di0ib
/
tmk_keyboard
Bevaka 1
Stjärnmärk 0
Förgrening 0
Kod Släpp 4 Aktiviteter
Keyboard firmwares for Atmel AVR and Cortex-M
Du kan inte välja fler än 25 ämnen Ämnen måste starta med en bokstav eller siffra, kan innehålla bindestreck ('-') och vara max 35 tecken långa.
1431 Incheckningar
3 Grenar
Gren: master
Grenar Taggar
${ item.name }
Skapa branchen ${ searchTerm }
från 'master'
${ noResults }
tmk_keyboard/converter/xt_usb
tmk 1ad31539a6 Fix matrix.c to use new default impl. 7 år sedan
..
Makefile Fix Makefile for NKRO comment 7 år sedan
README.md Update XT converter readme. 8 år sedan
config.h Update config.h 8 år sedan
keymap_common.h Remove keymap read code from project directories 7 år sedan
keymap_jis.c Remove keymap read code from project directories 7 år sedan
keymap_plain.c Remove keymap read code from project directories 7 år sedan
keymap_spacefn.c Remove keymap read code from project directories 7 år sedan
led.c Codes appear to be detected correctly, the break codes are broken. 8 år sedan
matrix.c Fix matrix.c to use new default impl. 7 år sedan

README.md

XT to USB keyboard converter

This firmware converts XT keyboard protocol to USB.(It supports Scan Code Set 1.)

Connect Wires

In case of Teensy2.0(ATMega32U4):

  1. Connect Vcc and GND.
  2. Connect Clock and Data line.
    • Interrupt: Clock is on PD1 and Data on PD0.(Recommended. Soarer’s converter compatible)
  3. Optionally you need pull-up resistor. 1K-10K Ohm is OK.

To change pin configuration edit config.h and Makefile.

Build Firmware

For PJRC Teensy just run make:

$ make clean
$ make

To select keymap:

$ make clean
$ make KEYMAP=[plain|jis|spacefn|...]

After that you will find HEX file xt_usb_lufa.hex in current directory.

Keymap

Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named keymap_<name>.c and see keymap document(you can find in README.md of top directory) and existent keymap files.