You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
This repo is archived. You can view files and clone it, but cannot push or open issues/pull-requests.
tmk 3c109203c3 x68k_usb: Add toggle LED sample 6 years ago
..
Makefile x68k_usb: Convert legacy keymap into current one 6 years ago
README Spellchecking converter README files. 8 years ago
config.h x68k_usb: Convert legacy keymap into current one 6 years ago
keymap.c x68k_usb: Add toggle LED sample 6 years ago
led.c Use serial_uart.c instead of x68k.c now 9 years ago
matrix.c Use serial_uart.c instead of x68k.c now 9 years ago

README

X68000 to USB keyboard protocol converter
=========================================
SHARP X68000 is a hobby computer released in Japan.(1987-93)
http://en.wikipedia.org/wiki/Sharp_X68000

X68000 keyboard has ALPS linear switches.
- DSETK0016CE01 green linear
- DSETK0022CE02 yellow linear
- DSETK0023CE03 yellow linear


Hardware
--------
Target MCU is ATMega32u4 but other USB capable AVR will also work.
You can use PJRC Teensy as development board.
http://www.pjrc.com/teensy/

Wiring:
Mini-DIN Teensy
-----------------------------------------------------
pin1 +5V VCC
pin2 MOUSE -
pin3 RXD PD2(RXD)
pin4 TXD PD3(TXD) NOTE: Not supported yet.
pin5 READY -
pin6 REMOTE -
pin7 GND GND


Firmware
--------
Build:
$ cd x68k_usb
$ make

And load the binary to MCU with your favorite programmer.
If you use Teensy you can load with PJRC Teensy Loader tool.
http://www.pjrc.com/teensy/loader.html


* * * * * * * * * * * * * * * * * *


X68000 Keyboard Protocol
========================
http://kyoutan.jpn.org/uts/pc/pic/x68key/


Connector
---------
Mini DIN 7pin(female connector on computer side)
7 6 5
o o o
4 o = o 3
o o
2 1

Mini-DIN
-------------
pin1 +5V
pin2 MOUSE
pin3 RXD
pin4 TXD
pin5 READY
pin6 REMOTE
pin7 GND


Signaling
---------
- TXD,RXD
Asynchronous, 2400baud, 1-startbit(L), 8-databit, 1-stopbit(H)

- READY
ready/not ready(1/0)


Data from keyboard
------------------
bit 7 make/break flag(0/1)
bit 6-0 following scan code


Data from computer
------------------
- LED control ON/OFF(0/1)
bit 7 1(fixed)
bit 6 全角
bit 5 ひらがな
bit 4 INS
bit 3 CAPS
bit 2 コード入力
bit 1 ローマ字
bit 0 かな

- Repeat delay
bit 7 0(fixed)
bit 6 1(fixed)
bit 5 1(fixed)
bit 4 0(fixed)
bit 3-0 delay
REPEAT_DELAY = 200+delay*100 ms
default: 500ms

- Repeat time
bit 7 0(fixed)
bit 6 1(fixed)
bit 5 1(fixed)
bit 4 1(fixed)
bit 3-0 time
REPEAT_TIME = 30+time^2*5 ms
default: 110ms


Scan Codes
----------
,---. ,---. ,-------------------, ,-------------------. ,-----------. ,---------------.
| 61| | 62| | 63| 64| 65| 66| 67| | 68| 69| 6A| 6B| 6C| | 5A| 5B| 5C| | 5D| 52| 53| 54|
`---' `---' `-------------------' `-------------------' `-----------' `---------------'
,-----------------------------------------------------------. ,-----------. ,---------------.
| 01| 02| 03| 04| 05| 06| 07| 08| 09| 0A| 0B| 0C| 0D| 0E| 0F| | 36| 5E| 37| | 3F| 40| 41| 42|
|-----------------------------------------------------------| |------------ |---------------|
| 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1A| 1B| 1C| | | 38| 39| 3A| | 43| 44| 45| 46|
|------------------------------------------------------. 1D | `---=====---' |---------------|
| 71 | 1E| 1F| 20| 21| 2l| 23| 24| 25| 26| 27| 28| 29| | ___| 3C|___ | 47| 48| 49| 4A|
|-----------------------------------------------------------| | 3B|---| 3D| |-----------|---|
| 70 | 2A| 2B| 2C| 2D| 2E| 2F| 30| 31| 32| 33| 34| 70 | `---| 3E|---' | 4B| 4C| 4D| |
`-----------------------------------------------------------| .---=====---. |-----------| 4E|
| 5F| 55 | 56 | 35 | 57 | 58 | 59 | 60| | 72 | 73 | | 4F| 50| 51| |
`---------------------------------------------' `-----------' `---------------'



LED Special Functions
---------------------
http://homepage2.nifty.com/m_kamada/docs/unlistedx68k.htm#keyboard

1. Random Illumination
Plug in with pressing F1, F2 and F3.

2. Sequential Illumination
Plug in with pressing 記号入力(52), 登録(53) and HELP.

3. Scan code Display
Plug in with pressing かな(5A), ローマ字(5B) and コード入力(5C).
You can see its scan code on LEDs by pressing a key.
+---------------------------------------------------+
|bit|6 |5 |4 |3 |2 |1 |0 |
|---+----+--------+---+----+----------+--------+----|
|LED|全角|ひらがな|INS|CAPS|コード入力|ローマ字|かな|
+---------------------------------------------------+