Archived
1
0
This repo is archived. You can view files and clone it, but cannot push or open issues or pull requests.
keybrd/tutorials/tutorial_4_connecting_split_keyboards.md

3.8 KiB

keybrd Tutorial 4 - Connecting split keyboards

Split keyboards have left and right parts:

  • one keyboard half contains the controller and USB port.
  • the other keyboard half can contain shift registers or an I/O expander.

The two halves need to be connected. The preferred connection method depends on the number of keys, number of available controller pins, cable flexibility, LEDs, and cost.

Split keyboard connections table

connection type controller pins wire count max keys
just cable 3 6 9
just cable 3 7 12
just cable 4 8 16
just cable 4 9 20
2 PISO shift registers 3 5 16
3 PISO shift registers 3 5 24
I/O expander SPI 4 6 64
I/O expander I2C 2 4 64

Fewer wires makes a cable more flexible. A flexibility cable makes it easy to position the keyboard and route the cable. But if there are enough pins on the controller, using just a cable with more wires is simpler and costs less.

I/O Expanders can power LEDs, while PISO shift registers can not.

I2C is a little slow if the I/O expander is scanning more than 4 rows. The keybrd_DH (DodoHand) sketch polls 5 rows over I2C at 7.5ms per keyboard scan. Which is acceptable, but faster would be nicer.

Cables table

connector name wire count
TRRS 4
6-pin mini-DIN connector (PS/2) 4
USB 2 4
4P4C Modular connector (RJ9, RJ10, RJ22) handset plug 4
6P4C Modular connector (RJ-14) 2-line phone 4
6P6C Modular connector (RJ12) 3-line phone 6
eSATA 7
8p8c Modular connector (RJ45) Ethernet 8
USB 3.0, 3.1 9

Only ready-made cables that are widely available are listed. There are hundreds of other connectors listed at http://pinouts.ru/ There are also wireless options if you don't mind adding complexity and maintaining a battery.

The 8-wire "GearIT Cat 6 Ethernet Flat Patch Cable 7 Feet" is very flexible. It's available at Walmart (9/19/16) if you want to feel the merchandise before you buy. All the modular connectors are flat.

For prototyping on perfboards, consider a 0.1" header.


Creative Commons License
keybrd tutorial by Wolfram Volpi is licensed under a Creative Commons Attribution 4.0 International License.
Permissions beyond the scope of this license may be available at https://github.com/wolfv6/keybrd/issues/new.