224 lines
10 KiB
Markdown
224 lines
10 KiB
Markdown
keybrd Library User's Guide
|
|
===========================
|
|
keybrd is an open source library for creating custom-keyboard firmware.
|
|
The resulting keyboard firmware is compatible with standard USB keyboard drivers.
|
|
|
|
This guide shows how to
|
|
* set up the Arduino development environment
|
|
* install the keybrd library
|
|
* compile and load keybrd firmware
|
|
|
|
The Arduino development environment is free and simple as possible.
|
|
Its easy for novice programmers to setup and learn.
|
|
|
|
## Who this guide is for
|
|
This guide is for anyone who wants to use the keybrd library to develop custom-keyboard firmware.
|
|
|
|
A reader with programming experience, but no C++ experience, would understand the tutorials well enough to modify existing keybrd sketches.
|
|
An experienced C++ programmer would be able to write original sketches and classes.
|
|
|
|
The library is written in the C++ language and uses pointers, objects, classes, static class variables, composition, inheritance, and enum.
|
|
|
|
## Microcontroller board requirements
|
|
The keybrd library works with Teensy and Arduino boards.
|
|
|
|
[Teensy LC](https://www.pjrc.com/teensy/teensyLC.html) has 8K RAM, which is more than enough memory for any keyboard.
|
|
|
|
keybrd has been tested on the DodoHand keyboard with Teensy 2.0 and PCA9655E I/O expander using the keybrd_DH sketch.
|
|
|
|
Teensy LC is preferred over the older Teensy 2.0 for it's larger memory capacity and lower price.
|
|
|
|
## Getting started with Teensy, Arduino IDE, and keybrd
|
|
The Arduino IDE is used to edit and compile sketches, and then load them on to the microcontroller.
|
|
|
|
Teensyduino is a software add-on for the Arduino IDE that allows it to compile to Teensy.
|
|
|
|
[Teensy Getting Started](http://www.pjrc.com/teensy/first_use.html) is a good way to familiarize yourself with Teensy.
|
|
[Arduino Development Environment](http://arduino.cc/en/guide/Environment) is a brief description.
|
|
|
|
The following install and setup steps create an Arduino development environment for keybrd sketches.
|
|
|
|
### Install Arduino IDE and Teensyduino
|
|
Following install steps are modified from the [Teensyduino download page](https://www.pjrc.com/teensy/td_download.html)
|
|
|
|
For Linux:
|
|
|
|
1. Download and extract the Arduino software.
|
|
Move the extracted directory to /opt:
|
|
|
|
$ sudo mv ~/Downloads/arduino-1.6.7 /opt/arduino-1.6.7
|
|
|
|
2. The "Linux udev rules" link is at top right of page.
|
|
Save the teensy.rules file in /etc/udev/rules.d/
|
|
|
|
3. "Teensyduino Files" installer links are at top of page.
|
|
Download the installer to your Downloads directory.
|
|
Make the installer executable:
|
|
|
|
$ chmod 755 teensyduino.64bit
|
|
|
|
Run the teensyduino installer and fill the form fields:
|
|
|
|
Arduino location to install Teensyduino: /usr/local/bin/arduino-1.x.x
|
|
Libraries to Install: None
|
|
|
|
4. Launch Arduino IDE from /opt/arduino-1.x.x/arduino
|
|
|
|
### Download and unpack keybrd-master.zip into your Arduino directory
|
|
<--! todo update after testing Arduino library manager
|
|
link from tutorial 7 ## Publishing
|
|
https://www.arduino.cc/en/Guide/Libraries
|
|
> Installing Additional Arduino Libraries
|
|
> Using the Library Manager
|
|
-->
|
|
Down load keybrd-master.zip from the [Download ZIP](https://github.com/wolfv6/keybrd) button.
|
|
|
|
Unpack keybrd-master.zip into your Arduino directory on your system (default location is ~/Documents/Arduino/).
|
|
|
|
### keybrd library and keybrd extension libraries
|
|
<--! todo update after testing Arduino library manager -->
|
|
|
|
The keybrd library contains the foundation classes for creating a keyboard firmware.
|
|
For emphasis, it is referred to as the "core keybrd library".
|
|
|
|
keybrd extension libraries contain additional classes that extend the keyboard library.
|
|
keybrd extension library names are prefixed with "keybrd_".
|
|
|
|
The Arduino IDE looks for libraries in Arduino/libraries/.
|
|
For example, the DodoHand keyboard requires that the core keybrd library and the keybrd_DH extension library be installed:
|
|
* Arduino/libraries/keybrd/
|
|
* Arduino/libraries/keybrd_DH/
|
|
|
|
A keybrd extension library allows classes to be shared by multiple sketches without polluting the core keybrd library with classes that few other keyboards can use.
|
|
|
|
### Setup Arduino IDE for compiling keybrd firmware
|
|
From the Arduino IDE tool bar, select:
|
|
* Tools > Board > Teensy LC (or whatever board you are using)
|
|
* Tools > USB Type > Keyboard + Mouse + Joystick
|
|
|
|
These are optional:
|
|
* File > Preferences > Compiler warnings: All
|
|
* File > Preferences > check: Use external editor
|
|
|
|
A Sketchbook is a folder that the Arduino IDE uses to store sketches and libraries.
|
|
The default location for [Arduino libraries](https://www.arduino.cc/en/Guide/Libraries) is in
|
|
|
|
~/Documents/Arduino/libraries/
|
|
|
|
### Compile and load keybrd sketch
|
|
If it isn't already plugged in, plug the USB cable into the computer and controller.
|
|
|
|
> CAUTION: It is possible to loose control of your keyboard when running a keybrd sketch.
|
|
> If the keybrd sketch has a mouse object, it is also possible to loose control of your mouse.
|
|
> USB keyboard protocol is capable of spewing characters and mouse commands at up to 500 per second.
|
|
> Take the following precautions before uploading an untested keybrd sketch to a controller:
|
|
> * Save all files and close dangerous applications.
|
|
> * Park the cursor in an editor opened to a test file.
|
|
> That way you can immediately see if the controller starts spewing characters.
|
|
> * Be prepared to turn off the controller:
|
|
> turn off Teensy Loader's green "Auto" button and push Teensy's reset button
|
|
> if that fails, unplug Teensy USB
|
|
|
|
Compile and load workflow:
|
|
|
|
1. Open a keybrd sketch in the Arduino IDE.
|
|
2. Prepare for loosing control of keyboard and mouse.
|
|
3. On the Arduino IDE, click the Upload button.
|
|
4. The Teensy boot loader window opens;
|
|
you might need to press and release the pushbutton on the Teensy circuit board.
|
|
|
|
## Example keybrd sketches
|
|
Example keybrd sketches are in the [examples](../examples/) directory.
|
|
Extension libraries have their example sketches similarly located.
|
|
|
|
The example sketch names use the following conventions.
|
|
|
|
**keybrd_extension_feature_version.ino**
|
|
|
|
where
|
|
* **keybrd_extension** is the extension library name e.g. keybrd_DH
|
|
* **feature** is distinguishing feature of keybrd sketch e.g. breadboard, LED, sound, Dvorak
|
|
* **version** is version number
|
|
|
|
The first two fields are mandatory, the remaining fields are optional.
|
|
|
|
## Diode orientation
|
|
The physical martix rows and columns on a keyboard can be in any direction or shape.
|
|
[diode](https://en.wikipedia.org/wiki/Diode) orientation is specified in [Matrix.h](https://github.com/wolfv6/keybrd/blob/master/src/Matrix.h)
|
|
|
|
[Diode](../tutorials/images/120px-Diode_pinout_en_fr.svg.png)
|
|
|
|
Diagram is of typical through-the-hole diode in same alignment as diode symbol.
|
|
Cross bar and band depict the cathode.
|
|
|
|
## Troubleshooting check list
|
|
The following is a listing of items to check when a new keybrd sketch or keyboard is having trouble.
|
|
|
|
Development-environment items to check:
|
|
* If the keyboard has an I/O expander, power cycle (replug the USB) after loading the HEX file.
|
|
* If compile error: 'KEY_A' was not declared in this scope
|
|
|
|
From the Arduino IDE tool bar, select: Tools > USB Type > Keyboard + Mouse + Joystick
|
|
|
|
Sketch items to check:
|
|
* For each row, number of keys in Row should equal number of colPort pins.
|
|
In this example, row_0 has six colPort pins in ptrsColPorts, and six keys in ptrsKeys_0:
|
|
```
|
|
ColPort_AVR colPortB(DDRB, PORTB, PINB, 1<<0 | 1<<1 | 1<<2 | 1<<3 );
|
|
ColPort_AVR colPortD(DDRD, PORTD, PIND, 1<<2 | 1<<3 );
|
|
|
|
ColPort* const ptrsColPorts[] = { &colPortB, &colPortD };
|
|
const uint8_t COL_PORT_COUNT = sizeof(ptrsColPorts)/sizeof(*ptrsColPorts);
|
|
|
|
const Key* const ptrsKeys_0[] = { &k_00, &k_01, &k_02, &k_03, &k_04, &k_05 };
|
|
Row row_0(ptrsKeys_0, &rowPortF, 1<<0, ptrsColPorts, COL_PORT_COUNT);
|
|
```
|
|
* Some of the constructors take array-element-count arguments, make sure that the correct counts are passed to the constructors. Or use sizeof() like this example:
|
|
```
|
|
Row* const ptrsRows[] = { &row0, &row1, &row2, &row3 };
|
|
const uint8_t ROW_COUNT = sizeof(ptrsRows)/sizeof(*ptrsRows);
|
|
Matrix matrix(ptrsRows, ROW_COUNT, 1);
|
|
```
|
|
* For multi-layered keyboards, the number of codes in each Key_Layered should equal the number of layers.
|
|
|
|
Hardware items to check:
|
|
* Connections
|
|
* Diode orientation
|
|
* 5 volts across power and ground
|
|
* To validate keyboard hardware, modify the simple single-layer keybrd sketch from the tutorial.
|
|
<!-- todo after teensy LC bb, linke to minimal keybrd sketch
|
|
[minimal keybrd sketch](blob/master/tutorials/keybrd_2_single-layer_annotated/keybrd_2_single-layer_annotated.ino).
|
|
-->
|
|
|
|
## Keybrd nomenclature
|
|
**[scancode](http://en.wikipedia.org/wiki/Scancode)** -
|
|
Is a 16-bit integer assigned to a key position on a keyboard.
|
|
The keyboard sends a scancode to the computer for every key press and release.
|
|
|
|
**[Layers](http://deskthority.net/wiki/Layer)** -
|
|
are key bindings provided by the keyboard firmware.
|
|
The standard [IBM PC keyboard](http://en.wikipedia.org/wiki/IBM_PC_keyboard) has one layer.
|
|
Many compact keyboards have an additional [Fn layer](http://en.wikipedia.org/wiki/Fn_key).
|
|
The [Neo layout](http://neo-layout.org/index_en.html) has 6 layers.
|
|
|
|
**Layer code** - is an integer assigned to a layer.
|
|
|
|
**Layer scheme** - is a system for changing layers while typing.
|
|
A single-layer scheme does not change layers.
|
|
|
|
**Layout** - is a grid of keys. Key caps are often labeled to show a keyboard's layout.
|
|
|
|
**[Matrix](http://pcbheaven.com/wikipages/How_Key_Matrices_Works/)** - is a collection of switches connected by rows and columns.
|
|
|
|
**[Bounce](http://en.wikipedia.org/wiki/Switch#Contact_bounce)** -
|
|
Keyboard switches are made of moving contacts.
|
|
When the contacts close, they bounce apart one or more times before making steady contact.
|
|
A debouncer removes the bounce so that a key press is sent to the computer only once.
|
|
|
|
**[Modifier key](http://en.wikipedia.org/wiki/Modifier_key)** - is a special key on a computer keyboard that temporarily modifies the normal action of another key when pressed together e.g. Shift, Alt, or Ctrl.
|
|
By themselves, modifier keys usually do nothing; that is, pressing any of the Shift, Alt, or Ctrl keys alone does not trigger any action from the computer.
|
|
|
|
**Sketch** - is the name that Arduino uses for a program
|
|
|
|
**keybrd sketch** - is an Arduino sketch that uses the keybrd library to define a keyboard firmware.
|