Archived
1
0
Commit Graph

51 Commits

Author SHA1 Message Date
Jacob Alexander
18aef02a1f Adding relative movement mouse key support
- Still very basic (lots of room for improvement)
- Capability format will likely change at some point
- 16 bit movement control, however repeat rate limits usability (will need KLL 0.4 to make better)
2016-03-21 23:05:41 -07:00
Jacob Alexander
3c9a97d51a Adding basic mouse button support
- Full Mouse support will have to wait for KLL 0.6
  * This will include dynamic HID descriptor generation for many wheels and axis depending on the KLL needs
- HID descriptor is currently limited to 8 buttons
- Technically mouse movement also works (tested by accident), but it's disable for now (needs some API thought)

- Adding additional udev rules
- Added KRO mode default define
2016-03-21 00:51:51 -07:00
Jacob Alexander
46765e85c5 Adding dynamic USB power support
- Each scan module now has a current change callback which passes the available current as a parameter
- No longer attempts to use the max 500 mA immediately, starts with 100 mA then goes to 500 mA after enumeration
- If enumeration fails due to bMaxPower of 500 mA, then attempt again at 100 mA (might also be possible to go even lower to 20 mA in certain cases)
- Now working with the Apple Ipad (no over-power messages)
- Fixed Wake-up behaviour on Apple Ipad (and likely other iOS devices)
- More effecient set_feature/clear_feature handling (device handler)
- Initial power handling via Interconnect (still needs work to get it more dynamic)
2016-02-21 19:56:52 -08:00
Jacob Alexander
ea82a2762b Typo from the last commit. 2015-10-17 21:03:07 -07:00
Jacob Alexander
343104297d Adding support for kll 0.3d
- Requires kll compiler update
- Includes descriptor update to handle new consumer control codes
2015-10-17 15:09:03 -07:00
Jacob Alexander
7e68e81f47 Adding basic remote capabilities + UART Rx DMA buffers
- Rx buffers weren't fast enough, had to use DMA :D
- Basic LCD remote capabilities are working, single node
- Multi-node broadcast seems to have a bug still
- DMA ring buffer allowed for significant processing simplification
  * There is an overrun risk, but the buffer is large and generally there isn't too much data being sent (just very quickly)
- Split out LCD layer stack capability into itself and an "exact" version used for updating remote nodes
2015-10-15 00:21:54 -07:00
Jacob Alexander
59d425ccfe Adding jump to bootloader key
- Now enabled by default
- Added protection around remote jumps
2015-10-11 22:07:11 -07:00
Jacob Alexander
f4da2560c4 Fixing long-standing SET_REPORT bug
- Implementation was completely wrong (has never worked properly)
- Now working in both NKRO and 6KRO modes
- Added more debugging code if things go wrong again
2015-10-09 18:20:37 -07:00
Jacob Alexander
c90bafd5c4 Cleaning up CLEAR_FEATURE (endpoint)
- Reverting old fix that no longer seems relevant after numerous recent USB fixes
2015-10-06 00:24:04 -07:00
Jacob Alexander
3f83274f86 Prep for mouse support 2015-09-20 18:47:10 -07:00
Jacob Alexander
9c52fb32fa Fixing default ErgoDox layout and adding FlashMode button
- Adds proper flashMode support for all keyboards and microcontrollers (usb and serial)
- flashModeEnabled must be set to 1 otherwise it will only show an error
  * This is on purpose (somewhat dangerous feature as it allows remote flashing)
- Capability cleanup
2015-08-21 19:43:45 -07:00
Jacob Alexander
1cbc175551 Forgot to add these files in an earlier commit 2015-08-21 18:26:46 -07:00
Jacob Alexander
20b62afb9a FIxing Media Keys and general USB compatibilty
- Media keys tested working on Linux/Windows/Mac (use Consumer control)
- Fixed enumeration delays
- Fixed virtual serial port configuration issues
- Fixed GET_REPORT and SET_REPORT
- Added intial descriptors and endpoints for Mouse and Joystick devices
- Split out the consumer and system control endpoint
- Added more fault debugging messages
- Added interface names to endpoints (visible in Windows Device Manager)
- Added KLL define for keyboard locale
2015-08-19 00:01:15 -07:00
Jacob Alexander
55d03f448e UARTConnect enumeration working!
- Fixed cli reflash mode set
- Cleaned up debugging code
- 4 500 000 baud seems to be reliable
- Fixed master selection (assumes slave node unless USB enumerates)
2015-07-18 18:53:21 -07:00
Jacob Alexander
6c67bc77bc Revert "Merge pull request #27 from smasher816/wakeup-devel"
This reverts commit 622ea5d85f, reversing
changes made to c21439cb48.
2015-06-23 08:00:16 -07:00
Jacob Alexander
5f262ea4b6 Code cleanup
- Changing header file ifndef define to pragma once's
- Removed duplicate output_com.h's
2015-06-14 14:33:40 -07:00
Jacob Alexander
1acbc97e98 Adding initial dfu-upload code and debugging for Bootloader. 2015-06-14 14:33:39 -07:00
Jacob Alexander
622ea5d85f Merge pull request #27 from smasher816/wakeup-devel
Inital Remote Wakeup Support
2015-06-12 18:31:55 -07:00
Rowan Decker
dc562cdcb3 Inital Remote Wakeup Support
Not working yet...
2015-03-08 22:35:55 -07:00
Rowan Decker
2922fce0f7 Merge remote-tracking branch 'upstream/master' 2015-03-08 20:17:39 -07:00
Rowan Decker
1392571bd7 Fix whitespace
Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-08 18:40:01 -07:00
Jacob Alexander
55346314b8 Adding additional case statements for SET_FEATURE and CLEAR_FEATURE
- Ignoring (which is done by default)
- Device, Interface and Endpoint variants
2015-03-07 00:50:42 -08:00
Jacob Alexander
b2dfd63d4b Fixing Mac OSX freeze on wake-up bug
- CLEAR_FEATURE unset is currently causing the keyboarod to freeze
- Though not ideal, it seems harmless to ignore this USB Control Packet
- Tested working on a Mac Mini (Yosemite)
2015-03-07 00:34:14 -08:00
Jacob Alexander
0ec5e6d9c2 Adding missing NL's for Cons and Sys Control debug 2015-02-23 22:25:46 -08:00
Jacob Alexander
7597fea053 Adding outputDebug command
- Displays all of the bytes sent via USB
- Different display mode for NKRO and Boot modes
2015-02-21 13:06:28 -08:00
Jacob Alexander
9e3d3aaca4 Initial code for USB cable detection
- Currently actual detection commented out due to issues
2015-02-09 13:21:23 -08:00
Jacob Alexander
8e54672121 Fixing warning messages found using clang. 2014-12-31 19:43:10 -08:00
Jacob Alexander
c939059c7f Fixing NKRO on Windows 8.1
- Had to re-write descriptor to support Windows 8.1 while still working with Mac OSX
- NKRO keyboard is now more bandwidth intensive as all the keys must be updated at the same time
  (due to 8.1 bug in the HID spec)
2014-11-12 23:04:50 -08:00
Jacob Alexander
774ccc7fe9 Code formatting cleanup. 2014-11-10 23:42:39 -08:00
Jacob Alexander
11fb8bd77d Fixing Linux NKRO Delete bug
- Fixed descriptor to not include USB Code 156 (Clear)
- This USB Code affects repeating Delete
2014-11-10 21:02:25 -08:00
Jacob Alexander
9dbd155ebf Fixing Mac OSX USB NKRO
- OSX doesn't properly follow the spec when it comes to padding bits (when using bitfields)
- Everything seems to work when I don't use them
- NKRO tested working on OSX
2014-11-02 23:24:59 -08:00
Jacob Alexander
e251a8be50 Fixing pjrc bug affecting Mac OSX CDC driver
- Also updating usbMuxUart header with most recent keyboard defines
2014-11-01 14:42:55 -07:00
Jacob Alexander
0cbfe53794 Fixed Linux NKRO bitmap bug.
- Thanks hasu for pointing it out
- Keycode 50 is problematic under Linux, so removing (it's a duplicate keycode anyways)
2014-10-02 01:40:14 -07:00
Jacob Alexander
fc84d45470 Setting max packet size (Interrupt) to 64 bytes
- 128 bytes is invalid for USB 2.0 Full-Speed (max 64 bytes)
2014-10-01 23:54:08 -07:00
Jacob Alexander
5782af5541 Fixing NKRO for Windows. 2014-10-01 00:16:14 -07:00
Jacob Alexander
ab7351b482 USB NKRO working for ARM!
- Setting NKRO mode as default (up to bios to disable)
2014-09-28 17:24:52 -07:00
Jacob Alexander
4255a99fcc More preparation for NKRO USB for arm
- Added NKRO descriptor
- Added NKRO HID descriptor
- Updated boot HID descriptor
- Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 16:44:57 -07:00
Jacob Alexander
ed9abf88a3 Preparing ARM for USB NKRO
- API changes from the AVR NKRO support
2014-09-21 16:29:53 -07:00
Jacob Alexander
eabb1c546a Fixing RAM calculator and reduced actual SRAM usage
- Changed static variables to const that should have been const
- Updated CMake files to prepare for MCHCK custom bootloader
- Changed the USB ID numbers and ID number for bootloader
- Only generate DFU or Teensy binary image, not both
- Fixed RAM and FLASH calculator
- Added missing license in delay.c/h (much of it was taken from Teensy source though I've changed a bunch of it)
- Prepared mk20dx.c for upcoming bootloader addition
- mk20dx.h cleanup
- Reduced the MCHCK based flash size for the application image (bootloader changes requires more flash space)
- Fixed bugs in macro.c
- Added keyHold cli command
- Added show pending events debug message for PartialMap macro module
2014-08-15 10:49:44 -07:00
Jacob Alexander
d6345c307f Initial MatrixARM implementation
- Cleaned up Macro and USB callback naming
- Added security jumper for automated reload (MCHCK based only)
- Added additional LED position
2014-08-01 01:26:25 -07:00
Jacob Alexander
8eba0ae354 Adding McHCK flash reload function and some cleanup.
- Requires special string to be compared with the bootloader and VBAT register file
2014-07-19 09:21:35 -07:00
Jacob Alexander
54c11ebd07 McHCK USB WORKS!!
- McHCK uses FLL instead of the PLL for USB (startup, not usb init)
- Added optional debug for the pjrc USB module
- Cleaned up compiler flags
2014-07-15 00:28:12 -07:00
Jacob Alexander
6f563bdc9f Initial code for ARM UART output module (mainly for CLI) 2014-06-28 13:55:25 -07:00
Jacob Alexander
99d4aaba84 More work on mk20dx128vlf5 port.
- Basic compilation and loading is working
- LED can be turned on/off
- USB not yet working
2014-06-28 13:55:25 -07:00
Jacob Alexander
15ec4ff71c Adding CLI and CDC Serial support for Teensy 2.0 and Teensy 2.0++
- Includes serial putchar and getchar cleanup (overall)
- Moved avr-capsense to DPH (renaming)
- Basic cleanup for including CLI on the avr architecture
2014-03-31 01:07:48 -07:00
Jacob Alexander
8263589e7e Finished USB for Teensy 3.1 (Now 3.1 compatible!) 2014-03-22 14:14:23 -07:00
Jacob Alexander
3fa9c16c04 File and macro modifications for supporting Teensy 3.1 2014-03-22 14:14:23 -07:00
Jacob Alexander
25304734af Adding in USB module updates from Teensyduino 1.18rc2.
- For potential bug fixes
- Not copied verbatim, some additions were left out
2014-03-22 14:14:23 -07:00
Jacob Alexander
6ac1482862 Added more CLI commands.
- reset   -> Simulates power cycle (Not yet compatible with AVR)
- reload  -> Sets the device into firmware reload mode
- led     -> Toggles the error LED
- version -> Displays detailed version information (additions to CMake files was necessary, might have broken Windows builds...)
2014-03-22 14:11:49 -07:00
Jacob Alexander
85dd7f5c52 More renaming for the USB to Output Module renaming 2014-03-22 14:09:50 -07:00