- Only works in Prototype 2+
- No longer combining Interconnect and USB switching into the same pin (more flexibility)

- Each scan module now has a current change callback which passes the available current as a parameter
- No longer attempts to use the max 500 mA immediately, starts with 100 mA then goes to 500 mA after enumeration
- If enumeration fails due to bMaxPower of 500 mA, then attempt again at 100 mA (might also be possible to go even lower to 20 mA in certain cases)
- Now working with the Apple Ipad (no over-power messages)
- Fixed Wake-up behaviour on Apple Ipad (and likely other iOS devices)
- More effecient set_feature/clear_feature handling (device handler)
- Initial power handling via Interconnect (still needs work to get it more dynamic)

- Every 1000 ms, if no USB connection detected, swap to the other USB port

- Fixed cli reflash mode set
- Cleaned up debugging code
- 4 500 000 baud seems to be reliable
- Fixed master selection (assumes slave node unless USB enumerates)

- Basic screen initialization and clear is working
- Currently SPI is set to a low speed for easy logic analyzer debugging

Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.

- Heavily modified, not compatible with McHCK images
- Uses 4k of Flash (rather than 3k)
- LED turns on when in firmware flash mode
- Changed the USB IDs
- Added CMake build system
- Updated linker script to be closer to what is used for the rest of the projects
- Removed a lot of unnecessary code
- Added a license header to each file (using the same license as the McHCK had)
- Updated the USB Vendor, Product and Serial strings
- Using the Kiibohd initialization sequence rather than the McHCK one
- Using Kiibohd interrupt vector table and other misc mk20dx setup