Add support for Adafruit's Bluefruitkeymap_in_eeprom
# Target file name (without extension). | |||||
TARGET = terminal_bluefruit | |||||
# Directory common source filess exist | |||||
TOP_DIR = ../.. | |||||
# Directory keyboard dependent files exist | |||||
TARGET_DIR = . | |||||
# keyboard dependent files | |||||
SRC = keymap.c \ | |||||
matrix.c \ | |||||
led.c | |||||
CONFIG_H = config.h | |||||
BLUEFRUIT_TRACE_SERIAL=true | |||||
# MCU name, you MUST set this to match the board you are using | |||||
# type "make clean" after changing this, so all files will be rebuilt | |||||
#MCU = at90usb162 # Teensy 1.0 | |||||
MCU = atmega32u4 # Teensy 2.0 | |||||
#MCU = at90usb646 # Teensy++ 1.0 | |||||
#MCU = at90usb1286 # Teensy++ 2.0 | |||||
# Processor frequency. | |||||
# Normally the first thing your program should do is set the clock prescaler, | |||||
# so your program will run at the correct speed. You should also set this | |||||
# variable to same clock speed. The _delay_ms() macro uses this, and many | |||||
# examples use this variable to calculate timings. Do not add a "UL" here. | |||||
F_CPU = 16000000 | |||||
# | |||||
# LUFA specific | |||||
# | |||||
# Target architecture (see library "Board Types" documentation). | |||||
ARCH = AVR8 | |||||
# Input clock frequency. | |||||
# This will define a symbol, F_USB, in all source code files equal to the | |||||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||||
# at the end, this will be done automatically to create a 32-bit value in your | |||||
# source code. | |||||
# | |||||
# If no clock division is performed on the input clock inside the AVR (via the | |||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||||
F_USB = $(F_CPU) | |||||
# Interrupt driven control endpoint task | |||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||||
# Boot Section Size in bytes | |||||
# Teensy halfKay 512 | |||||
# Atmel DFU loader 4096 | |||||
# LUFA bootloader 4096 | |||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||||
# Build Options | |||||
# comment out to disable the options. | |||||
# | |||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) | |||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||||
CONSOLE_ENABLE = yes # Console for debug(+400) | |||||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||||
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend | |||||
#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA | |||||
# | |||||
# PS/2 protocol implementations | |||||
# USART is recommended if it is available, others are for reference purpose. | |||||
# INT implementation will drop simultaneous key strokes. | |||||
# | |||||
#PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomened) | |||||
PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin | |||||
#PS2_USE_BUSYWAIT = yes # uses primitive reference code | |||||
ifdef PS2_USE_USART | |||||
SRC += protocol/ps2_usart.c | |||||
OPT_DEFS += -DPS2_USE_USART | |||||
endif | |||||
ifdef PS2_USE_INT | |||||
SRC += protocol/ps2.c | |||||
OPT_DEFS += -DPS2_USE_INT | |||||
endif | |||||
ifdef PS2_USE_BUSYWAIT | |||||
SRC += protocol/ps2.c | |||||
OPT_DEFS += -DPS2_USE_BUSYWAIT | |||||
endif | |||||
#---------------- Programming Options -------------------------- | |||||
PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex | |||||
# Search Path | |||||
VPATH += $(TARGET_DIR) | |||||
VPATH += $(TOP_DIR) | |||||
include $(TOP_DIR)/protocol/bluefruit.mk | |||||
include $(TOP_DIR)/protocol.mk | |||||
include $(TOP_DIR)/common.mk | |||||
include $(TOP_DIR)/rules.mk |
Keyboard converter for IBM terminal keyboard | |||||
============================================ | |||||
It supports PS/2 Scan Code Set 3 and runs on USB AVR chips such like PJRC Teensy. | |||||
I tested the converter on ATMega32U4 with 1392595(102keys) and 6110345(122keys). | |||||
Source code: https://github.com/tmk/tmk_keyboard | |||||
Article: http://geekhack.org/index.php?topic=27272.0 | |||||
CONNECTION | |||||
---------- | |||||
Keyboard ATMega32U4 | |||||
---------------------- | |||||
Data: PD2 | |||||
Clock: PD5 | |||||
And VCC and GND, of course. See RESOURCE for keyboard connector pin assign. | |||||
BUILD | |||||
----- | |||||
$ git clone https://github.com/tmk/tmk_keyboard.git | |||||
$ cd converter/terminal_usb | |||||
$ make | |||||
RESOURCE | |||||
-------- | |||||
Soarer's Converter: http://geekhack.org/index.php?topic=17458.0 | |||||
102keys(1392595): http://geekhack.org/index.php?topic=10737.0 | |||||
122keys(1390876): http://www.seasip.info/VintagePC/ibm_1390876.html | |||||
KbdBabel: http://www.kbdbabel.org/ | |||||
RJ45 Connector: http://www.kbdbabel.org/conn/kbd_connector_ibmterm.png | |||||
DIN Connector: http://www.kbdbabel.org/conn/kbd_connector_ibm3179_318x_319x.png | |||||
WinAVR: http://winavr.sourceforge.net/ | |||||
EOF |
/* | |||||
Converter for 70% IBM Terminal Keyboard | |||||
Author: Benjamin Gould, 2013 | |||||
Based on code Copyright 2011 Jun Wako <[email protected]> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#ifndef CONFIG_H | |||||
#define CONFIG_H | |||||
#define VENDOR_ID 0xFEED | |||||
#define PRODUCT_ID 0x6535 | |||||
#define DEVICE_VER 0x0100 | |||||
#define MANUFACTURER t.m.k. | |||||
#define PRODUCT 70% IBM Terminal Keyboard Converter w/ Bluetooth | |||||
#define DESCRIPTION USB converter for IBM Terminal Keyboard w/ Bluetooth | |||||
/* matrix size */ | |||||
#define MATRIX_ROWS 17 // keycode bit: 3-0 | |||||
#define MATRIX_COLS 8 // keycode bit: 6-4 | |||||
/* legacy keymap support */ | |||||
// #define USE_LEGACY_KEYMAP | |||||
/* key combination for command */ | |||||
#define IS_COMMAND() ( \ | |||||
(keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) || \ | |||||
(keyboard_report->mods == (MOD_BIT(KC_RALT) | MOD_BIT(KC_RCTL))) \ | |||||
) | |||||
/* USART configuration | |||||
* asynchronous, 9600baud, 8-data bit, non parity, 1-stop bit, no flow control | |||||
*/ | |||||
#ifdef __AVR_ATmega32U4__ | |||||
#define SERIAL_UART_BAUD 9600 | |||||
#define SERIAL_UART_DATA UDR1 | |||||
#define SERIAL_UART_UBRR ((F_CPU/(16UL*SERIAL_UART_BAUD))-1) | |||||
#define SERIAL_UART_RXD_VECT USART1_RX_vect | |||||
#define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1)) | |||||
#define SERIAL_UART_INIT() do { \ | |||||
UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \ | |||||
UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8); /* baud rate */ \ | |||||
UCSR1B = (1<<TXEN1); /* TX: enable */ \ | |||||
UCSR1C = (0<<UPM11) | (0<<UPM10) | /* parity: none(00), even(01), odd(11) */ \ | |||||
(0<<UCSZ12) | (1<<UCSZ11) | (1<<UCSZ10); /* data-8bit(011) */ \ | |||||
sei(); \ | |||||
} while(0) | |||||
#else | |||||
# error "USART configuration is needed." | |||||
#endif | |||||
/* | |||||
* PS/2 Interrupt configuration | |||||
*/ | |||||
#ifdef PS2_USE_INT | |||||
/* uses INT1 for clock line(ATMega32U4) */ | |||||
#define PS2_CLOCK_PORT PORTD | |||||
#define PS2_CLOCK_PIN PIND | |||||
#define PS2_CLOCK_DDR DDRD | |||||
#define PS2_CLOCK_BIT 1 | |||||
#define PS2_DATA_PORT PORTD | |||||
#define PS2_DATA_PIN PIND | |||||
#define PS2_DATA_DDR DDRD | |||||
#define PS2_DATA_BIT 0 | |||||
#define PS2_INT_INIT() do { \ | |||||
EICRA |= ((1<<ISC11) | \ | |||||
(0<<ISC10)); \ | |||||
} while (0) | |||||
#define PS2_INT_ON() do { \ | |||||
EIMSK |= (1<<INT1); \ | |||||
} while (0) | |||||
#define PS2_INT_OFF() do { \ | |||||
EIMSK &= ~(1<<INT1); \ | |||||
} while (0) | |||||
#define PS2_INT_VECT INT1_vect | |||||
#endif | |||||
/* | |||||
* PS/2 Busywait configuration | |||||
*/ | |||||
#ifdef PS2_USE_BUSYWAIT | |||||
#define PS2_CLOCK_PORT PORTD | |||||
#define PS2_CLOCK_PIN PIND | |||||
#define PS2_CLOCK_DDR DDRD | |||||
#define PS2_CLOCK_BIT 1 | |||||
#define PS2_DATA_PORT PORTD | |||||
#define PS2_DATA_PIN PIND | |||||
#define PS2_DATA_DDR DDRD | |||||
#define PS2_DATA_BIT 0 | |||||
#endif | |||||
#endif |
/* | |||||
Converter for 70% IBM Terminal Keyboard | |||||
Author: Benjamin Gould, 2013 | |||||
Based on code Copyright 2011 Jun Wako <[email protected]> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include <stdint.h> | |||||
#include <stdbool.h> | |||||
#include <avr/pgmspace.h> | |||||
#include "keycode.h" | |||||
#include "print.h" | |||||
#include "debug.h" | |||||
#include "util.h" | |||||
#include "keymap.h" | |||||
/* | |||||
* IBM Terminal keyboard 6110345(122keys)/1392595(102keys) | |||||
* http://geekhack.org/showthread.php?10737-What-Can-I-Do-With-a-Terminal-Model-M | |||||
* http://www.seasip.info/VintagePC/ibm_1391406.html | |||||
* | |||||
* Keymap array: | |||||
* 8 bytes | |||||
* +---------+ | |||||
* 0| | | |||||
* :| | 0x00-0x87 | |||||
* ;| | | |||||
* 17| | | |||||
* +---------+ | |||||
*/ | |||||
#define KEYMAP( \ | |||||
K08,K10,K18,K20,K28,K30,K38,K40,K48,K50,K57,K5F, \ | |||||
K07,K0F,K17,K1F,K27,K2F,K37,K3F,K47,K4F,K56,K5E, \ | |||||
\ | |||||
K05,K06, K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K5D,K66, K67,K6E,K6F, K76,K77,K7E,K84, \ | |||||
K04,K0C, K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B, K5C, K64,K65,K6D, K6C,K75,K7D,K7C, \ | |||||
K03,K0B, K14,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K53,K5A, K63, K6B,K73,K74,K7B, \ | |||||
K83,K0A, K12,K13,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K51,K59, K61,K62,K6A, K69,K72,K7A,K79, \ | |||||
K01,K09, K11, K19, K29, K39, K58, K60, K68,K70,K71,K78 \ | |||||
) { \ | |||||
{ KC_NO, KC_##K01, KC_NO, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \ | |||||
{ KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_##K0F }, \ | |||||
{ KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \ | |||||
{ KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E, KC_##K1F }, \ | |||||
{ KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27 }, \ | |||||
{ KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_##K2F }, \ | |||||
{ KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37 }, \ | |||||
{ KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E, KC_##K3F }, \ | |||||
{ KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47 }, \ | |||||
{ KC_##K48, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E, KC_##K4F }, \ | |||||
{ KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \ | |||||
{ KC_##K58, KC_##K59, KC_##K5A, KC_##K5B, KC_##K5C, KC_##K5D, KC_##K5E, KC_##K5F }, \ | |||||
{ KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67 }, \ | |||||
{ KC_##K68, KC_##K69, KC_##K6A, KC_##K6B, KC_##K6C, KC_##K6D, KC_##K6E, KC_##K6F }, \ | |||||
{ KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_##K77 }, \ | |||||
{ KC_##K78, KC_##K79, KC_##K7A, KC_##K7B, KC_##K7C, KC_##K7D, KC_##K7E, KC_NO }, \ | |||||
{ KC_NO, KC_NO, KC_NO, KC_##K83, KC_##K84, KC_NO, KC_NO, KC_NO, }, \ | |||||
} | |||||
static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
/* 0: default | |||||
* ,---. ,---------------. ,---------------. ,---------------. ,-----------. | |||||
* |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| | |||||
* `---' `---------------' `---------------' `---------------' `-----------' | |||||
* ,-----------------------------------------------------------. ,-----------. ,---------------. | |||||
* | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \|BS | |Ins|Hom|PgU| |NmL| /| *| -| | |||||
* |-----------------------------------------------------------| |-----------| |---------------| | |||||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD| | 7| 8| 9| | | |||||
* |-----------------------------------------------------------| `-----------' |-----------| +| | |||||
* |CapsLo| A| S| D| F| G| H| J| K| L| ;| '| #|Retu| | 4| 5| 6| | | |||||
* |-----------------------------------------------------------| ,---. |---------------| | |||||
* |Shif| \| Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3| | | |||||
* |-----------------------------------------------------------| ,-----------. |-----------|Ent| | |||||
* |Ctrl| |Alt | Space |Alt | |Ctrl| |Lef|Dow|Rig| | 0| .| | | |||||
* `----' `---------------------------------------' `----' `-----------' `---------------' | |||||
*/ | |||||
/* | |||||
KEYMAP( | |||||
F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24, | |||||
F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, | |||||
PSCR,ESC, GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, JYEN,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, | |||||
SLCK,INT4, TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, BSLS, DEL, END, PGDN, P7, P8, P9, PPLS, | |||||
PAUS,INT5, CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT, NUHS,ENT, UP, P4, P5, P6, PCMM, | |||||
APP, INT6, LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RO, RSFT, LEFT,INT2,RGHT, P1, P2, P3, PENT, | |||||
RGUI,LGUI, LCTL, LALT, SPC, RALT, RCTL, DOWN, NO, P0, PDOT,NO | |||||
), | |||||
*/ | |||||
/* | |||||
KEYMAP( | |||||
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, | |||||
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, | |||||
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, | |||||
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, | |||||
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS, | |||||
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, | |||||
TRNS,TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,TRNS,TRNS,TRNS | |||||
), | |||||
*/ | |||||
// pseudo ANSI | |||||
KEYMAP( | |||||
FN0, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, | |||||
PSCR,PAUS,PGUP,PGDN,HOME,END, INS, DEL, LEFT,DOWN,UP, RGHT, | |||||
NO, NO, ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, GRV, BSPC, NO, NO, NO, NO, NO, NO, NO, | |||||
NO, NO, TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, BSLS, NO, NO, NO, NO, NO, NO, NO, | |||||
NO, NO, LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT, BSLS,ENT, NO, NO, NO, NO, NO, | |||||
NO, NO, LSFT,FN1 ,Z, X, C, V, B, N, M, COMM,DOT, SLSH, FN1, RSFT, NO, NO, NO, NO, NO, NO, NO, | |||||
NO, NO, LCTL, LALT, SPC, LGUI, APP, NO, NO, NO, NO, NO | |||||
), | |||||
// Momentary Function Layer | |||||
KEYMAP( | |||||
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, | |||||
TRNS,MUTE,VOLD,VOLU,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, | |||||
TRNS,TRNS, TRNS,F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, | |||||
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,HOME,UP ,END, TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, | |||||
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,MS_L,MS_D,MS_U,MS_R,LEFT,DOWN, RGHT,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS, | |||||
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PGUP,PGDN,TRNS, TRNS,RSFT, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, | |||||
TRNS,TRNS, BTN2, TRNS, BTN1, RALT, RCTL, TRNS, TRNS,TRNS,TRNS,TRNS | |||||
), | |||||
// Mouse Layer | |||||
KEYMAP( | |||||
FN0, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, | |||||
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, | |||||
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,NO, TRNS, NO, NO, NO, NO, NO, NO, NO, | |||||
TRNS,TRNS, TRNS,NO, NO, MS_U,NO, NO, WH_L,WH_D,WH_U,WH_R,NO, NO, NO, TRNS, NO, NO, NO, NO, NO, NO, NO, | |||||
TRNS,TRNS, BTN2,BTN1,MS_L,MS_D,MS_R,NO, MS_L,MS_D,MS_U,MS_R,NO, NO, NO, ENT, NO, NO, NO, NO, NO, | |||||
TRNS,TRNS, TRNS,TRNS,NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, RSFT, NO, NO, NO, NO, NO, NO, NO, | |||||
TRNS,TRNS, TRNS, TRNS, BTN1, BTN2, TRNS, NO, NO, NO, NO, NO | |||||
), | |||||
// vi Layer | |||||
KEYMAP( | |||||
FN0, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, | |||||
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, | |||||
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,NO, TRNS, NO, NO, NO, NO, NO, NO, NO, | |||||
TRNS,TRNS, TRNS,HOME,PGDN,UP, PGUP,END, HOME,PGDN,PGUP,END, NO, NO, NO, TRNS, NO, NO, NO, NO, NO, NO, NO, | |||||
TRNS,TRNS, TRNS,NO, LEFT,DOWN,RGHT,NO, LEFT,DOWN,UP, RGHT,NO, NO, NO, ENT, NO, NO, NO, NO, NO, | |||||
TRNS,TRNS, TRNS,TRNS,NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, RSFT, NO, NO, NO, NO, NO, NO, NO, | |||||
TRNS,TRNS, TRNS, TRNS, SPC, RALT, RCTL, NO, NO, NO, NO, NO | |||||
), | |||||
// num lock layer | |||||
KEYMAP( | |||||
FN0, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, | |||||
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, | |||||
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, | |||||
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, | |||||
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS, | |||||
TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, | |||||
TRNS,TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,TRNS,TRNS,TRNS | |||||
), | |||||
}; | |||||
static const uint16_t fn_actions[] PROGMEM = { | |||||
[0] = ACTION_DEFAULT_LAYER_SET(0), | |||||
[1] = ACTION_LAYER_MOMENTARY(1), | |||||
[2] = ACTION_LAYER_MOMENTARY(2), //ACTION_LAYER_ON(2, ON_RELEASE), | |||||
[3] = KC_NO, //ACTION_LAYER_ON(3, ON_RELEASE), | |||||
[4] = KC_NO, //ACTION_LAYER_ON(4, ON_RELEASE), | |||||
[5] = KC_NO, | |||||
[6] = KC_NO, | |||||
[7] = KC_NO, | |||||
}; | |||||
/* | |||||
enum macro_id { | |||||
MS_UL, | |||||
MS_UR, | |||||
MS_DL, | |||||
MS_DR, | |||||
}; | |||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) | |||||
{ | |||||
keyevent_t event = record->event; | |||||
switch (id) { | |||||
case MS_UL: | |||||
return (event.pressed ? MACRO( D(MS_L), D(MS_U), END ) : MACRO( U(MS_L), U(MS_U), END ) ); | |||||
case MS_UR: | |||||
return (event.pressed ? MACRO( D(MS_R), D(MS_U), END ) : MACRO( U(MS_L), U(MS_U), END ) ); | |||||
case MS_DL: | |||||
return (event.pressed ? MACRO( D(MS_L), D(MS_D), END ) : MACRO( U(MS_L), U(MS_U), END ) ); | |||||
case MS_DR: | |||||
return (event.pressed ? MACRO( D(MS_R), D(MS_D), END ) : MACRO( U(MS_L), U(MS_U), END ) ); | |||||
} | |||||
return MACRO_NONE; | |||||
} | |||||
*/ | |||||
uint8_t keymap_key_to_keycode(uint8_t layer, key_t key) | |||||
{ | |||||
return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]); | |||||
} | |||||
action_t keymap_fn_to_action(uint8_t keycode) | |||||
{ | |||||
action_t action; | |||||
action.code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]); | |||||
return action; | |||||
} |
/* | |||||
Converter for 70% IBM Terminal Keyboard | |||||
Author: Benjamin Gould, 2013 | |||||
Based on code Copyright 2011 Jun Wako <[email protected]> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include "stdint.h" | |||||
#include "ps2.h" | |||||
#include "led.h" | |||||
void led_set(uint8_t usb_led) | |||||
{ | |||||
uint8_t ps2_led = 0; | |||||
if (usb_led & (1<<USB_LED_SCROLL_LOCK)) | |||||
ps2_led |= (1<<PS2_LED_SCROLL_LOCK); | |||||
if (usb_led & (1<<USB_LED_NUM_LOCK)) | |||||
ps2_led |= (1<<PS2_LED_NUM_LOCK); | |||||
if (usb_led & (1<<USB_LED_CAPS_LOCK)) | |||||
ps2_led |= (1<<PS2_LED_CAPS_LOCK); | |||||
ps2_host_set_led(ps2_led); | |||||
} |
/* | |||||
Copyright 2011 Jun Wako <[email protected]> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include <stdint.h> | |||||
#include <stdbool.h> | |||||
#include <avr/io.h> | |||||
#include <util/delay.h> | |||||
#include "print.h" | |||||
#include "util.h" | |||||
#include "debug.h" | |||||
#include "ps2.h" | |||||
#include "matrix.h" | |||||
static void matrix_make(uint8_t code); | |||||
static void matrix_break(uint8_t code); | |||||
#ifdef MATRIX_HAS_GHOST | |||||
static bool matrix_has_ghost_in_row(uint8_t row); | |||||
#endif | |||||
/* | |||||
* Matrix Array usage: | |||||
* 'Scan Code Set 3' is assigned into 17x8 cell matrix. | |||||
* | |||||
* 8bit wide | |||||
* +---------+ | |||||
* 0| | | |||||
* :| | 0x00-0x87 | |||||
* ;| | | |||||
* 17| | | |||||
* +---------+ | |||||
*/ | |||||
static uint8_t matrix[MATRIX_ROWS]; | |||||
#define ROW(code) (code>>3) | |||||
#define COL(code) (code&0x07) | |||||
static bool is_modified = false; | |||||
inline | |||||
uint8_t matrix_rows(void) | |||||
{ | |||||
return MATRIX_ROWS; | |||||
} | |||||
inline | |||||
uint8_t matrix_cols(void) | |||||
{ | |||||
return MATRIX_COLS; | |||||
} | |||||
void matrix_init(void) | |||||
{ | |||||
debug_enable = true; | |||||
//debug_matrix = true; | |||||
//debug_keyboard = true; | |||||
//debug_mouse = false; | |||||
ps2_host_init(); | |||||
// initialize matrix state: all keys off | |||||
for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00; | |||||
return; | |||||
} | |||||
uint8_t matrix_scan(void) | |||||
{ | |||||
// scan code reading states | |||||
static enum { | |||||
RESET, | |||||
RESET_RESPONSE, | |||||
KBD_ID0, | |||||
KBD_ID1, | |||||
CONFIG, | |||||
READY, | |||||
F0, | |||||
} state = RESET; | |||||
is_modified = false; | |||||
uint8_t code; | |||||
if ((code = ps2_host_recv())) { | |||||
debug("r"); debug_hex(code); debug(" "); | |||||
} | |||||
switch (state) { | |||||
case RESET: | |||||
debug("wFF "); | |||||
if (ps2_host_send(0xFF) == 0xFA) { | |||||
debug("[ack]\nRESET_RESPONSE: "); | |||||
state = RESET_RESPONSE; | |||||
} | |||||
break; | |||||
case RESET_RESPONSE: | |||||
if (code == 0xAA) { | |||||
debug("[ok]\nKBD_ID: "); | |||||
state = KBD_ID0; | |||||
} else if (code) { | |||||
debug("err\nRESET: "); | |||||
state = RESET; | |||||
} | |||||
break; | |||||
// after reset receive keyboad ID(2 bytes) | |||||
case KBD_ID0: | |||||
if (code) { | |||||
state = KBD_ID1; | |||||
} | |||||
break; | |||||
case KBD_ID1: | |||||
if (code) { | |||||
debug("\nCONFIG: "); | |||||
state = CONFIG; | |||||
} | |||||
break; | |||||
case CONFIG: | |||||
debug("wF8 "); | |||||
if (ps2_host_send(0xF8) == 0xFA) { | |||||
debug("[ack]\nREADY\n"); | |||||
state = READY; | |||||
} | |||||
break; | |||||
case READY: | |||||
switch (code) { | |||||
case 0x00: | |||||
break; | |||||
case 0xF0: | |||||
state = F0; | |||||
debug(" "); | |||||
break; | |||||
default: // normal key make | |||||
if (code < 0x88) { | |||||
matrix_make(code); | |||||
} else { | |||||
debug("unexpected scan code at READY: "); debug_hex(code); debug("\n"); | |||||
} | |||||
state = READY; | |||||
debug("\n"); | |||||
} | |||||
break; | |||||
case F0: // Break code | |||||
switch (code) { | |||||
case 0x00: | |||||
break; | |||||
default: | |||||
if (code < 0x88) { | |||||
matrix_break(code); | |||||
} else { | |||||
debug("unexpected scan code at F0: "); debug_hex(code); debug("\n"); | |||||
} | |||||
state = READY; | |||||
debug("\n"); | |||||
} | |||||
break; | |||||
} | |||||
return 1; | |||||
} | |||||
bool matrix_is_modified(void) | |||||
{ | |||||
return is_modified; | |||||
} | |||||
inline | |||||
bool matrix_has_ghost(void) | |||||
{ | |||||
#ifdef MATRIX_HAS_GHOST | |||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) { | |||||
if (matrix_has_ghost_in_row(i)) | |||||
return true; | |||||
} | |||||
#endif | |||||
return false; | |||||
} | |||||
inline | |||||
bool matrix_is_on(uint8_t row, uint8_t col) | |||||
{ | |||||
return (matrix[row] & (1<<col)); | |||||
} | |||||
inline | |||||
uint8_t matrix_get_row(uint8_t row) | |||||
{ | |||||
return matrix[row]; | |||||
} | |||||
void matrix_print(void) | |||||
{ | |||||
print("\nr/c 01234567\n"); | |||||
for (uint8_t row = 0; row < matrix_rows(); row++) { | |||||
phex(row); print(": "); | |||||
pbin_reverse(matrix_get_row(row)); | |||||
#ifdef MATRIX_HAS_GHOST | |||||
if (matrix_has_ghost_in_row(row)) { | |||||
print(" <ghost"); | |||||
} | |||||
#endif | |||||
print("\n"); | |||||
} | |||||
} | |||||
uint8_t matrix_key_count(void) | |||||
{ | |||||
uint8_t count = 0; | |||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) { | |||||
count += bitpop(matrix[i]); | |||||
} | |||||
return count; | |||||
} | |||||
#ifdef MATRIX_HAS_GHOST | |||||
inline | |||||
static bool matrix_has_ghost_in_row(uint8_t row) | |||||
{ | |||||
// no ghost exists in case less than 2 keys on | |||||
if (((matrix[row] - 1) & matrix[row]) == 0) | |||||
return false; | |||||
// ghost exists in case same state as other row | |||||
for (uint8_t i=0; i < MATRIX_ROWS; i++) { | |||||
if (i != row && (matrix[i] & matrix[row]) == matrix[row]) | |||||
return true; | |||||
} | |||||
return false; | |||||
} | |||||
#endif | |||||
inline | |||||
static void matrix_make(uint8_t code) | |||||
{ | |||||
if (!matrix_is_on(ROW(code), COL(code))) { | |||||
matrix[ROW(code)] |= 1<<COL(code); | |||||
is_modified = true; | |||||
} | |||||
} | |||||
inline | |||||
static void matrix_break(uint8_t code) | |||||
{ | |||||
if (matrix_is_on(ROW(code), COL(code))) { | |||||
matrix[ROW(code)] &= ~(1<<COL(code)); | |||||
is_modified = true; | |||||
} | |||||
} |
BLUEFRUIT_DIR = protocol/bluefruit | |||||
PJRC_DIR = protocol/pjrc | |||||
SRC += $(BLUEFRUIT_DIR)/main.c \ | |||||
$(BLUEFRUIT_DIR)/bluefruit.c \ | |||||
serial_uart.c \ | |||||
$(PJRC_DIR)/pjrc.c \ | |||||
$(PJRC_DIR)/usb_keyboard.c \ | |||||
$(PJRC_DIR)/usb_debug.c \ | |||||
$(PJRC_DIR)/usb.c | |||||
# Option modules | |||||
ifdef $(or MOUSEKEY_ENABLE, PS2_MOUSE_ENABLE) | |||||
SRC += $(PJRC_DIR)/usb_mouse.c | |||||
endif | |||||
ifdef EXTRAKEY_ENABLE | |||||
SRC += $(PJRC_DIR)/usb_extra.c | |||||
endif | |||||
# Search Path | |||||
VPATH += $(TOP_DIR)/$(BLUEFRUIT_DIR) | |||||
#VPATH += $(TOP_DIR)/$(BLUEFRUIT_DIR)/usb_debug_only | |||||
VPATH += $(TOP_DIR)/$(PJRC_DIR) | |||||
OPT_DEFS += -DPROTOCOL_BLUEFRUIT | |||||
OPT_DEFS += -DPROTOCOL_PJRC |
/* | |||||
Bluefruit Protocol for TMK firmware | |||||
Author: Benjamin Gould, 2013 | |||||
Based on code Copyright 2011 Jun Wako <[email protected]> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include <stdint.h> | |||||
#include "host.h" | |||||
#include "report.h" | |||||
#include "print.h" | |||||
#include "debug.h" | |||||
#include "host_driver.h" | |||||
#include "serial.h" | |||||
#include "bluefruit.h" | |||||
#define BLUEFRUIT_TRACE_SERIAL 1 | |||||
static uint8_t bluefruit_keyboard_leds = 0; | |||||
static void bluefruit_serial_send(uint8_t); | |||||
void bluefruit_keyboard_print_report(report_keyboard_t *report) | |||||
{ | |||||
if (!debug_keyboard) return; | |||||
dprintf("keys: "); for (int i = 0; i < REPORT_KEYS; i++) { debug_hex8(report->keys[i]); dprintf(" "); } | |||||
dprintf(" mods: "); debug_hex8(report->mods); | |||||
dprintf(" reserved: "); debug_hex8(report->reserved); | |||||
dprintf("\n"); | |||||
} | |||||
#ifdef BLUEFRUIT_TRACE_SERIAL | |||||
static void bluefruit_trace_header() | |||||
{ | |||||
dprintf("+------------------------------------+\n"); | |||||
dprintf("| HID report to Bluefruit via serial |\n"); | |||||
dprintf("+------------------------------------+\n|"); | |||||
} | |||||
static void bluefruit_trace_footer() | |||||
{ | |||||
dprintf("|\n+------------------------------------+\n\n"); | |||||
} | |||||
#endif | |||||
static void bluefruit_serial_send(uint8_t data) | |||||
{ | |||||
#ifdef BLUEFRUIT_TRACE_SERIAL | |||||
dprintf(" "); | |||||
debug_hex8(data); | |||||
dprintf(" "); | |||||
#endif | |||||
serial_send(data); | |||||
} | |||||
/*------------------------------------------------------------------* | |||||
* Host driver | |||||
*------------------------------------------------------------------*/ | |||||
static uint8_t keyboard_leds(void); | |||||
static void send_keyboard(report_keyboard_t *report); | |||||
static void send_mouse(report_mouse_t *report); | |||||
static void send_system(uint16_t data); | |||||
static void send_consumer(uint16_t data); | |||||
static host_driver_t driver = { | |||||
keyboard_leds, | |||||
send_keyboard, | |||||
send_mouse, | |||||
send_system, | |||||
send_consumer | |||||
}; | |||||
host_driver_t *bluefruit_driver(void) | |||||
{ | |||||
return &driver; | |||||
} | |||||
static uint8_t keyboard_leds(void) { | |||||
return bluefruit_keyboard_leds; | |||||
} | |||||
static void send_keyboard(report_keyboard_t *report) | |||||
{ | |||||
#ifdef BLUEFRUIT_TRACE_SERIAL | |||||
bluefruit_trace_header(); | |||||
#endif | |||||
bluefruit_serial_send(0xFD); | |||||
for (uint8_t i = 0; i < REPORT_SIZE; i++) { | |||||
bluefruit_serial_send(report->raw[i]); | |||||
} | |||||
#ifdef BLUEFRUIT_TRACE_SERIAL | |||||
bluefruit_trace_footer(); | |||||
#endif | |||||
} | |||||
static void send_mouse(report_mouse_t *report) | |||||
{ | |||||
#ifdef BLUEFRUIT_TRACE_SERIAL | |||||
bluefruit_trace_header(); | |||||
#endif | |||||
bluefruit_serial_send(0xFD); | |||||
bluefruit_serial_send(0x00); | |||||
bluefruit_serial_send(0x03); | |||||
bluefruit_serial_send(report->buttons); | |||||
bluefruit_serial_send(report->x); | |||||
bluefruit_serial_send(report->y); | |||||
bluefruit_serial_send(report->v); // should try sending the wheel v here | |||||
bluefruit_serial_send(report->h); // should try sending the wheel h here | |||||
bluefruit_serial_send(0x00); | |||||
#ifdef BLUEFRUIT_TRACE_SERIAL | |||||
bluefruit_trace_footer(); | |||||
#endif | |||||
} | |||||
static void send_system(uint16_t data) | |||||
{ | |||||
} | |||||
/* | |||||
+-----------------+-------------------+-------+ | |||||
| Consumer Key | Bit Map | Hex | | |||||
+-----------------+-------------------+-------+ | |||||
| Home | 00000001 00000000 | 01 00 | | |||||
| KeyboardLayout | 00000010 00000000 | 02 00 | | |||||
| Search | 00000100 00000000 | 04 00 | | |||||
| Snapshot | 00001000 00000000 | 08 00 | | |||||
| VolumeUp | 00010000 00000000 | 10 00 | | |||||
| VolumeDown | 00100000 00000000 | 20 00 | | |||||
| Play/Pause | 01000000 00000000 | 40 00 | | |||||
| Fast Forward | 10000000 00000000 | 80 00 | | |||||
| Rewind | 00000000 00000001 | 00 01 | | |||||
| Scan Next Track | 00000000 00000010 | 00 02 | | |||||
| Scan Prev Track | 00000000 00000100 | 00 04 | | |||||
| Random Play | 00000000 00001000 | 00 08 | | |||||
| Stop | 00000000 00010000 | 00 10 | | |||||
+-------------------------------------+-------+ | |||||
*/ | |||||
#define CONSUMER2BLUEFRUIT(usage) \ | |||||
(usage == AUDIO_MUTE ? 0x0000 : \ | |||||
(usage == AUDIO_VOL_UP ? 0x1000 : \ | |||||
(usage == AUDIO_VOL_DOWN ? 0x2000 : \ | |||||
(usage == TRANSPORT_NEXT_TRACK ? 0x0002 : \ | |||||
(usage == TRANSPORT_PREV_TRACK ? 0x0004 : \ | |||||
(usage == TRANSPORT_STOP ? 0x0010 : \ | |||||
(usage == TRANSPORT_STOP_EJECT ? 0x0000 : \ | |||||
(usage == TRANSPORT_PLAY_PAUSE ? 0x4000 : \ | |||||
(usage == AL_CC_CONFIG ? 0x0000 : \ | |||||
(usage == AL_EMAIL ? 0x0000 : \ | |||||
(usage == AL_CALCULATOR ? 0x0000 : \ | |||||
(usage == AL_LOCAL_BROWSER ? 0x0000 : \ | |||||
(usage == AC_SEARCH ? 0x0400 : \ | |||||
(usage == AC_HOME ? 0x0100 : \ | |||||
(usage == AC_BACK ? 0x0000 : \ | |||||
(usage == AC_FORWARD ? 0x0000 : \ | |||||
(usage == AC_STOP ? 0x0000 : \ | |||||
(usage == AC_REFRESH ? 0x0000 : \ | |||||
(usage == AC_BOOKMARKS ? 0x0000 : 0))))))))))))))))))) | |||||
static void send_consumer(uint16_t data) | |||||
{ | |||||
static uint16_t last_data = 0; | |||||
if (data == last_data) return; | |||||
last_data = data; | |||||
uint16_t bitmap = CONSUMER2BLUEFRUIT(data); | |||||
#ifdef BLUEFRUIT_TRACE_SERIAL | |||||
dprintf("\nData: "); | |||||
debug_hex16(data); | |||||
dprintf("; bitmap: "); | |||||
debug_hex16(bitmap); | |||||
dprintf("\n"); | |||||
bluefruit_trace_header(); | |||||
#endif | |||||
bluefruit_serial_send(0xFD); | |||||
bluefruit_serial_send(0x00); | |||||
bluefruit_serial_send(0x02); | |||||
bluefruit_serial_send((bitmap>>8)&0xFF); | |||||
bluefruit_serial_send(bitmap&0xFF); | |||||
bluefruit_serial_send(0x00); | |||||
bluefruit_serial_send(0x00); | |||||
bluefruit_serial_send(0x00); | |||||
bluefruit_serial_send(0x00); | |||||
#ifdef BLUEFRUIT_TRACE_SERIAL | |||||
bluefruit_trace_footer(); | |||||
#endif | |||||
} | |||||
/* | |||||
Bluefruit Protocol for TMK firmware | |||||
Author: Benjamin Gould, 2013 | |||||
Based on code Copyright 2011 Jun Wako <[email protected]> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#ifndef VUSB_H | |||||
#define VUSB_H | |||||
#include "host_driver.h" | |||||
host_driver_t *bluefruit_driver(void); | |||||
#endif |
/* | |||||
Bluefruit Protocol for TMK firmware | |||||
Author: Benjamin Gould, 2013 | |||||
Based on code Copyright 2011 Jun Wako <[email protected]> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include <stdint.h> | |||||
#include <avr/interrupt.h> | |||||
#include <avr/wdt.h> | |||||
#include <avr/sleep.h> | |||||
#include <util/delay.h> | |||||
#include "serial.h" | |||||
#include "keyboard.h" | |||||
#include "usb.h" | |||||
#include "host.h" | |||||
#include "timer.h" | |||||
#include "print.h" | |||||
#include "debug.h" | |||||
#include "sendchar.h" | |||||
#include "suspend.h" | |||||
#include "bluefruit.h" | |||||
#include "pjrc.h" | |||||
#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n)) | |||||
#define HOST_DRIVER_NOT_SET 0 | |||||
#define BLUEFRUIT_HOST_DRIVER 1 | |||||
#define PJRC_HOST_DRIVER 2 | |||||
int main(void) | |||||
{ | |||||
CPU_PRESCALE(0); | |||||
DDRD = _BV(PD5); | |||||
DDRB = _BV(PB0); | |||||
PORTD = _BV(PD5); | |||||
PORTB = _BV(PB0); | |||||
print_set_sendchar(sendchar); | |||||
usb_init(); | |||||
_delay_ms(2000); | |||||
// while (!usb_configured()) /* wait */ | |||||
dprintf("Initializing keyboard...\n"); | |||||
keyboard_init(); | |||||
// This implementation is pretty simplistic... if the USB connection | |||||
// is not configured, choose the Bluefruit, otherwise use USB | |||||
// Definitely would prefer to have this driven by an input pin and make | |||||
// it switch dynamically - BCG | |||||
if (!usb_configured()) { | |||||
// Send power to Bluefruit... Adafruit says it takes 27 mA, I think | |||||
// the pins should provide 40 mA, but just in case I switch the | |||||
// Bluefruit using a transistor - BCG | |||||
DDRB = _BV(PB6); | |||||
PORTB |= _BV(PB6); | |||||
dprintf("Setting host driver to bluefruit...\n"); | |||||
host_set_driver(bluefruit_driver()); | |||||
dprintf("Initializing serial...\n"); | |||||
serial_init(); | |||||
// wait an extra second for the PC's operating system | |||||
// to load drivers and do whatever it does to actually | |||||
// be ready for input | |||||
_delay_ms(1000); | |||||
PORTD = ~_BV(PD5); | |||||
dprintf("Starting main loop"); | |||||
while (1) { | |||||
keyboard_task(); | |||||
} | |||||
} else { | |||||
// I'm not smart enough to get this done with LUFA - BCG | |||||
dprintf("Setting host driver to PJRC...\n"); | |||||
host_set_driver(pjrc_driver()); | |||||
#ifdef SLEEP_LED_ENABLE | |||||
sleep_led_init(); | |||||
#endif | |||||
// wait an extra second for the PC's operating system | |||||
// to load drivers and do whatever it does to actually | |||||
// be ready for input | |||||
_delay_ms(1000); | |||||
PORTB = ~_BV(PB0); | |||||
dprintf("Starting main loop"); | |||||
while (1) { | |||||
while (suspend) { | |||||
suspend_power_down(); | |||||
if (remote_wakeup && suspend_wakeup_condition()) { | |||||
usb_remote_wakeup(); | |||||
} | |||||
} | |||||
keyboard_task(); | |||||
} | |||||
} | |||||
} |