di0ib
/
tmk_keyboard
Observar 1
Favorito 0
Fork 0
Código Versões 4 Atividade
Keyboard firmwares for Atmel AVR and Cortex-M
Você não pode selecionar mais de 25 tópicos Os tópicos devem começar com uma letra ou um número, podem incluir traços ('-') e podem ter até 35 caracteres.
1431 Commits
3 Branches
Branch: master
Branches Tags
${ item.name }
Criar branch ${ searchTerm }
de master
${ noResults }
tmk_keyboard/converter/xt_usb
tmk 1ad31539a6 Fix matrix.c to use new default impl. 7 anos atrás
..
Makefile Fix Makefile for NKRO comment 7 anos atrás
README.md Update XT converter readme. 8 anos atrás
config.h Update config.h 8 anos atrás
keymap_common.h Remove keymap read code from project directories 7 anos atrás
keymap_jis.c Remove keymap read code from project directories 7 anos atrás
keymap_plain.c Remove keymap read code from project directories 7 anos atrás
keymap_spacefn.c Remove keymap read code from project directories 7 anos atrás
led.c Codes appear to be detected correctly, the break codes are broken. 8 anos atrás
matrix.c Fix matrix.c to use new default impl. 7 anos atrás

README.md

XT to USB keyboard converter

This firmware converts XT keyboard protocol to USB.(It supports Scan Code Set 1.)

Connect Wires

In case of Teensy2.0(ATMega32U4):

  1. Connect Vcc and GND.
  2. Connect Clock and Data line.
    • Interrupt: Clock is on PD1 and Data on PD0.(Recommended. Soarer’s converter compatible)
  3. Optionally you need pull-up resistor. 1K-10K Ohm is OK.

To change pin configuration edit config.h and Makefile.

Build Firmware

For PJRC Teensy just run make:

$ make clean
$ make

To select keymap:

$ make clean
$ make KEYMAP=[plain|jis|spacefn|...]

After that you will find HEX file xt_usb_lufa.hex in current directory.

Keymap

Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named keymap_<name>.c and see keymap document(you can find in README.md of top directory) and existent keymap files.