |||
K3A, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, K3N, K3P, K3Q, K3R, \ | |||
K4A, K4B, K4C, K4J, K4K, K4L, K4M, K4N, K4P, K4Q, K4R, K4S \ | |||
) KEYMAP_NORMAL( \ | |||
K5A, K5B, K5C, K5D, K5E, K5F, K5G, K5H, K5I, K5J, K5K, K5L, K5M, K5N, K5P, K5Q, K5R, K5S, K4I, \ | |||
K0A, K0B, K0C, K0D, K0E, K0F, K0G, K0H, K0I, K0J, K0K, K0L, K0M, K0N, K0P, K0Q, K0R, K0S, \ | |||
K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L, K1M, K1N, K1P, K1Q, K1R, NO, \ | |||
K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, NO, K2N, K2P, K2Q, K2R, K2S, \ | |||
K3A, NO, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, K3N, K3P, K3Q, K3R, NO, \ | |||
K4A, K4B, K4C, K4J, K4K, K4L, K4M, K4N, K4P, K4Q, K4R, K4S \ | |||
) | |||
#endif |
@@ -0,0 +1,162 @@ | |||
#include "keymap_common.h" | |||
#include "rgb.h" | |||
// Default | |||
#ifdef KEYMAP_SECTION_ENABLE | |||
const uint8_t keymaps[KEYMAPS_COUNT][MATRIX_ROWS][MATRIX_COLS] __attribute__ ((section (".keymap.keymaps"))) = { | |||
#else | |||
const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = { | |||
#endif | |||
/* Keymap 0: Default Layer | |||
* ,---------------------------------------------------------------------------. | |||
* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Psc|Pau|Ins|Del|PgU|PgD| | |||
* |-----------------------------------------------------------+---+---+---+---| | |||
* | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp |Num| /| *| -| | |||
* |-----------------------------------------------------------+---+---+---+---| | |||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| 7| 8| 9| | | |||
* |-----------------------------------------------------------+---+---+---| +| | |||
* |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return | 4| 5| 6| | | |||
* |-----------------------------------------------------------+---+---+---+---| | |||
* |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |Fn0| 1| 2| 3| | | |||
* |-----------------------------------------------------------+---+---+---|Ent| | |||
* |Ctrl|Gui |Alt | Space |Alt |Fn0 |Gui |Ctrl| 0| 0| .| | | |||
* `---------------------------------------------------------------------------' | |||
*/ | |||
KEYMAP( | |||
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,PAUS,INS, DEL, PGUP,PGDN, \ | |||
GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC,NLCK,PSLS,PAST,PMNS, \ | |||
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, BSLS,P7, P8, P9, PPLS, \ | |||
CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT,GRV, ENT, P4, P5, P6, PPLS, \ | |||
LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RSFT,FN0, P1, P2, P3, PENT, \ | |||
LCTL,LGUI,LALT, SPC, RALT,FN0, RGUI, RCTL,P0, P0, PDOT,PENT ), | |||
/* Keymap 1: Fn Layer | |||
* ,---------------------------------------------------------------------------. | |||
* | *4| *5| *6| *7| *8|*21|*22|*23|*24| | | | | | | | | | | | |||
* |-----------------------------------------------------------+---+---+---+---| | |||
* | | *9|*10|*11| | | | | | | |*25|*26| | | | | | | |||
* |-----------------------------------------------------------+---+---+---+---| | |||
* | |*12|*13|*14| | |Cal| |Ins| |Psc|Slk|Pau| | | | | | | |||
* |-----------------------------------------------------------|---+---+---| | | |||
* | |*15|*16|*17| | | | | | |Hom|PgU| | | | | | | |||
* |-----------------------------------------------------------|---+---+---+---| | |||
* | |*18|*19|*20|Fn1|Fn2|VoD|VoU|Mut|End|PgD| | | | | | | | |||
* |-----------------------------------------------------------+---+---+---| | | |||
* | | | | Fn3 | | | | | | | | | | |||
* `---------------------------------------------------------------------------' | |||
*/ | |||
KEYMAP( | |||
FN4 ,FN5 ,FN6 ,FN7 ,FN8 ,FN21,FN22,FN23,FN24,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ | |||
TRNS,FN9 ,FN10,FN11,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,FN25,FN26, TRNS,TRNS,TRNS,TRNS,TRNS, \ | |||
TRNS,FN12,FN13,FN14,TRNS,TRNS,CALC,TRNS,INS, TRNS,PSCR,SLCK,PAUS, TRNS,TRNS,TRNS,TRNS,TRNS, \ | |||
TRNS,FN15,FN16,FN17,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,HOME,PGUP,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS, \ | |||
TRNS,TRNS,FN18,FN19,FN20,FN1, FN2, VOLD,VOLU,MUTE,END, PGDN, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ | |||
TRNS,TRNS,TRNS, FN3, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS ), | |||
/* Keymap 2: Arrow key Overlayer | |||
* ,---------------------------------------------------------------------------. | |||
* | | | | | | | | | | | | | | | | | | | | | |||
* |-----------------------------------------------------------+---+---+---+---| | |||
* | | | | | | | | | | | | | | | | | | | | |||
* |-----------------------------------------------------------+---+---+---+---| | |||
* | | | | | | | | | | | | | | | | | | | | |||
* |-----------------------------------------------------------+---+---+---| | | |||
* | | | | | | | | | | | | | | | | | | | |||
* |-----------------------------------------------------------+---+---+---+---| | |||
* | | | | | | | | | | | | | |Up | | | | |||
* |-----------------------------------------------------------+---+---+---| | | |||
* | | | | | | | | |Lef|Dow|Rig| | | |||
* `---------------------------------------------------------------------------' | |||
*/ | |||
KEYMAP( | |||
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ | |||
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS, \ | |||
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS, \ | |||
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS, \ | |||
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,UP, TRNS,TRNS, \ | |||
TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS, TRNS,LEFT,DOWN,RGHT,TRNS ), | |||
}; | |||
enum function_id { | |||
AF_RGB_ON = 0, | |||
AF_RGB_OFF, | |||
AF_RGB_TOGGLE, | |||
AF_RGB_INCREASE, | |||
AF_RGB_DECREASE, | |||
AF_RGB_STATIC, | |||
AF_RGB_ANIMATE | |||
}; | |||
/* | |||
* Fn action definition | |||
*/ | |||
#ifdef KEYMAP_SECTION_ENABLE | |||
const uint16_t fn_actions[FN_ACTIONS_COUNT] __attribute__ ((section (".keymap.fn_actions"))) = { | |||
#else | |||
const uint16_t fn_actions[] PROGMEM = { | |||
#endif | |||
[0] = ACTION_LAYER_MOMENTARY(1), | |||
[1] = ACTION_BACKLIGHT_TOGGLE(), | |||
[2] = ACTION_BACKLIGHT_STEP(), | |||
[3] = ACTION_LAYER_TOGGLE(2), | |||
[4] = ACTION_FUNCTION(AF_RGB_TOGGLE), | |||
[5] = ACTION_FUNCTION_OPT(AF_RGB_STATIC, RGB_STATIC_RED), | |||
[6] = ACTION_FUNCTION_OPT(AF_RGB_STATIC, RGB_STATIC_GREEN), | |||
[7] = ACTION_FUNCTION_OPT(AF_RGB_STATIC, RGB_STATIC_BLUE), | |||
[8] = ACTION_FUNCTION_OPT(AF_RGB_STATIC, RGB_STATIC_WHITE), | |||
[9] = ACTION_FUNCTION_OPT(AF_RGB_STATIC, RGB_STATIC_RED_1), | |||
[10] = ACTION_FUNCTION_OPT(AF_RGB_STATIC, RGB_STATIC_GREEN_1), | |||
[11] = ACTION_FUNCTION_OPT(AF_RGB_STATIC, RGB_STATIC_BLUE_1), | |||
[12] = ACTION_FUNCTION_OPT(AF_RGB_STATIC, RGB_STATIC_RED_2), | |||
[13] = ACTION_FUNCTION_OPT(AF_RGB_STATIC, RGB_STATIC_GREEN_2), | |||
[14] = ACTION_FUNCTION_OPT(AF_RGB_STATIC, RGB_STATIC_BLUE_2), | |||
[15] = ACTION_FUNCTION_OPT(AF_RGB_STATIC, RGB_STATIC_RED_3), | |||
[16] = ACTION_FUNCTION_OPT(AF_RGB_STATIC, RGB_STATIC_GREEN_3), | |||
[17] = ACTION_FUNCTION_OPT(AF_RGB_STATIC, RGB_STATIC_BLUE_3), | |||
[18] = ACTION_FUNCTION_OPT(AF_RGB_STATIC, RGB_STATIC_RED_4), | |||
[19] = ACTION_FUNCTION_OPT(AF_RGB_STATIC, RGB_STATIC_GREEN_4), | |||
[20] = ACTION_FUNCTION_OPT(AF_RGB_STATIC, RGB_STATIC_BLUE_4), | |||
[21] = ACTION_FUNCTION_OPT(AF_RGB_ANIMATE, RGB_ANIMATE_FLASH), | |||
[22] = ACTION_FUNCTION_OPT(AF_RGB_ANIMATE, RGB_ANIMATE_STROBE), | |||
[23] = ACTION_FUNCTION_OPT(AF_RGB_ANIMATE, RGB_ANIMATE_FADE), | |||
[24] = ACTION_FUNCTION_OPT(AF_RGB_ANIMATE, RGB_ANIMATE_SMOOTH), | |||
[25] = ACTION_FUNCTION(AF_RGB_DECREASE), | |||
[26] = ACTION_FUNCTION(AF_RGB_INCREASE) | |||
}; | |||
#ifdef KEYMAP_IN_EEPROM_ENABLE | |||
uint16_t keys_count(void) { | |||
return sizeof(keymaps) / sizeof(keymaps[0]) * MATRIX_ROWS * MATRIX_COLS; | |||
} | |||
uint16_t fn_actions_count(void) { | |||
return sizeof(fn_actions) / sizeof(fn_actions[0]); | |||
} | |||
#endif | |||
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) | |||
{ | |||
if (record->event.pressed) { | |||
switch (id) { | |||
case AF_RGB_ON: | |||
rgb_on(); | |||
break; | |||
case AF_RGB_OFF: | |||
rgb_off(); | |||
break; | |||
case AF_RGB_TOGGLE: | |||
rgb_toggle(); | |||
break; | |||
case AF_RGB_INCREASE: | |||
rgb_increase(); | |||
break; | |||
case AF_RGB_DECREASE: | |||
rgb_decrease(); | |||
break; | |||
case AF_RGB_STATIC: | |||
rgb_set(RGB_STATIC, opt); | |||
break; | |||
case AF_RGB_ANIMATE: | |||
rgb_set(RGB_ANIMATE, opt); | |||
break; | |||
} | |||
} | |||
} |
@@ -0,0 +1,62 @@ | |||
/* | |||
Copyright 2014 Kai Ryu <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include <avr/io.h> | |||
#include "stdint.h" | |||
#include "led.h" | |||
#ifndef LEDMAP_ENABLE | |||
/* LED pin configuration | |||
* CapsLock: PC7 | |||
* NumLock: PE6 | |||
*/ | |||
void led_set(uint8_t usb_led) | |||
{ | |||
if (usb_led & (1<<USB_LED_CAPS_LOCK)) { | |||
// output low | |||
DDRC |= (1<<PC7); | |||
PORTC &= ~(1<<PC7); | |||
} | |||
else { | |||
// Hi-Z | |||
DDRC &= ~(1<<PC7); | |||
PORTC &= ~(1<<PC7); | |||
} | |||
if (usb_led & (1<<USB_LED_NUM_LOCK)) { | |||
// output low | |||
DDRE |= (1<<PE6); | |||
PORTE &= ~(1<<PE6); | |||
} | |||
else { | |||
// Hi-Z | |||
DDRE &= ~(1<<PE6); | |||
PORTE &= ~(1<<PE6); | |||
} | |||
if (usb_led & (1<<USB_LED_SCROLL_LOCK)) { | |||
// output high | |||
DDRC |= (1<<PC6); | |||
PORTC |= (1<<PC6); | |||
} | |||
else { | |||
// Hi-Z | |||
DDRC &= ~(1<<PC6); | |||
PORTC &= ~(1<<PC6); | |||
} | |||
} | |||
#endif |
@@ -0,0 +1,79 @@ | |||
/* | |||
Copyright 2014 Kai Ryu <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include <avr/pgmspace.h> | |||
#include "ledmap.h" | |||
#ifdef LEDMAP_ENABLE | |||
static const uint16_t ledmaps[LED_COUNT] PROGMEM = { | |||
[0] = LEDMAP_CAPS_LOCK | LEDMAP_BACKLIGHT, // CapsLock | |||
[1] = LEDMAP_NUM_LOCK | LEDMAP_BACKLIGHT, // NumLock | |||
[2] = LEDMAP_BACKLIGHT, // Backlight | |||
}; | |||
ledmap_t ledmap_get_code(uint8_t index) | |||
{ | |||
return (ledmap_t) { .code = pgm_read_word(&ledmaps[index]) }; | |||
} | |||
/* LED pin configration | |||
* CapsLock: PC7 | |||
* NumLock: PE6 | |||
* Backlight: PB7 | |||
*/ | |||
void ledmap_led_init(void) | |||
{ | |||
DDRC |= (1<<PC7); | |||
PORTC |= (1<<PC7); | |||
DDRE |= (1<<PE6); | |||
PORTE |= (1<<PE6); | |||
DDRB |= (1<<PB7); | |||
PORTB &= ~(1<<PB7); | |||
} | |||
void ledmap_led_on(uint8_t index) | |||
{ | |||
switch (index) { | |||
case 0: | |||
PORTC &= ~(1<<PC7); | |||
break; | |||
case 1: | |||
PORTE &= ~(1<<PE6); | |||
break; | |||
case 2: | |||
PORTB |= (1<<PB7); | |||
break; | |||
} | |||
} | |||
void ledmap_led_off(uint8_t index) | |||
{ | |||
switch (index) { | |||
case 0: | |||
PORTC |= (1<<PC7); | |||
break; | |||
case 1: | |||
PORTE |= (1<<PE6); | |||
break; | |||
case 2: | |||
PORTB &= ~(1<<PB7); | |||
break; | |||
} | |||
} | |||
#endif |
@@ -0,0 +1,206 @@ | |||
/* | |||
Copyright 2014 Kai Ryu <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
/* | |||
* scan matrix | |||
*/ | |||
#include <stdint.h> | |||
#include <stdbool.h> | |||
#include <avr/io.h> | |||
#include <util/delay.h> | |||
#include "print.h" | |||
#include "debug.h" | |||
#include "util.h" | |||
#include "rgb.h" | |||
#include "matrix.h" | |||
#ifndef DEBOUNCE | |||
# define DEBOUNCE 5 | |||
#endif | |||
static uint8_t debouncing = DEBOUNCE; | |||
/* matrix state(1:on, 0:off) */ | |||
static matrix_row_t matrix[MATRIX_ROWS]; | |||
static matrix_row_t matrix_debouncing[MATRIX_ROWS]; | |||
static matrix_row_t read_cols(void); | |||
static void init_cols(void); | |||
static void init_rows(void); | |||
static void unselect_rows(void); | |||
static void select_row(uint8_t row); | |||
inline | |||
uint8_t matrix_rows(void) | |||
{ | |||
return MATRIX_ROWS; | |||
} | |||
inline | |||
uint8_t matrix_cols(void) | |||
{ | |||
return MATRIX_COLS; | |||
} | |||
void matrix_init(void) | |||
{ | |||
// disable JTAG | |||
MCUCR = (1<<JTD); | |||
MCUCR = (1<<JTD); | |||
// initialize rgb light | |||
rgb_init(); | |||
// initialize row and col | |||
init_rows(); | |||
init_cols(); | |||
// initialize matrix state: all keys off | |||
for (uint8_t i=0; i < MATRIX_ROWS; i++) { | |||
matrix[i] = 0; | |||
matrix_debouncing[i] = 0; | |||
} | |||
} | |||
uint8_t matrix_scan(void) | |||
{ | |||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) { | |||
select_row(i); | |||
_delay_us(30); // without this wait read unstable value. | |||
matrix_row_t cols = read_cols(); | |||
if (matrix_debouncing[i] != cols) { | |||
matrix_debouncing[i] = cols; | |||
if (debouncing) { | |||
debug("bounce!: "); debug_hex(debouncing); debug("\n"); | |||
} | |||
debouncing = DEBOUNCE; | |||
} | |||
unselect_rows(); | |||
} | |||
if (debouncing) { | |||
if (--debouncing) { | |||
_delay_ms(1); | |||
} else { | |||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) { | |||
matrix[i] = matrix_debouncing[i]; | |||
} | |||
} | |||
} | |||
return 1; | |||
} | |||
bool matrix_is_modified(void) | |||
{ | |||
if (debouncing) return false; | |||
return true; | |||
} | |||
inline | |||
bool matrix_is_on(uint8_t row, uint8_t col) | |||
{ | |||
return (matrix[row] & ((matrix_row_t)1<<col)); | |||
} | |||
inline | |||
matrix_row_t matrix_get_row(uint8_t row) | |||
{ | |||
return matrix[row]; | |||
} | |||
void matrix_print(void) | |||
{ | |||
print("\nr/c 0123456789ABCDEF\n"); | |||
for (uint8_t row = 0; row < MATRIX_ROWS; row++) { | |||
phex(row); print(": "); | |||
pbin_reverse16(matrix_get_row(row)); | |||
print("\n"); | |||
} | |||
} | |||
uint8_t matrix_key_count(void) | |||
{ | |||
uint8_t count = 0; | |||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) { | |||
count += bitpop16(matrix[i]); | |||
} | |||
return count; | |||
} | |||
/* Column pin configuration | |||
* col: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 | |||
* pin: F4 F1 F0 B3 D0 D1 D4 D5 D6 D7 F7 F6 D2 D3 B6 B5 B4 F5 | |||
*/ | |||
static void init_cols(void) | |||
{ | |||
// Input with pull-up(DDR:0, PORT:1) | |||
DDRF &= ~(1<<PF7 | 1<<PF6 | 1<<PF5 | 1<<PF4 | 1<<PF1 | 1<<PF0); | |||
PORTF |= (1<<PF7 | 1<<PF6 | 1<<PF5 | 1<<PF4 | 1<<PF1 | 1<<PF0); | |||
DDRD &= ~(1<<PD7 | 1<<PD6 | 1<<PD5 | 1<<PD4 | 1<<PD3 | 1<<PD2 | 1<<PD1 | 1<<PD0); | |||
PORTD |= (1<<PD7 | 1<<PD6 | 1<<PD5 | 1<<PD4 | 1<<PD3 | 1<<PD2 | 1<<PD1 | 1<<PD0); | |||
DDRB &= ~(1<<PB6 | 1<<PB5 | 1<<PB4 | 1<<PB3); | |||
PORTB |= (1<<PB6 | 1<<PB5 | 1<<PB4 | 1<<PB3); | |||
} | |||
static matrix_row_t read_cols(void) | |||
{ | |||
return (PINF&(1<<PF4) ? 0 : (1<<0)) | | |||
(PINF&(1<<PF1) ? 0 : (1<<1)) | | |||
(PINF&(1<<PF0) ? 0 : (1<<2)) | | |||
(PINB&(1<<PB3) ? 0 : (1<<3)) | | |||
(PIND&(1<<PD0) ? 0 : (1<<4)) | | |||
(PIND&(1<<PD1) ? 0 : (1<<5)) | | |||
(PIND&(1<<PD4) ? 0 : (1<<6)) | | |||
(PIND&(1<<PD5) ? 0 : (1<<7)) | | |||
(PIND&(1<<PD6) ? 0 : (1<<8)) | | |||
(PIND&(1<<PD7) ? 0 : (1<<9)) | | |||
(PINF&(1<<PF7) ? 0 : (1<<10)) | | |||
(PINF&(1<<PF6) ? 0 : (1<<11)) | | |||
(PIND&(1<<PD2) ? 0 : (1<<12)) | | |||
(PIND&(1<<PD3) ? 0 : (1<<13)) | | |||
(PINB&(1<<PB6) ? 0 : (1<<14)) | | |||
(PINB&(1<<PB5) ? 0 : (1UL<<15)) | | |||
(PINB&(1<<PB4) ? 0 : (1UL<<16)) | | |||
(PINF&(1<<PF5) ? 0 : (1UL<<17)); | |||
} | |||
/* Row pin configuration | |||
* row: 0 1 2 3 4 5 x | |||
* pin: B2 0 1 0 1 0 1 1 | |||
* B1 0 0 1 1 0 0 1 | |||
* B0 0 0 0 0 1 1 1 | |||
*/ | |||
static void init_rows(void) | |||
{ | |||
DDRB |= (1<<PB2 | 1<<PB1 | 1<<PB0); | |||
} | |||
static void unselect_rows(void) | |||
{ | |||
// Select Y7 | |||
//PORTB |= (1<<PB2 | 1<<PB1 | 1<<PB0); | |||
PORTB |= (1<<PB2); | |||
PORTB |= (1<<PB1); | |||
PORTB |= (1<<PB0); | |||
} | |||
static void select_row(uint8_t row) | |||
{ | |||
(row & (1<<0)) ? (PORTB |= (1<<PB2)) : (PORTB &= ~(1<<PB2)); | |||
(row & (1<<1)) ? (PORTB |= (1<<PB1)) : (PORTB &= ~(1<<PB1)); | |||
(row & (1<<2)) ? (PORTB |= (1<<PB0)) : (PORTB &= ~(1<<PB0)); | |||
} |
@@ -0,0 +1,114 @@ | |||
/* | |||
Copyright 2014 Kai Ryu <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include <avr/eeprom.h> | |||
#include "yc059.h" | |||
#include "rgb.h" | |||
static rgb_config_t rgb_config; | |||
void rgb_init(void) | |||
{ | |||
yc059_init(); | |||
rgb_read_config(); | |||
if (rgb_config.raw == RGB_UNCONFIGURED) { | |||
rgb_config.enable = 0; | |||
rgb_config.mode = RGB_STATIC; | |||
rgb_config.id = RGB_STATIC_WHITE; | |||
rgb_write_config(); | |||
} | |||
yc059_send(rgb_config.enable ? YC059_ON : YC059_OFF); | |||
rgb_resume(); | |||
} | |||
void rgb_resume(void) | |||
{ | |||
yc059_send(rgb_to_yc059(rgb_config.mode, rgb_config.id)); | |||
} | |||
void rgb_read_config(void) | |||
{ | |||
rgb_config.raw = eeprom_read_byte(EECONFIG_RGB); | |||
} | |||
void rgb_write_config(void) | |||
{ | |||
eeprom_write_byte(EECONFIG_RGB, rgb_config.raw); | |||
} | |||
void rgb_on(void) | |||
{ | |||
rgb_config.enable = 1; | |||
yc059_send(YC059_ON); | |||
rgb_resume(); | |||
rgb_write_config(); | |||
} | |||
void rgb_off(void) | |||
{ | |||
rgb_config.enable = 0; | |||
yc059_send(YC059_OFF); | |||
rgb_write_config(); | |||
} | |||
void rgb_toggle(void) | |||
{ | |||
rgb_config.enable ^= 1; | |||
yc059_send(rgb_config.enable ? YC059_ON : YC059_OFF); | |||
rgb_resume(); | |||
rgb_write_config(); | |||
} | |||
void rgb_increase(void) | |||
{ | |||
yc059_send(YC059_INCREASE); | |||
} | |||
void rgb_decrease(void) | |||
{ | |||
yc059_send(YC059_DECREASE); | |||
} | |||
void rgb_set(uint8_t mode, uint8_t id) | |||
{ | |||
if (rgb_config.enable) { | |||
rgb_config.mode = mode; | |||
rgb_config.id = id; | |||
rgb_resume(); | |||
rgb_write_config(); | |||
} | |||
} | |||
uint8_t rgb_to_yc059(uint8_t mode, uint8_t id) | |||
{ | |||
switch (mode) { | |||
case RGB_STATIC: | |||
if (id == RGB_STATIC_WHITE) { | |||
return YC059_STATIC_WHITE; | |||
} | |||
else { | |||
return YC059_STATIC_RED + (id / 3) * 4 + id % 3; | |||
} | |||
break; | |||
case RGB_ANIMATE: | |||
return YC059_FLASH + id * 4; | |||
break; | |||
default: | |||
return YC059_OFF; | |||
break; | |||
} | |||
} |
@@ -0,0 +1,79 @@ | |||
/* | |||
Copyright 2014 Kai Ryu <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef RGB_H | |||
#define RGB_H | |||
#include <stdint.h> | |||
#include <stdbool.h> | |||
enum rgb_mode_id { | |||
RGB_STATIC, | |||
RGB_ANIMATE | |||
}; | |||
enum rgb_static_id { | |||
RGB_STATIC_RED, | |||
RGB_STATIC_GREEN, | |||
RGB_STATIC_BLUE, | |||
RGB_STATIC_RED_1, | |||
RGB_STATIC_GREEN_1, | |||
RGB_STATIC_BLUE_1, | |||
RGB_STATIC_RED_2, | |||
RGB_STATIC_GREEN_2, | |||
RGB_STATIC_BLUE_2, | |||
RGB_STATIC_RED_3, | |||
RGB_STATIC_GREEN_3, | |||
RGB_STATIC_BLUE_3, | |||
RGB_STATIC_RED_4, | |||
RGB_STATIC_GREEN_4, | |||
RGB_STATIC_BLUE_4, | |||
RGB_STATIC_WHITE | |||
}; | |||
enum rgb_animate_id { | |||
RGB_ANIMATE_FLASH, | |||
RGB_ANIMATE_STROBE, | |||
RGB_ANIMATE_FADE, | |||
RGB_ANIMATE_SMOOTH | |||
}; | |||
typedef union { | |||
uint8_t raw; | |||
struct { | |||
uint8_t id :4; | |||
uint8_t mode :3; | |||
bool enable :1; | |||
}; | |||
} rgb_config_t; | |||
#define EECONFIG_RGB (uint8_t *)7 | |||
#define RGB_UNCONFIGURED 0xFF | |||
void rgb_init(void); | |||
void rgb_resume(void); | |||
void rgb_read_config(void); | |||
void rgb_write_config(void); | |||
void rgb_on(void); | |||
void rgb_off(void); | |||
void rgb_toggle(void); | |||
void rgb_increase(void); | |||
void rgb_decrease(void); | |||
void rgb_set(uint8_t mode, uint8_t id); | |||
uint8_t rgb_to_yc059(uint8_t mode, uint8_t id); | |||
#endif |
@@ -0,0 +1,93 @@ | |||
/* | |||
Copyright 2014 Kai Ryu <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include <util/delay.h> | |||
#include <avr/io.h> | |||
#include "yc059.h" | |||
#include "debug.h" | |||
inline | |||
void yc059_ir_high(void) | |||
{ | |||
YC059_IR_PORT &= ~(1<<YC059_IR_BIT); | |||
} | |||
inline | |||
void yc059_ir_low(void) | |||
{ | |||
YC059_IR_PORT |= (1<<YC059_IR_BIT); | |||
} | |||
void yc059_init(void) | |||
{ | |||
YC059_IR_DDR |= (1<<YC059_IR_BIT); | |||
YC059_IR_PORT &= ~(1<<YC059_IR_BIT); | |||
} | |||
void yc059_send(uint8_t data) | |||
{ | |||
yc059_send_header(); | |||
yc059_send_address(); | |||
yc059_send_byte(data); | |||
yc059_send_byte(~data); | |||
yc059_send_stop(); | |||
} | |||
inline | |||
void yc059_send_header(void) | |||
{ | |||
yc059_ir_high(); | |||
_delay_us(YC059_HDR_MARK); | |||
yc059_ir_low(); | |||
_delay_us(YC059_HDR_SPACE); | |||
} | |||
inline | |||
void yc059_send_stop(void) | |||
{ | |||
yc059_ir_high(); | |||
_delay_us(YC059_BIT_MARK); | |||
yc059_ir_low(); | |||
} | |||
inline | |||
void yc059_send_address(void) | |||
{ | |||
yc059_send_word(YC059_ADDRESS); | |||
} | |||
void yc059_send_byte(uint8_t byte) | |||
{ | |||
for (uint8_t i = 0; i < 8; i++) { | |||
yc059_ir_high(); | |||
_delay_us(YC059_BIT_MARK); | |||
yc059_ir_low(); | |||
if (byte & 1) { | |||
_delay_us(YC059_ONE_SPACE); | |||
} | |||
else { | |||
_delay_us(YC059_ZERO_SPACE); | |||
} | |||
byte >>= 1; | |||
} | |||
} | |||
void yc059_send_word(uint16_t word) | |||
{ | |||
yc059_send_byte((word & 0xFF00) >> 8); | |||
yc059_send_byte(word & 0xFF); | |||
} |
@@ -0,0 +1,72 @@ | |||
/* | |||
Copyright 2014 Kai Ryu <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef YC059_H | |||
#define YC059_H | |||
#include <stdint.h> | |||
#define YC059_FREQ 38000 | |||
#define YC059_ADDRESS 0x00EF | |||
#define YC059_HDR_MARK 9000 | |||
#define YC059_HDR_SPACE 4500 | |||
#define YC059_BIT_MARK 560 | |||
#define YC059_ONE_SPACE 1600 | |||
#define YC059_ZERO_SPACE 560 | |||
#define YC059_RPT_SPACE 2250 | |||
#define YC059_IR_DDR DDRC | |||
#define YC059_IR_PORT PORTC | |||
#define YC059_IR_BIT PC6 | |||
enum yc059_id { | |||
YC059_INCREASE = 0, | |||
YC059_DECREASE, | |||
YC059_OFF, | |||
YC059_ON, | |||
YC059_STATIC_RED, | |||
YC059_STATIC_GREEN, | |||
YC059_STATIC_BLUE, | |||
YC059_STATIC_WHITE, | |||
YC059_STATIC_RED_1, | |||
YC059_STATIC_GREEN_1, | |||
YC059_STATIC_BLUE_1, | |||
YC059_FLASH, | |||
YC059_STATIC_RED_2, | |||
YC059_STATIC_GREEN_2, | |||
YC059_STATIC_BLUE_2, | |||
YC059_STROBE, | |||
YC059_STATIC_RED_3, | |||
YC059_STATIC_GREEN_3, | |||
YC059_STATIC_BLUE_3, | |||
YC059_FADE, | |||
YC059_STATIC_RED_4, | |||
YC059_STATIC_GREEN_4, | |||
YC059_STATIC_BLUE_4, | |||
YC059_SMOOTH | |||
}; | |||
void yc059_init(void); | |||
void yc059_send(uint8_t data); | |||
void yc059_send_header(void); | |||
void yc059_send_address(void); | |||
void yc059_send_byte(uint8_t byte); | |||
void yc059_send_word(uint16_t word); | |||
void yc059_send_stop(void); | |||
#endif |