- Changing header file ifndef define to pragma once's
- Removed duplicate output_com.h's

- Interrupt vector table position fix (affected everything in the firmware)
- Added fault debug messages
- Fixed usbMuxUart

- Basic screen initialization and clear is working
- Currently SPI is set to a low speed for easy logic analyzer debugging

* Keyboard interconnect using two uarts
* Supports daisy chain addressing using a master/slave direction communication scheme

- Still needs more testing
- Functions have been tested alone to be generally working

Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.

Fixes #22

Each (dfu) interface may have more than one a ltsetting each with their own index and name. According to the DFU_1.1 pdf section 4.2.3, "* Alternate settings can be used by an application to access additional memory segments. In this case,
it is suggested that each alternate setting employ a string descriptor to indicate the target memory
segment; e.g., 'EEPROM'." Whether or not we end up using multiple memory segments it is still good to have a descriptive name incase there are other dfu devices connected.

Edit: Fixed previous indentation

Fixes #22

Each (dfu) interface may have more than one a ltsetting each with their own index and name. According to the DFU_1.1 pdf section 4.2.3, "* Alternate settings can be used by an application to access additional memory segments. In this case,
it is suggested that each alternate setting employ a string descriptor to indicate the target memory
segment; e.g., 'EEPROM'." Whether or not we end up using multiple memory segments it is still good to have a descriptive name incase there are other dfu devices connected.

- If dfu-suffix is not found, a warning is given and the binary is not signed
- Unsigned binaries are still ok with the latest version of dfu-util

Can be specified from any .kll file

DebounceDivThreshold = 0xFFFFFFFF
Sets to max debounce, default is 0xFFFF.
The 0xFFFFFFFF is about a 2x longer debounce
The max requires more ram (as it uses 32 bit variables instead of 16).

Added support for submodule capabilities files.

- Removing old cli arguments

cmake -DREFRESH_KLL=1 ..

- Added AddModule CMake function which simplifies specifying module requirements

- When loading a garbage image onto the device, the chip hangs
  and refuses to jump to the bootloader and start dfu

Fix
- Check if chip was in locked state and jump to dfu
- Check if watchdog timer fired and jump to dfu

- Currently builds larger binaries than gcc (RAM)

- Not ready yet
- Will require some more changes to Lib/mk20dx.c

- Minimum protection size is 4k on the mk20dx128vlf5

- Bootloader doesn't build correctly on gcc 4.7.3 (LTO issues)
- Even disabling isn't good enough
- 4.9.1 is known to work on Arch Linux

- Added layout files for 50 key and kishsaver
- Not yet working (some USB issues on AVR to debug)
- Fixed an OSX issue when building AVR
- Cleanup

- Automatically downloads the kll compiler if not found
- Added capability files to each of the module that currently have them
- Split modules.cmake so kll.cmake could influence build targets (also needs info from modules.cmake)
- Updated .gitignore for kll compiler directory
- Added documentation on how to manipulate layouts using CMakeLists.txt
- Cleanup of old layout files

- Heavily modified, not compatible with McHCK images
- Uses 4k of Flash (rather than 3k)
- LED turns on when in firmware flash mode
- Changed the USB IDs
- Added CMake build system
- Updated linker script to be closer to what is used for the rest of the projects
- Removed a lot of unnecessary code
- Added a license header to each file (using the same license as the McHCK had)
- Updated the USB Vendor, Product and Serial strings
- Using the Kiibohd initialization sequence rather than the McHCK one
- Using Kiibohd interrupt vector table and other misc mk20dx setup

- Changed static variables to const that should have been const
- Updated CMake files to prepare for MCHCK custom bootloader
- Changed the USB ID numbers and ID number for bootloader
- Only generate DFU or Teensy binary image, not both
- Fixed RAM and FLASH calculator
- Added missing license in delay.c/h (much of it was taken from Teensy source though I've changed a bunch of it)
- Prepared mk20dx.c for upcoming bootloader addition
- mk20dx.h cleanup
- Reduced the MCHCK based flash size for the application image (bootloader changes requires more flash space)
- Fixed bugs in macro.c
- Added keyHold cli command
- Added show pending events debug message for PartialMap macro module

- Cleaned up Macro and USB callback naming
- Added security jumper for automated reload (MCHCK based only)
- Added additional LED position

- Requires special string to be compared with the bootloader and VBAT register file

- McHCK uses FLL instead of the PLL for USB (startup, not usb init)
- Added optional debug for the pjrc USB module
- Cleaned up compiler flags

- Lots of code cleanup for the intialization of all arm chips
- Added more gcc flags to help with debugging linker and memory map
- Fixed UART initialization for the smaller MCHCK mk20dx128 (different pin mux)

- Basic compilation and loading is working
- LED can be turned on/off
- USB not yet working

- Added executable detection script
- Build will still work fine if ctags isn't installed

- Tried to add auto cmake reset...so far unsuccessful
- Ported MBC-55X (was used to test compilers)
- Disabled in-source builds, to prevent CMake from shooting itself in the foot.

- Uses an internal database of microcontroller sizes

- Only one file to edit now
- Compiler architecture automatically detected based off of chip target