Add support for Adafruit's Bluefruitkeymap_in_eeprom
@@ -0,0 +1,113 @@ | |||
# Target file name (without extension). | |||
TARGET = terminal_bluefruit | |||
# Directory common source filess exist | |||
TOP_DIR = ../.. | |||
# Directory keyboard dependent files exist | |||
TARGET_DIR = . | |||
# keyboard dependent files | |||
SRC = keymap.c \ | |||
matrix.c \ | |||
led.c | |||
CONFIG_H = config.h | |||
BLUEFRUIT_TRACE_SERIAL=true | |||
# MCU name, you MUST set this to match the board you are using | |||
# type "make clean" after changing this, so all files will be rebuilt | |||
#MCU = at90usb162 # Teensy 1.0 | |||
MCU = atmega32u4 # Teensy 2.0 | |||
#MCU = at90usb646 # Teensy++ 1.0 | |||
#MCU = at90usb1286 # Teensy++ 2.0 | |||
# Processor frequency. | |||
# Normally the first thing your program should do is set the clock prescaler, | |||
# so your program will run at the correct speed. You should also set this | |||
# variable to same clock speed. The _delay_ms() macro uses this, and many | |||
# examples use this variable to calculate timings. Do not add a "UL" here. | |||
F_CPU = 16000000 | |||
# | |||
# LUFA specific | |||
# | |||
# Target architecture (see library "Board Types" documentation). | |||
ARCH = AVR8 | |||
# Input clock frequency. | |||
# This will define a symbol, F_USB, in all source code files equal to the | |||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||
# at the end, this will be done automatically to create a 32-bit value in your | |||
# source code. | |||
# | |||
# If no clock division is performed on the input clock inside the AVR (via the | |||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||
F_USB = $(F_CPU) | |||
# Interrupt driven control endpoint task | |||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||
# Boot Section Size in bytes | |||
# Teensy halfKay 512 | |||
# Atmel DFU loader 4096 | |||
# LUFA bootloader 4096 | |||
OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||
# Build Options | |||
# comment out to disable the options. | |||
# | |||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||
CONSOLE_ENABLE = yes # Console for debug(+400) | |||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend | |||
#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA | |||
# | |||
# PS/2 protocol implementations | |||
# USART is recommended if it is available, others are for reference purpose. | |||
# INT implementation will drop simultaneous key strokes. | |||
# | |||
#PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomened) | |||
PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin | |||
#PS2_USE_BUSYWAIT = yes # uses primitive reference code | |||
ifdef PS2_USE_USART | |||
SRC += protocol/ps2_usart.c | |||
OPT_DEFS += -DPS2_USE_USART | |||
endif | |||
ifdef PS2_USE_INT | |||
SRC += protocol/ps2.c | |||
OPT_DEFS += -DPS2_USE_INT | |||
endif | |||
ifdef PS2_USE_BUSYWAIT | |||
SRC += protocol/ps2.c | |||
OPT_DEFS += -DPS2_USE_BUSYWAIT | |||
endif | |||
#---------------- Programming Options -------------------------- | |||
PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex | |||
# Search Path | |||
VPATH += $(TARGET_DIR) | |||
VPATH += $(TOP_DIR) | |||
include $(TOP_DIR)/protocol/bluefruit.mk | |||
include $(TOP_DIR)/protocol.mk | |||
include $(TOP_DIR)/common.mk | |||
include $(TOP_DIR)/rules.mk |
@@ -0,0 +1,37 @@ | |||
Keyboard converter for IBM terminal keyboard | |||
============================================ | |||
It supports PS/2 Scan Code Set 3 and runs on USB AVR chips such like PJRC Teensy. | |||
I tested the converter on ATMega32U4 with 1392595(102keys) and 6110345(122keys). | |||
Source code: https://github.com/tmk/tmk_keyboard | |||
Article: http://geekhack.org/index.php?topic=27272.0 | |||
CONNECTION | |||
---------- | |||
Keyboard ATMega32U4 | |||
---------------------- | |||
Data: PD2 | |||
Clock: PD5 | |||
And VCC and GND, of course. See RESOURCE for keyboard connector pin assign. | |||
BUILD | |||
----- | |||
$ git clone https://github.com/tmk/tmk_keyboard.git | |||
$ cd converter/terminal_usb | |||
$ make | |||
RESOURCE | |||
-------- | |||
Soarer's Converter: http://geekhack.org/index.php?topic=17458.0 | |||
102keys(1392595): http://geekhack.org/index.php?topic=10737.0 | |||
122keys(1390876): http://www.seasip.info/VintagePC/ibm_1390876.html | |||
KbdBabel: http://www.kbdbabel.org/ | |||
RJ45 Connector: http://www.kbdbabel.org/conn/kbd_connector_ibmterm.png | |||
DIN Connector: http://www.kbdbabel.org/conn/kbd_connector_ibm3179_318x_319x.png | |||
WinAVR: http://winavr.sourceforge.net/ | |||
EOF |
@@ -0,0 +1,112 @@ | |||
/* | |||
Converter for 70% IBM Terminal Keyboard | |||
Author: Benjamin Gould, 2013 | |||
Based on code Copyright 2011 Jun Wako <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef CONFIG_H | |||
#define CONFIG_H | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x6535 | |||
#define DEVICE_VER 0x0100 | |||
#define MANUFACTURER t.m.k. | |||
#define PRODUCT 70% IBM Terminal Keyboard Converter w/ Bluetooth | |||
#define DESCRIPTION USB converter for IBM Terminal Keyboard w/ Bluetooth | |||
/* matrix size */ | |||
#define MATRIX_ROWS 17 // keycode bit: 3-0 | |||
#define MATRIX_COLS 8 // keycode bit: 6-4 | |||
/* legacy keymap support */ | |||
// #define USE_LEGACY_KEYMAP | |||
/* key combination for command */ | |||
#define IS_COMMAND() ( \ | |||
(keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) || \ | |||
(keyboard_report->mods == (MOD_BIT(KC_RALT) | MOD_BIT(KC_RCTL))) \ | |||
) | |||
/* USART configuration | |||
* asynchronous, 9600baud, 8-data bit, non parity, 1-stop bit, no flow control | |||
*/ | |||
#ifdef __AVR_ATmega32U4__ | |||
#define SERIAL_UART_BAUD 9600 | |||
#define SERIAL_UART_DATA UDR1 | |||
#define SERIAL_UART_UBRR ((F_CPU/(16UL*SERIAL_UART_BAUD))-1) | |||
#define SERIAL_UART_RXD_VECT USART1_RX_vect | |||
#define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1)) | |||
#define SERIAL_UART_INIT() do { \ | |||
UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \ | |||
UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8); /* baud rate */ \ | |||
UCSR1B = (1<<TXEN1); /* TX: enable */ \ | |||
UCSR1C = (0<<UPM11) | (0<<UPM10) | /* parity: none(00), even(01), odd(11) */ \ | |||
(0<<UCSZ12) | (1<<UCSZ11) | (1<<UCSZ10); /* data-8bit(011) */ \ | |||
sei(); \ | |||
} while(0) | |||
#else | |||
# error "USART configuration is needed." | |||
#endif | |||
/* | |||
* PS/2 Interrupt configuration | |||
*/ | |||
#ifdef PS2_USE_INT | |||
/* uses INT1 for clock line(ATMega32U4) */ | |||
#define PS2_CLOCK_PORT PORTD | |||
#define PS2_CLOCK_PIN PIND | |||
#define PS2_CLOCK_DDR DDRD | |||
#define PS2_CLOCK_BIT 1 | |||
#define PS2_DATA_PORT PORTD | |||
#define PS2_DATA_PIN PIND | |||
#define PS2_DATA_DDR DDRD | |||
#define PS2_DATA_BIT 0 | |||
#define PS2_INT_INIT() do { \ | |||
EICRA |= ((1<<ISC11) | \ | |||
(0<<ISC10)); \ | |||
} while (0) | |||
#define PS2_INT_ON() do { \ | |||
EIMSK |= (1<<INT1); \ | |||
} while (0) | |||
#define PS2_INT_OFF() do { \ | |||
EIMSK &= ~(1<<INT1); \ | |||
} while (0) | |||
#define PS2_INT_VECT INT1_vect | |||
#endif | |||
/* | |||
* PS/2 Busywait configuration | |||
*/ | |||
#ifdef PS2_USE_BUSYWAIT | |||
#define PS2_CLOCK_PORT PORTD | |||
#define PS2_CLOCK_PIN PIND | |||
#define PS2_CLOCK_DDR DDRD | |||
#define PS2_CLOCK_BIT 1 | |||
#define PS2_DATA_PORT PORTD | |||
#define PS2_DATA_PIN PIND | |||
#define PS2_DATA_DDR DDRD | |||
#define PS2_DATA_BIT 0 | |||
#endif | |||
#endif |
@@ -0,0 +1,227 @@ | |||
/* | |||
Converter for 70% IBM Terminal Keyboard | |||
Author: Benjamin Gould, 2013 | |||
Based on code Copyright 2011 Jun Wako <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include <stdint.h> | |||
#include <stdbool.h> | |||
#include <avr/pgmspace.h> | |||
#include "keycode.h" | |||
#include "print.h" | |||
#include "debug.h" | |||
#include "util.h" | |||
#include "keymap.h" | |||
/* | |||
* IBM Terminal keyboard 6110345(122keys)/1392595(102keys) | |||
* http://geekhack.org/showthread.php?10737-What-Can-I-Do-With-a-Terminal-Model-M | |||
* http://www.seasip.info/VintagePC/ibm_1391406.html | |||
* | |||
* Keymap array: | |||
* 8 bytes | |||
* +---------+ | |||
* 0| | | |||
* :| | 0x00-0x87 | |||
* ;| | | |||
* 17| | | |||
* +---------+ | |||
*/ | |||
#define KEYMAP( \ | |||
K08,K10,K18,K20,K28,K30,K38,K40,K48,K50,K57,K5F, \ | |||
K07,K0F,K17,K1F,K27,K2F,K37,K3F,K47,K4F,K56,K5E, \ | |||
\ | |||
K05,K06, K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K5D,K66, K67,K6E,K6F, K76,K77,K7E,K84, \ | |||
K04,K0C, K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B, K5C, K64,K65,K6D, K6C,K75,K7D,K7C, \ | |||
K03,K0B, K14,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K53,K5A, K63, K6B,K73,K74,K7B, \ | |||
K83,K0A, K12,K13,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K51,K59, K61,K62,K6A, K69,K72,K7A,K79, \ | |||
K01,K09, K11, K19, K29, K39, K58, K60, K68,K70,K71,K78 \ | |||
) { \ | |||
{ KC_NO, KC_##K01, KC_NO, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \ | |||
{ KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_##K0F }, \ | |||
{ KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \ | |||
{ KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E, KC_##K1F }, \ | |||
{ KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27 }, \ | |||
{ KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_##K2F }, \ | |||
{ KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37 }, \ | |||
{ KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E, KC_##K3F }, \ | |||
{ KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47 }, \ | |||
{ KC_##K48, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E, KC_##K4F }, \ | |||
{ KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \ | |||
{ KC_##K58, KC_##K59, KC_##K5A, KC_##K5B, KC_##K5C, KC_##K5D, KC_##K5E, KC_##K5F }, \ | |||
{ KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67 }, \ | |||
{ KC_##K68, KC_##K69, KC_##K6A, KC_##K6B, KC_##K6C, KC_##K6D, KC_##K6E, KC_##K6F }, \ | |||
{ KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_##K77 }, \ | |||
{ KC_##K78, KC_##K79, KC_##K7A, KC_##K7B, KC_##K7C, KC_##K7D, KC_##K7E, KC_NO }, \ | |||
{ KC_NO, KC_NO, KC_NO, KC_##K83, KC_##K84, KC_NO, KC_NO, KC_NO, }, \ | |||
} | |||
static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
/* 0: default | |||
* ,---. ,---------------. ,---------------. ,---------------. ,-----------. | |||
* |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| | |||
* `---' `---------------' `---------------' `---------------' `-----------' | |||
* ,-----------------------------------------------------------. ,-----------. ,---------------. | |||
* | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \|BS | |Ins|Hom|PgU| |NmL| /| *| -| | |||
* |-----------------------------------------------------------| |-----------| |---------------| | |||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD| | 7| 8| 9| | | |||
* |-----------------------------------------------------------| `-----------' |-----------| +| | |||
* |CapsLo| A| S| D| F| G| H| J| K| L| ;| '| #|Retu| | 4| 5| 6| | | |||
* |-----------------------------------------------------------| ,---. |---------------| | |||
* |Shif| \| Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3| | | |||
* |-----------------------------------------------------------| ,-----------. |-----------|Ent| | |||
* |Ctrl| |Alt | Space |Alt | |Ctrl| |Lef|Dow|Rig| | 0| .| | | |||
* `----' `---------------------------------------' `----' `-----------' `---------------' | |||
*/ | |||
/* | |||
KEYMAP( | |||
F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24, | |||
F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, | |||
PSCR,ESC, GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, JYEN,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, | |||
SLCK,INT4, TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, BSLS, DEL, END, PGDN, P7, P8, P9, PPLS, | |||
PAUS,INT5, CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT, NUHS,ENT, UP, P4, P5, P6, PCMM, | |||
APP, INT6, LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RO, RSFT, LEFT,INT2,RGHT, P1, P2, P3, PENT, | |||
RGUI,LGUI, LCTL, LALT, SPC, RALT, RCTL, DOWN, NO, P0, PDOT,NO | |||
), | |||
*/ | |||
/* | |||
KEYMAP( | |||
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, | |||
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, | |||
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, | |||
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, | |||
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS, | |||
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, | |||
TRNS,TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,TRNS,TRNS,TRNS | |||
), | |||
*/ | |||
// pseudo ANSI | |||
KEYMAP( | |||
FN0, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, | |||
PSCR,PAUS,PGUP,PGDN,HOME,END, INS, DEL, LEFT,DOWN,UP, RGHT, | |||
NO, NO, ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, GRV, BSPC, NO, NO, NO, NO, NO, NO, NO, | |||
NO, NO, TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, BSLS, NO, NO, NO, NO, NO, NO, NO, | |||
NO, NO, LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT, BSLS,ENT, NO, NO, NO, NO, NO, | |||
NO, NO, LSFT,FN1 ,Z, X, C, V, B, N, M, COMM,DOT, SLSH, FN1, RSFT, NO, NO, NO, NO, NO, NO, NO, | |||
NO, NO, LCTL, LALT, SPC, LGUI, APP, NO, NO, NO, NO, NO | |||
), | |||
// Momentary Function Layer | |||
KEYMAP( | |||
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, | |||
TRNS,MUTE,VOLD,VOLU,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, | |||
TRNS,TRNS, TRNS,F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, | |||
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,HOME,UP ,END, TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, | |||
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,MS_L,MS_D,MS_U,MS_R,LEFT,DOWN, RGHT,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS, | |||
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PGUP,PGDN,TRNS, TRNS,RSFT, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, | |||
TRNS,TRNS, BTN2, TRNS, BTN1, RALT, RCTL, TRNS, TRNS,TRNS,TRNS,TRNS | |||
), | |||
// Mouse Layer | |||
KEYMAP( | |||
FN0, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, | |||
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, | |||
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,NO, TRNS, NO, NO, NO, NO, NO, NO, NO, | |||
TRNS,TRNS, TRNS,NO, NO, MS_U,NO, NO, WH_L,WH_D,WH_U,WH_R,NO, NO, NO, TRNS, NO, NO, NO, NO, NO, NO, NO, | |||
TRNS,TRNS, BTN2,BTN1,MS_L,MS_D,MS_R,NO, MS_L,MS_D,MS_U,MS_R,NO, NO, NO, ENT, NO, NO, NO, NO, NO, | |||
TRNS,TRNS, TRNS,TRNS,NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, RSFT, NO, NO, NO, NO, NO, NO, NO, | |||
TRNS,TRNS, TRNS, TRNS, BTN1, BTN2, TRNS, NO, NO, NO, NO, NO | |||
), | |||
// vi Layer | |||
KEYMAP( | |||
FN0, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, | |||
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, | |||
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,NO, TRNS, NO, NO, NO, NO, NO, NO, NO, | |||
TRNS,TRNS, TRNS,HOME,PGDN,UP, PGUP,END, HOME,PGDN,PGUP,END, NO, NO, NO, TRNS, NO, NO, NO, NO, NO, NO, NO, | |||
TRNS,TRNS, TRNS,NO, LEFT,DOWN,RGHT,NO, LEFT,DOWN,UP, RGHT,NO, NO, NO, ENT, NO, NO, NO, NO, NO, | |||
TRNS,TRNS, TRNS,TRNS,NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, RSFT, NO, NO, NO, NO, NO, NO, NO, | |||
TRNS,TRNS, TRNS, TRNS, SPC, RALT, RCTL, NO, NO, NO, NO, NO | |||
), | |||
// num lock layer | |||
KEYMAP( | |||
FN0, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, | |||
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, | |||
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, | |||
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, | |||
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS, | |||
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, | |||
TRNS,TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,TRNS,TRNS,TRNS | |||
), | |||
}; | |||
static const uint16_t fn_actions[] PROGMEM = { | |||
[0] = ACTION_DEFAULT_LAYER_SET(0), | |||
[1] = ACTION_LAYER_MOMENTARY(1), | |||
[2] = ACTION_LAYER_MOMENTARY(2), //ACTION_LAYER_ON(2, ON_RELEASE), | |||
[3] = KC_NO, //ACTION_LAYER_ON(3, ON_RELEASE), | |||
[4] = KC_NO, //ACTION_LAYER_ON(4, ON_RELEASE), | |||
[5] = KC_NO, | |||
[6] = KC_NO, | |||
[7] = KC_NO, | |||
}; | |||
/* | |||
enum macro_id { | |||
MS_UL, | |||
MS_UR, | |||
MS_DL, | |||
MS_DR, | |||
}; | |||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) | |||
{ | |||
keyevent_t event = record->event; | |||
switch (id) { | |||
case MS_UL: | |||
return (event.pressed ? MACRO( D(MS_L), D(MS_U), END ) : MACRO( U(MS_L), U(MS_U), END ) ); | |||
case MS_UR: | |||
return (event.pressed ? MACRO( D(MS_R), D(MS_U), END ) : MACRO( U(MS_L), U(MS_U), END ) ); | |||
case MS_DL: | |||
return (event.pressed ? MACRO( D(MS_L), D(MS_D), END ) : MACRO( U(MS_L), U(MS_U), END ) ); | |||
case MS_DR: | |||
return (event.pressed ? MACRO( D(MS_R), D(MS_D), END ) : MACRO( U(MS_L), U(MS_U), END ) ); | |||
} | |||
return MACRO_NONE; | |||
} | |||
*/ | |||
uint8_t keymap_key_to_keycode(uint8_t layer, key_t key) | |||
{ | |||
return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]); | |||
} | |||
action_t keymap_fn_to_action(uint8_t keycode) | |||
{ | |||
action_t action; | |||
action.code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]); | |||
return action; | |||
} |
@@ -0,0 +1,35 @@ | |||
/* | |||
Converter for 70% IBM Terminal Keyboard | |||
Author: Benjamin Gould, 2013 | |||
Based on code Copyright 2011 Jun Wako <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "stdint.h" | |||
#include "ps2.h" | |||
#include "led.h" | |||
void led_set(uint8_t usb_led) | |||
{ | |||
uint8_t ps2_led = 0; | |||
if (usb_led & (1<<USB_LED_SCROLL_LOCK)) | |||
ps2_led |= (1<<PS2_LED_SCROLL_LOCK); | |||
if (usb_led & (1<<USB_LED_NUM_LOCK)) | |||
ps2_led |= (1<<PS2_LED_NUM_LOCK); | |||
if (usb_led & (1<<USB_LED_CAPS_LOCK)) | |||
ps2_led |= (1<<PS2_LED_CAPS_LOCK); | |||
ps2_host_set_led(ps2_led); | |||
} |
@@ -0,0 +1,262 @@ | |||
/* | |||
Copyright 2011 Jun Wako <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include <stdint.h> | |||
#include <stdbool.h> | |||
#include <avr/io.h> | |||
#include <util/delay.h> | |||
#include "print.h" | |||
#include "util.h" | |||
#include "debug.h" | |||
#include "ps2.h" | |||
#include "matrix.h" | |||
static void matrix_make(uint8_t code); | |||
static void matrix_break(uint8_t code); | |||
#ifdef MATRIX_HAS_GHOST | |||
static bool matrix_has_ghost_in_row(uint8_t row); | |||
#endif | |||
/* | |||
* Matrix Array usage: | |||
* 'Scan Code Set 3' is assigned into 17x8 cell matrix. | |||
* | |||
* 8bit wide | |||
* +---------+ | |||
* 0| | | |||
* :| | 0x00-0x87 | |||
* ;| | | |||
* 17| | | |||
* +---------+ | |||
*/ | |||
static uint8_t matrix[MATRIX_ROWS]; | |||
#define ROW(code) (code>>3) | |||
#define COL(code) (code&0x07) | |||
static bool is_modified = false; | |||
inline | |||
uint8_t matrix_rows(void) | |||
{ | |||
return MATRIX_ROWS; | |||
} | |||
inline | |||
uint8_t matrix_cols(void) | |||
{ | |||
return MATRIX_COLS; | |||
} | |||
void matrix_init(void) | |||
{ | |||
debug_enable = true; | |||
//debug_matrix = true; | |||
//debug_keyboard = true; | |||
//debug_mouse = false; | |||
ps2_host_init(); | |||
// initialize matrix state: all keys off | |||
for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00; | |||
return; | |||
} | |||
uint8_t matrix_scan(void) | |||
{ | |||
// scan code reading states | |||
static enum { | |||
RESET, | |||
RESET_RESPONSE, | |||
KBD_ID0, | |||
KBD_ID1, | |||
CONFIG, | |||
READY, | |||
F0, | |||
} state = RESET; | |||
is_modified = false; | |||
uint8_t code; | |||
if ((code = ps2_host_recv())) { | |||
debug("r"); debug_hex(code); debug(" "); | |||
} | |||
switch (state) { | |||
case RESET: | |||
debug("wFF "); | |||
if (ps2_host_send(0xFF) == 0xFA) { | |||
debug("[ack]\nRESET_RESPONSE: "); | |||
state = RESET_RESPONSE; | |||
} | |||
break; | |||
case RESET_RESPONSE: | |||
if (code == 0xAA) { | |||
debug("[ok]\nKBD_ID: "); | |||
state = KBD_ID0; | |||
} else if (code) { | |||
debug("err\nRESET: "); | |||
state = RESET; | |||
} | |||
break; | |||
// after reset receive keyboad ID(2 bytes) | |||
case KBD_ID0: | |||
if (code) { | |||
state = KBD_ID1; | |||
} | |||
break; | |||
case KBD_ID1: | |||
if (code) { | |||
debug("\nCONFIG: "); | |||
state = CONFIG; | |||
} | |||
break; | |||
case CONFIG: | |||
debug("wF8 "); | |||
if (ps2_host_send(0xF8) == 0xFA) { | |||
debug("[ack]\nREADY\n"); | |||
state = READY; | |||
} | |||
break; | |||
case READY: | |||
switch (code) { | |||
case 0x00: | |||
break; | |||
case 0xF0: | |||
state = F0; | |||
debug(" "); | |||
break; | |||
default: // normal key make | |||
if (code < 0x88) { | |||
matrix_make(code); | |||
} else { | |||
debug("unexpected scan code at READY: "); debug_hex(code); debug("\n"); | |||
} | |||
state = READY; | |||
debug("\n"); | |||
} | |||
break; | |||
case F0: // Break code | |||
switch (code) { | |||
case 0x00: | |||
break; | |||
default: | |||
if (code < 0x88) { | |||
matrix_break(code); | |||
} else { | |||
debug("unexpected scan code at F0: "); debug_hex(code); debug("\n"); | |||
} | |||
state = READY; | |||
debug("\n"); | |||
} | |||
break; | |||
} | |||
return 1; | |||
} | |||
bool matrix_is_modified(void) | |||
{ | |||
return is_modified; | |||
} | |||
inline | |||
bool matrix_has_ghost(void) | |||
{ | |||
#ifdef MATRIX_HAS_GHOST | |||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) { | |||
if (matrix_has_ghost_in_row(i)) | |||
return true; | |||
} | |||
#endif | |||
return false; | |||
} | |||
inline | |||
bool matrix_is_on(uint8_t row, uint8_t col) | |||
{ | |||
return (matrix[row] & (1<<col)); | |||
} | |||
inline | |||
uint8_t matrix_get_row(uint8_t row) | |||
{ | |||
return matrix[row]; | |||
} | |||
void matrix_print(void) | |||
{ | |||
print("\nr/c 01234567\n"); | |||
for (uint8_t row = 0; row < matrix_rows(); row++) { | |||
phex(row); print(": "); | |||
pbin_reverse(matrix_get_row(row)); | |||
#ifdef MATRIX_HAS_GHOST | |||
if (matrix_has_ghost_in_row(row)) { | |||
print(" <ghost"); | |||
} | |||
#endif | |||
print("\n"); | |||
} | |||
} | |||
uint8_t matrix_key_count(void) | |||
{ | |||
uint8_t count = 0; | |||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) { | |||
count += bitpop(matrix[i]); | |||
} | |||
return count; | |||
} | |||
#ifdef MATRIX_HAS_GHOST | |||
inline | |||
static bool matrix_has_ghost_in_row(uint8_t row) | |||
{ | |||
// no ghost exists in case less than 2 keys on | |||
if (((matrix[row] - 1) & matrix[row]) == 0) | |||
return false; | |||
// ghost exists in case same state as other row | |||
for (uint8_t i=0; i < MATRIX_ROWS; i++) { | |||
if (i != row && (matrix[i] & matrix[row]) == matrix[row]) | |||
return true; | |||
} | |||
return false; | |||
} | |||
#endif | |||
inline | |||
static void matrix_make(uint8_t code) | |||
{ | |||
if (!matrix_is_on(ROW(code), COL(code))) { | |||
matrix[ROW(code)] |= 1<<COL(code); | |||
is_modified = true; | |||
} | |||
} | |||
inline | |||
static void matrix_break(uint8_t code) | |||
{ | |||
if (matrix_is_on(ROW(code), COL(code))) { | |||
matrix[ROW(code)] &= ~(1<<COL(code)); | |||
is_modified = true; | |||
} | |||
} |
@@ -0,0 +1,27 @@ | |||
BLUEFRUIT_DIR = protocol/bluefruit | |||
PJRC_DIR = protocol/pjrc | |||
SRC += $(BLUEFRUIT_DIR)/main.c \ | |||
$(BLUEFRUIT_DIR)/bluefruit.c \ | |||
serial_uart.c \ | |||
$(PJRC_DIR)/pjrc.c \ | |||
$(PJRC_DIR)/usb_keyboard.c \ | |||
$(PJRC_DIR)/usb_debug.c \ | |||
$(PJRC_DIR)/usb.c | |||
# Option modules | |||
ifdef $(or MOUSEKEY_ENABLE, PS2_MOUSE_ENABLE) | |||
SRC += $(PJRC_DIR)/usb_mouse.c | |||
endif | |||
ifdef EXTRAKEY_ENABLE | |||
SRC += $(PJRC_DIR)/usb_extra.c | |||
endif | |||
# Search Path | |||
VPATH += $(TOP_DIR)/$(BLUEFRUIT_DIR) | |||
#VPATH += $(TOP_DIR)/$(BLUEFRUIT_DIR)/usb_debug_only | |||
VPATH += $(TOP_DIR)/$(PJRC_DIR) | |||
OPT_DEFS += -DPROTOCOL_BLUEFRUIT | |||
OPT_DEFS += -DPROTOCOL_PJRC |
@@ -0,0 +1,202 @@ | |||
/* | |||
Bluefruit Protocol for TMK firmware | |||
Author: Benjamin Gould, 2013 | |||
Based on code Copyright 2011 Jun Wako <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include <stdint.h> | |||
#include "host.h" | |||
#include "report.h" | |||
#include "print.h" | |||
#include "debug.h" | |||
#include "host_driver.h" | |||
#include "serial.h" | |||
#include "bluefruit.h" | |||
#define BLUEFRUIT_TRACE_SERIAL 1 | |||
static uint8_t bluefruit_keyboard_leds = 0; | |||
static void bluefruit_serial_send(uint8_t); | |||
void bluefruit_keyboard_print_report(report_keyboard_t *report) | |||
{ | |||
if (!debug_keyboard) return; | |||
dprintf("keys: "); for (int i = 0; i < REPORT_KEYS; i++) { debug_hex8(report->keys[i]); dprintf(" "); } | |||
dprintf(" mods: "); debug_hex8(report->mods); | |||
dprintf(" reserved: "); debug_hex8(report->reserved); | |||
dprintf("\n"); | |||
} | |||
#ifdef BLUEFRUIT_TRACE_SERIAL | |||
static void bluefruit_trace_header() | |||
{ | |||
dprintf("+------------------------------------+\n"); | |||
dprintf("| HID report to Bluefruit via serial |\n"); | |||
dprintf("+------------------------------------+\n|"); | |||
} | |||
static void bluefruit_trace_footer() | |||
{ | |||
dprintf("|\n+------------------------------------+\n\n"); | |||
} | |||
#endif | |||
static void bluefruit_serial_send(uint8_t data) | |||
{ | |||
#ifdef BLUEFRUIT_TRACE_SERIAL | |||
dprintf(" "); | |||
debug_hex8(data); | |||
dprintf(" "); | |||
#endif | |||
serial_send(data); | |||
} | |||
/*------------------------------------------------------------------* | |||
* Host driver | |||
*------------------------------------------------------------------*/ | |||
static uint8_t keyboard_leds(void); | |||
static void send_keyboard(report_keyboard_t *report); | |||
static void send_mouse(report_mouse_t *report); | |||
static void send_system(uint16_t data); | |||
static void send_consumer(uint16_t data); | |||
static host_driver_t driver = { | |||
keyboard_leds, | |||
send_keyboard, | |||
send_mouse, | |||
send_system, | |||
send_consumer | |||
}; | |||
host_driver_t *bluefruit_driver(void) | |||
{ | |||
return &driver; | |||
} | |||
static uint8_t keyboard_leds(void) { | |||
return bluefruit_keyboard_leds; | |||
} | |||
static void send_keyboard(report_keyboard_t *report) | |||
{ | |||
#ifdef BLUEFRUIT_TRACE_SERIAL | |||
bluefruit_trace_header(); | |||
#endif | |||
bluefruit_serial_send(0xFD); | |||
for (uint8_t i = 0; i < REPORT_SIZE; i++) { | |||
bluefruit_serial_send(report->raw[i]); | |||
} | |||
#ifdef BLUEFRUIT_TRACE_SERIAL | |||
bluefruit_trace_footer(); | |||
#endif | |||
} | |||
static void send_mouse(report_mouse_t *report) | |||
{ | |||
#ifdef BLUEFRUIT_TRACE_SERIAL | |||
bluefruit_trace_header(); | |||
#endif | |||
bluefruit_serial_send(0xFD); | |||
bluefruit_serial_send(0x00); | |||
bluefruit_serial_send(0x03); | |||
bluefruit_serial_send(report->buttons); | |||
bluefruit_serial_send(report->x); | |||
bluefruit_serial_send(report->y); | |||
bluefruit_serial_send(report->v); // should try sending the wheel v here | |||
bluefruit_serial_send(report->h); // should try sending the wheel h here | |||
bluefruit_serial_send(0x00); | |||
#ifdef BLUEFRUIT_TRACE_SERIAL | |||
bluefruit_trace_footer(); | |||
#endif | |||
} | |||
static void send_system(uint16_t data) | |||
{ | |||
} | |||
/* | |||
+-----------------+-------------------+-------+ | |||
| Consumer Key | Bit Map | Hex | | |||
+-----------------+-------------------+-------+ | |||
| Home | 00000001 00000000 | 01 00 | | |||
| KeyboardLayout | 00000010 00000000 | 02 00 | | |||
| Search | 00000100 00000000 | 04 00 | | |||
| Snapshot | 00001000 00000000 | 08 00 | | |||
| VolumeUp | 00010000 00000000 | 10 00 | | |||
| VolumeDown | 00100000 00000000 | 20 00 | | |||
| Play/Pause | 01000000 00000000 | 40 00 | | |||
| Fast Forward | 10000000 00000000 | 80 00 | | |||
| Rewind | 00000000 00000001 | 00 01 | | |||
| Scan Next Track | 00000000 00000010 | 00 02 | | |||
| Scan Prev Track | 00000000 00000100 | 00 04 | | |||
| Random Play | 00000000 00001000 | 00 08 | | |||
| Stop | 00000000 00010000 | 00 10 | | |||
+-------------------------------------+-------+ | |||
*/ | |||
#define CONSUMER2BLUEFRUIT(usage) \ | |||
(usage == AUDIO_MUTE ? 0x0000 : \ | |||
(usage == AUDIO_VOL_UP ? 0x1000 : \ | |||
(usage == AUDIO_VOL_DOWN ? 0x2000 : \ | |||
(usage == TRANSPORT_NEXT_TRACK ? 0x0002 : \ | |||
(usage == TRANSPORT_PREV_TRACK ? 0x0004 : \ | |||
(usage == TRANSPORT_STOP ? 0x0010 : \ | |||
(usage == TRANSPORT_STOP_EJECT ? 0x0000 : \ | |||
(usage == TRANSPORT_PLAY_PAUSE ? 0x4000 : \ | |||
(usage == AL_CC_CONFIG ? 0x0000 : \ | |||
(usage == AL_EMAIL ? 0x0000 : \ | |||
(usage == AL_CALCULATOR ? 0x0000 : \ | |||
(usage == AL_LOCAL_BROWSER ? 0x0000 : \ | |||
(usage == AC_SEARCH ? 0x0400 : \ | |||
(usage == AC_HOME ? 0x0100 : \ | |||
(usage == AC_BACK ? 0x0000 : \ | |||
(usage == AC_FORWARD ? 0x0000 : \ | |||
(usage == AC_STOP ? 0x0000 : \ | |||
(usage == AC_REFRESH ? 0x0000 : \ | |||
(usage == AC_BOOKMARKS ? 0x0000 : 0))))))))))))))))))) | |||
static void send_consumer(uint16_t data) | |||
{ | |||
static uint16_t last_data = 0; | |||
if (data == last_data) return; | |||
last_data = data; | |||
uint16_t bitmap = CONSUMER2BLUEFRUIT(data); | |||
#ifdef BLUEFRUIT_TRACE_SERIAL | |||
dprintf("\nData: "); | |||
debug_hex16(data); | |||
dprintf("; bitmap: "); | |||
debug_hex16(bitmap); | |||
dprintf("\n"); | |||
bluefruit_trace_header(); | |||
#endif | |||
bluefruit_serial_send(0xFD); | |||
bluefruit_serial_send(0x00); | |||
bluefruit_serial_send(0x02); | |||
bluefruit_serial_send((bitmap>>8)&0xFF); | |||
bluefruit_serial_send(bitmap&0xFF); | |||
bluefruit_serial_send(0x00); | |||
bluefruit_serial_send(0x00); | |||
bluefruit_serial_send(0x00); | |||
bluefruit_serial_send(0x00); | |||
#ifdef BLUEFRUIT_TRACE_SERIAL | |||
bluefruit_trace_footer(); | |||
#endif | |||
} | |||
@@ -0,0 +1,28 @@ | |||
/* | |||
Bluefruit Protocol for TMK firmware | |||
Author: Benjamin Gould, 2013 | |||
Based on code Copyright 2011 Jun Wako <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef VUSB_H | |||
#define VUSB_H | |||
#include "host_driver.h" | |||
host_driver_t *bluefruit_driver(void); | |||
#endif |
@@ -0,0 +1,116 @@ | |||
/* | |||
Bluefruit Protocol for TMK firmware | |||
Author: Benjamin Gould, 2013 | |||
Based on code Copyright 2011 Jun Wako <[email protected]> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include <stdint.h> | |||
#include <avr/interrupt.h> | |||
#include <avr/wdt.h> | |||
#include <avr/sleep.h> | |||
#include <util/delay.h> | |||
#include "serial.h" | |||
#include "keyboard.h" | |||
#include "usb.h" | |||
#include "host.h" | |||
#include "timer.h" | |||
#include "print.h" | |||
#include "debug.h" | |||
#include "sendchar.h" | |||
#include "suspend.h" | |||
#include "bluefruit.h" | |||
#include "pjrc.h" | |||
#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n)) | |||
#define HOST_DRIVER_NOT_SET 0 | |||
#define BLUEFRUIT_HOST_DRIVER 1 | |||
#define PJRC_HOST_DRIVER 2 | |||
int main(void) | |||
{ | |||
CPU_PRESCALE(0); | |||
DDRD = _BV(PD5); | |||
DDRB = _BV(PB0); | |||
PORTD = _BV(PD5); | |||
PORTB = _BV(PB0); | |||
print_set_sendchar(sendchar); | |||
usb_init(); | |||
_delay_ms(2000); | |||
// while (!usb_configured()) /* wait */ | |||
dprintf("Initializing keyboard...\n"); | |||
keyboard_init(); | |||
// This implementation is pretty simplistic... if the USB connection | |||
// is not configured, choose the Bluefruit, otherwise use USB | |||
// Definitely would prefer to have this driven by an input pin and make | |||
// it switch dynamically - BCG | |||
if (!usb_configured()) { | |||
// Send power to Bluefruit... Adafruit says it takes 27 mA, I think | |||
// the pins should provide 40 mA, but just in case I switch the | |||
// Bluefruit using a transistor - BCG | |||
DDRB = _BV(PB6); | |||
PORTB |= _BV(PB6); | |||
dprintf("Setting host driver to bluefruit...\n"); | |||
host_set_driver(bluefruit_driver()); | |||
dprintf("Initializing serial...\n"); | |||
serial_init(); | |||
// wait an extra second for the PC's operating system | |||
// to load drivers and do whatever it does to actually | |||
// be ready for input | |||
_delay_ms(1000); | |||
PORTD = ~_BV(PD5); | |||
dprintf("Starting main loop"); | |||
while (1) { | |||
keyboard_task(); | |||
} | |||
} else { | |||
// I'm not smart enough to get this done with LUFA - BCG | |||
dprintf("Setting host driver to PJRC...\n"); | |||
host_set_driver(pjrc_driver()); | |||
#ifdef SLEEP_LED_ENABLE | |||
sleep_led_init(); | |||
#endif | |||
// wait an extra second for the PC's operating system | |||
// to load drivers and do whatever it does to actually | |||
// be ready for input | |||
_delay_ms(1000); | |||
PORTB = ~_BV(PB0); | |||
dprintf("Starting main loop"); | |||
while (1) { | |||
while (suspend) { | |||
suspend_power_down(); | |||
if (remote_wakeup && suspend_wakeup_condition()) { | |||
usb_remote_wakeup(); | |||
} | |||
} | |||
keyboard_task(); | |||
} | |||
} | |||
} |