82 lines
4.6 KiB
Markdown
82 lines
4.6 KiB
Markdown
Tutorial 6 - Active high
|
|
=========================
|
|
This tutorial pulls together several concepts needed to understand active state in the context of a keyboard.
|
|
Skip to the end of this tutorial if you just want to copy an active-high keyboard.
|
|
|
|
Pull-up resistors
|
|
-----------------
|
|
There are many sources that explain "pull-up resistors", so I won't repeat it here.
|
|
Here is a [good tutorial on Pull-up Resistors](https://learn.sparkfun.com/tutorials/pull-up-resistors/what-is-a-pull-up-resistor).
|
|
|
|
Active low
|
|
----------
|
|
All the keyboards up to this point in the tutorial series have used active low with internal pull-up resistors.
|
|
|
|
"Active low" means that if a switch is pressed (active state), the read pin is low.
|
|
When the switch is released (inactive state), the pull-up resistor pulls the read pin high.
|
|
|
|
The following table traces the strobe current from left to right (0 is ground, 1 is power).
|
|
If the switch is closed, the strobe current passes through the switch and pulls the read pin low.
|
|
If the switch is open, the pull-up resistor pulls the read pin high.
|
|
<br>
|
|
|
|
|Strobe pin on | Diode orientation | Switch position | Pull resistor | Read pin state |
|
|
|:------------:|:------------------:|:---------------:|:-------------:|:---------------:|
|
|
| 0 | cathode -:<- anode | close | 1 pull-up | 0 active low |
|
|
| 0 | cathode -:<- anode | open | 1 pull-up | 1 inactive high |
|
|
<br>
|
|
Arduino boards have internal pull-up resistors, which saves on parts and labor compared to manually adding external pull resistors.
|
|
|
|
To make a keyboard active low:
|
|
* Orient diodes with cathode (banded end) towards the write pins (row)
|
|
* Define strobe on and strobe off in the sketch like this:
|
|
```
|
|
const bool Scanner_uC::STROBE_ON = LOW;
|
|
const bool Scanner_uC::STROBE_OFF = HIGH;
|
|
```
|
|
|
|
Active high
|
|
-----------
|
|
"Active high" means that if a switch is pressed (active), the read pin is high.
|
|
When the switch is released (inactive), the pull-down resistor pulls the read pin low.
|
|
|
|
The following table traces the strobe current from left to right (0 is ground, 1 is power).
|
|
If the switch is closed, the strobe current passes through the switch and pulls the read pin high.
|
|
If the switch is open, the pull-down resistor pulls the read pin low.
|
|
<br>
|
|
|
|
|Strobe pin on | Diode orientation | Switch position | Pull resistor | Read pin state |
|
|
|:------------:|:------------------:|:---------------:|:-------------:|:---------------:|
|
|
| 1 | anode ->:- cathode | close | 0 pull-down | 1 active high |
|
|
| 1 | anode ->:- cathode | open | 0 pull-down | 0 inactive low |
|
|
<br>
|
|
Arduino boards do not have internal pull-down resistors.
|
|
If you want to use active low, you will have to add external pull-down resistors to the read pins.
|
|
|
|
To make a keyboard active high:
|
|
* Add an external 10k pull-down resistor to each read pin
|
|
* Orient diodes with cathode (banded end) towards the read pins
|
|
* Define strobe on and off in the sketch like this:
|
|
```
|
|
const bool Scanner_uC::STROBE_ON = HIGH;
|
|
const bool Scanner_uC::STROBE_OFF = LOW;
|
|
```
|
|
|
|
Making a breadboard keyboard active-high
|
|
----------------------------------------
|
|
This tutorial converts the basic breadboard keyboard from tutorial 1 to active high.
|
|
By comparing the above tables, one can see what changes need to be made:
|
|
* add external pull-down resistors to the read pins
|
|
* flip the diodes so that the cathode (banded end) are towards the read pins
|
|
* swap the STROBE_ON and STROBE_OFF values
|
|
|
|
The red bus is grounded.
|
|
The pull-down resistors plug into the red bus and column read pins.
|
|
|
|
The [keybrd_6_active_highsketch.ino](keybrd_6_active_high/keybrd_6_active_high.ino) is the tutorial 1 sketch with STROBE_ON and STROBE_OFF values swapped.
|
|
|
|
|
|
|
|
<br>
|
|
<a rel="license" href="https://creativecommons.org/licenses/by/4.0/"><img alt="Creative Commons License" style="border-width:0" src="https://licensebuttons.net/l/by/4.0/88x31.png" /></a><br /><span xmlns:dct="http://purl.org/dc/terms/" property="dct:title">keybrd tutorial</span> by <a xmlns:cc="https://creativecommons.org/ns" href="https://github.com/wolfv6/keybrd" property="cc:attributionName" rel="cc:attributionURL">Wolfram Volpi</a> is licensed under a <a rel="license" href="https://creativecommons.org/licenses/by/4.0/">Creative Commons Attribution 4.0 International License</a>.<br />Permissions beyond the scope of this license may be available at <a xmlns:cc="https://creativecommons.org/ns" href="https://github.com/wolfv6/keybrd/issues/new" rel="cc:morePermissions">https://github.com/wolfv6/keybrd/issues/new</a>.
|