USB - General
- Refactored descriptors
- Enabled/Disable USB endpoints
- Added debug flags for special features
- Code cleanup
- Interface count calculation based off of enabled endpoints
- Delayed wTotalLength calculation to simplify descriptor offsets
- Re-ordered endpoints and interfaces
- Added more debug output
- Added usbInitTime to show how long keyboard initialization took
  (Useful when debugging bad init sequences)
- Added function for usb_resume() which takes care of the resume sequence
  * Resume is now only called if packets are starting to timeout

USB - Special Options
- Added enableDeviceRestartOnUSBTimeout
  * A last resort hammer for bad USB Chipsets/OSs, don't use if you can help it
  * Disabled
- Added enableUSBResume
  * Enables host resume wake-up signalling, required to wake a computer from sleep
  * Enabled
- Added enableUSBLowPowerNegotiation
  * Enables power negotiation hack
  * Required to use firmware with an IPad and other hard-limit low-power USB hosts
  * Hasn't been tested with the recent changes
  * Disabled
- Added enableUSBSuspend
  * Enables power down events on host USB bus suspend
  * Enabled

USB - Keyboard
- Attempted to cleanup HID SET_REPORT
  * Works much better
  * Still has an issue under Linux which generates *a lot* of NAKs (initializes quickly regardless)
    + Not present on other keyboards
    + SETUP -> OUT -> IN : This sequence is the problem
    + Specifically during the OUT phase
- Enabled

USB - CDC Virtual Serial Port
- Code cleanup
- Added convenience struct USBCDCLineCoding for easier debugging
- Attempted to cleanup CDC_SET_LING_CODING
  * Works much better
  * Still has an issue under Linux which generates *a lot* of NAKs (initializes quickly regardless)
    + SETUP -> OUT -> IN : This sequence is the problem
    + Specifically during the OUT phase
    + Likely the same issues as HID SET_REPORT
- Enabled

USB - Mouse
- Enabled

USB - Joystick
- Disabled

USB - RawIO
- Initial code, API not used yet
- Disabled

DFU
- Updated load script, now faster

- Somewhat aggresive, may cause restarts if the keyboard/OS hasn't fully intialized the keyboard
- Added GET_IDLE handling and correct usage of SET_IDLE
- Initial implementation of idle send, commented out as it causes issues on Mac OSX for sleeping
  (keyboard has been working without it)
- MacOSX seems to have some sort of data corruption on the USB link, not sure why (other OSs have no issues)
- Cleaned up some code
- Added a longer sleep after the resume sequence to prevent possible issues sending keys too soon
  (may need to be increased more)

Ipad support now seems flaky, though Mac, Windows seems solid.
Init sequence on Linux seems slow, even though there are no errors.

- Still very basic (lots of room for improvement)
- Capability format will likely change at some point
- 16 bit movement control, however repeat rate limits usability (will need KLL 0.4 to make better)

- Full Mouse support will have to wait for KLL 0.6
  * This will include dynamic HID descriptor generation for many wheels and axis depending on the KLL needs
- HID descriptor is currently limited to 8 buttons
- Technically mouse movement also works (tested by accident), but it's disable for now (needs some API thought)

- Adding additional udev rules
- Added KRO mode default define

- Each scan module now has a current change callback which passes the available current as a parameter
- No longer attempts to use the max 500 mA immediately, starts with 100 mA then goes to 500 mA after enumeration
- If enumeration fails due to bMaxPower of 500 mA, then attempt again at 100 mA (might also be possible to go even lower to 20 mA in certain cases)
- Now working with the Apple Ipad (no over-power messages)
- Fixed Wake-up behaviour on Apple Ipad (and likely other iOS devices)
- More effecient set_feature/clear_feature handling (device handler)
- Initial power handling via Interconnect (still needs work to get it more dynamic)

- Adds proper flashMode support for all keyboards and microcontrollers (usb and serial)
- flashModeEnabled must be set to 1 otherwise it will only show an error
  * This is on purpose (somewhat dangerous feature as it allows remote flashing)
- Capability cleanup

- Fixed cli reflash mode set
- Cleaned up debugging code
- 4 500 000 baud seems to be reliable
- Fixed master selection (assumes slave node unless USB enumerates)

- Changing header file ifndef define to pragma once's
- Removed duplicate output_com.h's

- Required for 0.3b update of the KLL compiler.

- Displays all of the bytes sent via USB
- Different display mode for NKRO and Boot modes

- Currently actual detection commented out due to issues

- Fixed descriptor to not include USB Code 156 (Clear)
- This USB Code affects repeating Delete

- Tested both with Boot and NKRO modes

- Missing a byte in the array

- Thanks hasu for pointing it out
- Keycode 50 is problematic under Linux, so removing (it's a duplicate keycode anyways)

- When changing the mode, a key buffer flush is required (might confuse the OS temporarily)

- NKRO for USB Codes 4 to 164, 176 to 221 and modifiers
- Added System Control support codes 129 to 183
- Added Consumer Control support codes 32 to 668

- Only send USB events when something changes (rather than every ms)

- Macros and Layers are, code-wise, feature complete

- Refactored pjrc USB (definitions to the .h file)

- Code should be working, but much is untested
- All of the old modules will need to update and use the new DefaultMap keymap
- There might still be some naming conflicts with some Scan Modules

- Includes serial putchar and getchar cleanup (overall)
- Moved avr-capsense to DPH (renaming)
- Basic cleanup for including CLI on the avr architecture

- reset   -> Simulates power cycle (Not yet compatible with AVR)
- reload  -> Sets the device into firmware reload mode
- led     -> Toggles the error LED
- version -> Displays detailed version information (additions to CMake files was necessary, might have broken Windows builds...)

* Initial cli code

- Defined Manufacturer name
- Product name now references each of the selected modules
- Serial number refers to the last commit date, branch, and whether modified since the last commit

- CDC Output seems to be working
- USB Keyboard output has not been tested, but is "ready"
- UART and Timers have not been tested, or fully utilized
- Issues using Timer 0
- Initial template for MBC-55X Scan module (only module currently compatible with the arm build)
- Updated the interface to the AVR usb module for symmetry with the ARM usb module
- Much gutting was done to the Teensy 3 usb keyboard module, though not in an ideal state yet

- Very small updates to files, mostly modifying to remove name duplications

- Abstracted USB Module
- Abstracted compiler specific includes for Scan, Macro, Debug, and USB modules
- Updated CMake build files to support changes
- Added abstractions necessary to main.c as well as a compiler specific include file

- Commenting cleaned up
- usb_keyboard_debug is not finished yet in terms of cleanup (needs DEBUB_PRINT #ifdef's)
- Added LoadFile script generation
- Formalized KeyIndex and USBKeys data containers
- Split parts of scan_loop into Macro, USB, and main.c
- Added interface to USB modules
- Added interface to Macro modules
- Added proper Debug module enable/disable