di0ib
/
tmk_keyboard
關注 1
收藏 0
複製 0
程式碼 版本發佈 4 活動
Keyboard firmwares for Atmel AVR and Cortex-M
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1431 提交
3 分支
分支: master
分支列表 標籤
${ item.name }
建立分支 ${ searchTerm }
從 'master'
${ noResults }
tmk_keyboard/converter/xt_usb
tmk 1ad31539a6 Fix matrix.c to use new default impl. 7 年之前
..
Makefile Fix Makefile for NKRO comment 7 年之前
README.md Update XT converter readme. 8 年之前
config.h Update config.h 8 年之前
keymap_common.h Remove keymap read code from project directories 7 年之前
keymap_jis.c Remove keymap read code from project directories 7 年之前
keymap_plain.c Remove keymap read code from project directories 7 年之前
keymap_spacefn.c Remove keymap read code from project directories 7 年之前
led.c Codes appear to be detected correctly, the break codes are broken. 8 年之前
matrix.c Fix matrix.c to use new default impl. 7 年之前

README.md

XT to USB keyboard converter

This firmware converts XT keyboard protocol to USB.(It supports Scan Code Set 1.)

Connect Wires

In case of Teensy2.0(ATMega32U4):

  1. Connect Vcc and GND.
  2. Connect Clock and Data line.
    • Interrupt: Clock is on PD1 and Data on PD0.(Recommended. Soarer’s converter compatible)
  3. Optionally you need pull-up resistor. 1K-10K Ohm is OK.

To change pin configuration edit config.h and Makefile.

Build Firmware

For PJRC Teensy just run make:

$ make clean
$ make

To select keymap:

$ make clean
$ make KEYMAP=[plain|jis|spacefn|...]

After that you will find HEX file xt_usb_lufa.hex in current directory.

Keymap

Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named keymap_<name>.c and see keymap document(you can find in README.md of top directory) and existent keymap files.