- CMake 3.6 finally adds proper cross-compiler detection
- When detected, use full compiler detection infrastructure
- Still maintains compatibility back to CMake 2.8 (at least for now)
- With new detection, selecting only the C compiler as it speeds up the CMake generaion process
- Added a GCC 4.9 minimum version requirement for Bootloader

Fixes this warning message:
	dfu-util: unable to read DFU status after completion

Results in:
	Download done.
	state(7) = dfuMANIFEST, status(0) = No error condition is present
	state(8) = dfuMANIFEST-WAIT-RESET, status(0) = No error condition is present
	Done!

Functionally no different, just a better user experience.

- mk20dx128vlf5 doesn't have enough bootloader space left
- Downloads the entire firmware flash (not the bootloader)
- Currently no intelligence built-in to determine full size of firmware (tricky, and sometimes not useful)

- Instead of stalling at Device Qualification and Debug descriptors, return 0

- Add _app_rom_end address location that points to the end of flash
- Check when flashing each page whether the end of the page exceeds the end of the flash

- Use commit number as the basis for bcdDevice field (maximum is 2^16)
- Change iSerial from commit date to chip Unique ID
- Update both Firmware and Bootloader to use the same scheme (bcdDevice and iSerial)
- Cleanup of Bootloader code
- Split out build info CMake commands to a new file

- Added clang (i.e. multi-compiler) support to convenience build scripts
- Updated README
- Added Bootloader build scripts for the two main versions currently used
- Added uartOut and usbMuxUart build scripts (these tend to suffer from build rot the most as they're only used in debugging)
- Attempt to get clang support for the Bootloader
  * clang is missing compiler extensions, so this may require a large re-write to get working

- This amount of current is guaranteed by the USB spec before enumeration
- Generally the bootloader doesn't need nearly this much, but to be safe

bash might not be in /bin. Don't expect it there.

- Fixed cli reflash mode set
- Cleaned up debugging code
- 4 500 000 baud seems to be reliable
- Fixed master selection (assumes slave node unless USB enumerates)

- Changing header file ifndef define to pragma once's
- Removed duplicate output_com.h's

- Interrupt vector table position fix (affected everything in the firmware)
- Added fault debug messages
- Fixed usbMuxUart

- Basic screen initialization and clear is working
- Currently SPI is set to a low speed for easy logic analyzer debugging

Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.

Fixes #22

Each (dfu) interface may have more than one a ltsetting each with their own index and name. According to the DFU_1.1 pdf section 4.2.3, "* Alternate settings can be used by an application to access additional memory segments. In this case,
it is suggested that each alternate setting employ a string descriptor to indicate the target memory
segment; e.g., 'EEPROM'." Whether or not we end up using multiple memory segments it is still good to have a descriptive name incase there are other dfu devices connected.

Edit: Fixed previous indentation

Fixes #22

Each (dfu) interface may have more than one a ltsetting each with their own index and name. According to the DFU_1.1 pdf section 4.2.3, "* Alternate settings can be used by an application to access additional memory segments. In this case,
it is suggested that each alternate setting employ a string descriptor to indicate the target memory
segment; e.g., 'EEPROM'." Whether or not we end up using multiple memory segments it is still good to have a descriptive name incase there are other dfu devices connected.

- When loading a garbage image onto the device, the chip hangs
  and refuses to jump to the bootloader and start dfu

Fix
- Check if chip was in locked state and jump to dfu
- Check if watchdog timer fired and jump to dfu

- Not ready yet
- Will require some more changes to Lib/mk20dx.c

- Bootloader doesn't build correctly on gcc 4.7.3 (LTO issues)
- Even disabling isn't good enough
- 4.9.1 is known to work on Arch Linux

- Fixed USB Vendor name as well

- Heavily modified, not compatible with McHCK images
- Uses 4k of Flash (rather than 3k)
- LED turns on when in firmware flash mode
- Changed the USB IDs
- Added CMake build system
- Updated linker script to be closer to what is used for the rest of the projects
- Removed a lot of unnecessary code
- Added a license header to each file (using the same license as the McHCK had)
- Updated the USB Vendor, Product and Serial strings
- Using the Kiibohd initialization sequence rather than the McHCK one
- Using Kiibohd interrupt vector table and other misc mk20dx setup