You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
This repo is archived. You can view files and clone it, but cannot push or open issues/pull-requests.

Makefile 2.9KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596
  1. # Target file name (without extension).
  2. TARGET = m0110_lufa
  3. # Directory common source filess exist
  4. TMK_DIR = ../../tmk_core
  5. # Directory keyboard dependent files exist
  6. TARGET_DIR = .
  7. # keyboard dependent files
  8. SRC = matrix.c \
  9. led.c \
  10. keymap_common.c \
  11. m0110.c
  12. # To use own keymap file run make like: make keymap=hasu
  13. ifdef KEYMAP
  14. SRC += keymap_$(KEYMAP).c
  15. else
  16. SRC += keymap_default.c
  17. endif
  18. CONFIG_H = config.h
  19. # MCU name, you MUST set this to match the board you are using
  20. # type "make clean" after changing this, so all files will be rebuilt
  21. MCU = atmega32u2 # TMK converter rev2
  22. #MCU = atmega32u4 # TMK converter rev1
  23. # Processor frequency.
  24. # Normally the first thing your program should do is set the clock prescaler,
  25. # so your program will run at the correct speed. You should also set this
  26. # variable to same clock speed. The _delay_ms() macro uses this, and many
  27. # examples use this variable to calculate timings. Do not add a "UL" here.
  28. F_CPU = 16000000
  29. #
  30. # LUFA specific
  31. #
  32. # Target architecture (see library "Board Types" documentation).
  33. ARCH = AVR8
  34. # Input clock frequency.
  35. # This will define a symbol, F_USB, in all source code files equal to the
  36. # input clock frequency (before any prescaling is performed) in Hz. This value may
  37. # differ from F_CPU if prescaling is used on the latter, and is required as the
  38. # raw input clock is fed directly to the PLL sections of the AVR for high speed
  39. # clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
  40. # at the end, this will be done automatically to create a 32-bit value in your
  41. # source code.
  42. #
  43. # If no clock division is performed on the input clock inside the AVR (via the
  44. # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
  45. F_USB = $(F_CPU)
  46. # Interrupt driven control endpoint task
  47. OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
  48. # Boot Section Size in bytes
  49. # Teensy halfKay 512
  50. # Atmel DFU loader 4096
  51. # LUFA bootloader 4096
  52. OPT_DEFS += -DBOOTLOADER_SIZE=4096
  53. # Build Options
  54. # *Comment out* to disable the options.
  55. #
  56. #BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
  57. MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
  58. EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
  59. CONSOLE_ENABLE = yes # Console for debug(+400)
  60. COMMAND_ENABLE = yes # Commands for debug and configuration
  61. #SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
  62. #NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
  63. #KEYMAP_SECTION_ENABLE = yes # fixed address keymap for keymap editor
  64. #---------------- Programming Options --------------------------
  65. PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
  66. # Search Path
  67. VPATH += $(TARGET_DIR)
  68. VPATH += $(TMK_DIR)
  69. include $(TMK_DIR)/protocol/lufa.mk
  70. include $(TMK_DIR)/protocol.mk
  71. include $(TMK_DIR)/common.mk
  72. include $(TMK_DIR)/rules.mk