Archived
1
0
Commit Graph

26 Commits

Author SHA1 Message Date
Jacob Alexander
46765e85c5 Adding dynamic USB power support
- Each scan module now has a current change callback which passes the available current as a parameter
- No longer attempts to use the max 500 mA immediately, starts with 100 mA then goes to 500 mA after enumeration
- If enumeration fails due to bMaxPower of 500 mA, then attempt again at 100 mA (might also be possible to go even lower to 20 mA in certain cases)
- Now working with the Apple Ipad (no over-power messages)
- Fixed Wake-up behaviour on Apple Ipad (and likely other iOS devices)
- More effecient set_feature/clear_feature handling (device handler)
- Initial power handling via Interconnect (still needs work to get it more dynamic)
2016-02-21 19:56:52 -08:00
Jacob Alexander
59d425ccfe Adding jump to bootloader key
- Now enabled by default
- Added protection around remote jumps
2015-10-11 22:07:11 -07:00
Jacob Alexander
f4da2560c4 Fixing long-standing SET_REPORT bug
- Implementation was completely wrong (has never worked properly)
- Now working in both NKRO and 6KRO modes
- Added more debugging code if things go wrong again
2015-10-09 18:20:37 -07:00
Jacob Alexander
c90bafd5c4 Cleaning up CLEAR_FEATURE (endpoint)
- Reverting old fix that no longer seems relevant after numerous recent USB fixes
2015-10-06 00:24:04 -07:00
Jacob Alexander
3f83274f86 Prep for mouse support 2015-09-20 18:47:10 -07:00
Jacob Alexander
9c52fb32fa Fixing default ErgoDox layout and adding FlashMode button
- Adds proper flashMode support for all keyboards and microcontrollers (usb and serial)
- flashModeEnabled must be set to 1 otherwise it will only show an error
  * This is on purpose (somewhat dangerous feature as it allows remote flashing)
- Capability cleanup
2015-08-21 19:43:45 -07:00
Jacob Alexander
20b62afb9a FIxing Media Keys and general USB compatibilty
- Media keys tested working on Linux/Windows/Mac (use Consumer control)
- Fixed enumeration delays
- Fixed virtual serial port configuration issues
- Fixed GET_REPORT and SET_REPORT
- Added intial descriptors and endpoints for Mouse and Joystick devices
- Split out the consumer and system control endpoint
- Added more fault debugging messages
- Added interface names to endpoints (visible in Windows Device Manager)
- Added KLL define for keyboard locale
2015-08-19 00:01:15 -07:00
Jacob Alexander
55d03f448e UARTConnect enumeration working!
- Fixed cli reflash mode set
- Cleaned up debugging code
- 4 500 000 baud seems to be reliable
- Fixed master selection (assumes slave node unless USB enumerates)
2015-07-18 18:53:21 -07:00
Jacob Alexander
6c67bc77bc Revert "Merge pull request #27 from smasher816/wakeup-devel"
This reverts commit 622ea5d85f, reversing
changes made to c21439cb48.
2015-06-23 08:00:16 -07:00
Rowan Decker
dc562cdcb3 Inital Remote Wakeup Support
Not working yet...
2015-03-08 22:35:55 -07:00
Jacob Alexander
55346314b8 Adding additional case statements for SET_FEATURE and CLEAR_FEATURE
- Ignoring (which is done by default)
- Device, Interface and Endpoint variants
2015-03-07 00:50:42 -08:00
Jacob Alexander
b2dfd63d4b Fixing Mac OSX freeze on wake-up bug
- CLEAR_FEATURE unset is currently causing the keyboarod to freeze
- Though not ideal, it seems harmless to ignore this USB Control Packet
- Tested working on a Mac Mini (Yosemite)
2015-03-07 00:34:14 -08:00
Jacob Alexander
9e3d3aaca4 Initial code for USB cable detection
- Currently actual detection commented out due to issues
2015-02-09 13:21:23 -08:00
Jacob Alexander
c939059c7f Fixing NKRO on Windows 8.1
- Had to re-write descriptor to support Windows 8.1 while still working with Mac OSX
- NKRO keyboard is now more bandwidth intensive as all the keys must be updated at the same time
  (due to 8.1 bug in the HID spec)
2014-11-12 23:04:50 -08:00
Jacob Alexander
774ccc7fe9 Code formatting cleanup. 2014-11-10 23:42:39 -08:00
Jacob Alexander
4255a99fcc More preparation for NKRO USB for arm
- Added NKRO descriptor
- Added NKRO HID descriptor
- Updated boot HID descriptor
- Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 16:44:57 -07:00
Jacob Alexander
eabb1c546a Fixing RAM calculator and reduced actual SRAM usage
- Changed static variables to const that should have been const
- Updated CMake files to prepare for MCHCK custom bootloader
- Changed the USB ID numbers and ID number for bootloader
- Only generate DFU or Teensy binary image, not both
- Fixed RAM and FLASH calculator
- Added missing license in delay.c/h (much of it was taken from Teensy source though I've changed a bunch of it)
- Prepared mk20dx.c for upcoming bootloader addition
- mk20dx.h cleanup
- Reduced the MCHCK based flash size for the application image (bootloader changes requires more flash space)
- Fixed bugs in macro.c
- Added keyHold cli command
- Added show pending events debug message for PartialMap macro module
2014-08-15 10:49:44 -07:00
Jacob Alexander
d6345c307f Initial MatrixARM implementation
- Cleaned up Macro and USB callback naming
- Added security jumper for automated reload (MCHCK based only)
- Added additional LED position
2014-08-01 01:26:25 -07:00
Jacob Alexander
8eba0ae354 Adding McHCK flash reload function and some cleanup.
- Requires special string to be compared with the bootloader and VBAT register file
2014-07-19 09:21:35 -07:00
Jacob Alexander
54c11ebd07 McHCK USB WORKS!!
- McHCK uses FLL instead of the PLL for USB (startup, not usb init)
- Added optional debug for the pjrc USB module
- Cleaned up compiler flags
2014-07-15 00:28:12 -07:00
Jacob Alexander
6f563bdc9f Initial code for ARM UART output module (mainly for CLI) 2014-06-28 13:55:25 -07:00
Jacob Alexander
99d4aaba84 More work on mk20dx128vlf5 port.
- Basic compilation and loading is working
- LED can be turned on/off
- USB not yet working
2014-06-28 13:55:25 -07:00
Jacob Alexander
3fa9c16c04 File and macro modifications for supporting Teensy 3.1 2014-03-22 14:14:23 -07:00
Jacob Alexander
25304734af Adding in USB module updates from Teensyduino 1.18rc2.
- For potential bug fixes
- Not copied verbatim, some additions were left out
2014-03-22 14:14:23 -07:00
Jacob Alexander
6ac1482862 Added more CLI commands.
- reset   -> Simulates power cycle (Not yet compatible with AVR)
- reload  -> Sets the device into firmware reload mode
- led     -> Toggles the error LED
- version -> Displays detailed version information (additions to CMake files was necessary, might have broken Windows builds...)
2014-03-22 14:11:49 -07:00
Jacob Alexander
59f13f8f4f Moving USB to Output in preparation for additional Output types.
* Initial cli code
2014-03-22 14:09:01 -07:00