di0ib/controller
Archived
1
0
Fork 0
Code Releases Activity

Major USB update, fixes most (if not all) known issues

Browse Source 
USB - General
- Refactored descriptors
- Enabled/Disable USB endpoints
- Added debug flags for special features
- Code cleanup
- Interface count calculation based off of enabled endpoints
- Delayed wTotalLength calculation to simplify descriptor offsets
- Re-ordered endpoints and interfaces
- Added more debug output
- Added usbInitTime to show how long keyboard initialization took
  (Useful when debugging bad init sequences)
- Added function for usb_resume() which takes care of the resume sequence
  * Resume is now only called if packets are starting to timeout

USB - Special Options
- Added enableDeviceRestartOnUSBTimeout
  * A last resort hammer for bad USB Chipsets/OSs, don't use if you can help it
  * Disabled
- Added enableUSBResume
  * Enables host resume wake-up signalling, required to wake a computer from sleep
  * Enabled
- Added enableUSBLowPowerNegotiation
  * Enables power negotiation hack
  * Required to use firmware with an IPad and other hard-limit low-power USB hosts
  * Hasn't been tested with the recent changes
  * Disabled
- Added enableUSBSuspend
  * Enables power down events on host USB bus suspend
  * Enabled

USB - Keyboard
- Attempted to cleanup HID SET_REPORT
  * Works much better
  * Still has an issue under Linux which generates *a lot* of NAKs (initializes quickly regardless)
    + Not present on other keyboards
    + SETUP -> OUT -> IN : This sequence is the problem
    + Specifically during the OUT phase
- Enabled

USB - CDC Virtual Serial Port
- Code cleanup
- Added convenience struct USBCDCLineCoding for easier debugging
- Attempted to cleanup CDC_SET_LING_CODING
  * Works much better
  * Still has an issue under Linux which generates *a lot* of NAKs (initializes quickly regardless)
    + SETUP -> OUT -> IN : This sequence is the problem
    + Specifically during the OUT phase
    + Likely the same issues as HID SET_REPORT
- Enabled

USB - Mouse
- Enabled

USB - Joystick
- Disabled

USB - RawIO
- Initial code, API not used yet
- Disabled

DFU
- Updated load script, now faster
This commit is contained in:
Jacob Alexander 2016-05-31 00:19:45 -07:00
parent 8a96e70b4b
commit 358d480ea9
18 changed files with 1097 additions and 259 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
Debug/print/print.c
View File

@ -1,4 +1,4 @@
/* Copyright (C) 2011-2014 by Jacob Alexander
/* Copyright (C) 2011-2016 by Jacob Alexander
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
@ -127,7 +127,7 @@ void printHex32_op( uint32_t in, uint8_t op )
// With an op of 1, the max number of characters is 6 + 1 for null
// e.g. "0xFFFF\0"
// op 2 and 4 require fewer characters (2+1 and 4+1 respectively)
char tmpStr[7];
char tmpStr[11];
// Convert number
hex32ToStr_op( in, tmpStr, op );
@ -259,6 +259,7 @@ void hex32ToStr_op( uint32_t in, char* out, uint8_t op )
break;
case 2: // 8-bit padding
case 4: // 16-bit padding
case 8: // 32-bit padding
while ( pos < op )
out[pos++] = '0';
break;

23
LoadFile/load.dfu
View File

@ -2,8 +2,9 @@
# Convenience script for loading firmware onto a dfu type device
# By default, initiates dfu-util
SERIAL_PORT=""
AUTO_SCREEN_SESSION=""
SERIAL_PORT="/dev/kiibohd"
AUTO_SCREEN_SESSION="/dev/kiibohd"
NOSCREEN=0
PROG_NAME=$(basename $0)
# Parse all the command line arguments
@ -19,6 +20,10 @@ while (( "$#" >= "1" )); do
SERIAL_PORT="$2"
shift
;;
-n|--noscreen)
NOSCREEN=1
shift
;;
-h|--help)
echo "Usage: $PROG_NAME [options...]"
echo ""
@ -49,12 +54,19 @@ done
if [[ "$SERIAL_PORT" != "" ]] && [[ -e "$SERIAL_PORT" ]]; then
echo "NOTE: This may fail if the uC is in a bad state or does not support remote flashing"
printf "reload\r" > $SERIAL_PORT
sleep 2
fi
# Load via dfu-util
# Used for McHCK based uCs
if type dfu-util &>/dev/null; then
# Wait for device to appear
while true; do
dfu-util -l | grep -q "Kiibohd DFU"
if [ $? -eq 0 ]; then
break
fi
sleep 0.1
done
dfu-util -D @TARGET_BIN@
EXIT_STATUS=$?
else
@ -63,9 +75,12 @@ else
fi
# Load Screen Session if specified
if (( "$EXIT_STATUS" == "0" )) && [[ "$AUTO_SCREEN_SESSION" != "" ]]; then
if (( "$EXIT_STATUS" == "0" )) && [[ "$AUTO_SCREEN_SESSION" != "" ]] && [[ $NOSCREEN -ne 1 ]]; then
if type screen &>/dev/null; then
# Wait for interface
while [ ! -e $AUTO_SCREEN_SESSION ]; do
sleep 0.1
done
screen $AUTO_SCREEN_SESSION
else
echo "screen is not installed"

269
Output/pjrcUSB/arm/usb_desc.c
View File

@ -103,6 +103,7 @@ static uint8_t usb_debug_descriptor[] = {
// the meaning and format of the data.
// Keyboard Protocol 1, HID 1.11 spec, Appendix B, page 59-60
#if enableKeyboard_define == 1
static uint8_t keyboard_report_desc[] = {
// Keyboard Collection
0x05, 0x01, // Usage Page (Generic Desktop),
@ -304,8 +305,11 @@ static uint8_t sys_ctrl_report_desc[] = {
0x81, 0x00, // Input (Data, Array),
0xc0, // End Collection - Consumer Control
};
#endif
// Mouse Protocol 1, HID 1.11 spec, Appendix B, page 59-60, with wheel extension
#if enableMouse_define == 1
static uint8_t mouse_report_desc[] = {
0x05, 0x01, // Usage Page (Generic Desktop)
0x09, 0x02, // Usage (Mouse)
@ -383,8 +387,11 @@ static uint8_t mouse_report_desc[] = {
0xc0, // End Collection - Mouse Logical
0xc0 // End Collection - Mouse Application
};
#endif
// Joystick Protocol, HID 1.11 spec, Apendix D, page 64-65
#if enableJoystick_define == 1
static uint8_t joystick_report_desc[] = {
0x05, 0x01, // Usage Page (Generic Desktop)
0x09, 0x04, // Usage (Joystick)
@ -429,27 +436,68 @@ static uint8_t joystick_report_desc[] = {
0x81, 0x02, // Input (variable,absolute)
0xC0 // End Collection
};
#endif
// ----- USB Configuration -----
// Check for non-selected USB descriptors to update the total interface count
// XXX This must be correct or some OSs/Init sequences will not initialize the keyboard/device
#if enableKeyboard_define != 1
#undef KEYBOARD_INTERFACES
#define KEYBOARD_INTERFACES 0
#endif
#if enableMouse_define != 1
#undef MOUSE_INTERFACES
#define MOUSE_INTERFACES 0
#endif
#if enableJoystick_define != 1
#undef JOYSTICK_INTERFACES
#define JOYSTICK_INTERFACES 0
#endif
#if enableVirtualSerialPort_define != 1
#undef CDC_INTERFACES
#define CDC_INTERFACES 0
#endif
#if enableRawIO_define != 1
#undef RAWIO_INTERFACES
#define RAWIO_INTERFACES 0
#endif
// Determine number of interfaces
#define NUM_INTERFACE (KEYBOARD_INTERFACES + CDC_INTERFACES + MOUSE_INTERFACES + JOYSTICK_INTERFACES + RAWIO_INTERFACES)
// USB Configuration Descriptor. This huge descriptor tells all
// of the devices capbilities.
static uint8_t config_descriptor[CONFIG_DESC_SIZE] = {
static uint8_t config_descriptor[] = {
// --- Configuration ---
// - 9 bytes -
// configuration descriptor, USB spec 9.6.3, page 264-266, Table 9-10
9, // bLength;
2, // bDescriptorType;
LSB(CONFIG_DESC_SIZE), // wTotalLength
MSB(CONFIG_DESC_SIZE),
0xFF, // wTotalLength - XXX Set in usb_init (simplifies defines)
0xFF,
NUM_INTERFACE, // bNumInterfaces
1, // bConfigurationValue
0, // iConfiguration
0xA0, // bmAttributes
250, // bMaxPower - Entry Index 8
//
// --- Keyboard Endpoint Descriptors ---
//
#if enableKeyboard_define == 1
#define KEYBOARD_DESC_TOTAL_OFFSET (KEYBOARD_DESC_SIZE + NKRO_KEYBOARD_DESC_SIZE + SYS_CTRL_DESC_SIZE)
#define NKRO_KEYBOARD_DESC_BASE_OFFSET (KEYBOARD_DESC_BASE_OFFSET + KEYBOARD_DESC_SIZE)
#define SYS_CTRL_DESC_BASE_OFFSET (KEYBOARD_DESC_BASE_OFFSET + KEYBOARD_DESC_SIZE + NKRO_KEYBOARD_DESC_SIZE)
// --- Keyboard HID --- Boot Mode Keyboard Interface
// - 9 bytes -
// interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
@ -512,6 +560,47 @@ static uint8_t config_descriptor[CONFIG_DESC_SIZE] = {
NKRO_KEYBOARD_SIZE, 0, // wMaxPacketSize
NKRO_KEYBOARD_INTERVAL, // bInterval
// --- System/Consumer Control ---
// - 9 bytes -
// interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
9, // bLength
4, // bDescriptorType
SYS_CTRL_INTERFACE, // bInterfaceNumber
0, // bAlternateSetting
1, // bNumEndpoints
0x03, // bInterfaceClass (0x03 = HID)
0x01, // bInterfaceSubClass (0x00 = Non-Boot, 0x01 = Boot)
0x00, // bInterfaceProtocol (0x00 = None)
SYS_CTRL_INTERFACE + 4, // iInterface
// - 9 bytes -
// HID interface descriptor, HID 1.11 spec, section 6.2.1
9, // bLength
0x21, // bDescriptorType
0x11, 0x01, // bcdHID
KeyboardLocale_define, // bCountryCode
1, // bNumDescriptors
0x22, // bDescriptorType
LSB(sizeof(sys_ctrl_report_desc)), // wDescriptorLength
MSB(sizeof(sys_ctrl_report_desc)),
// - 7 bytes -
// endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
7, // bLength
5, // bDescriptorType
SYS_CTRL_ENDPOINT | 0x80, // bEndpointAddress
0x03, // bmAttributes (0x03=intr)
SYS_CTRL_SIZE, 0, // wMaxPacketSize
SYS_CTRL_INTERVAL, // bInterval
#else
#define KEYBOARD_DESC_TOTAL_OFFSET (0)
#endif
//
// --- CDC / Serial Port Endpoint Descriptors ---
//
#if enableVirtualSerialPort_define == 1
#define SERIAL_CDC_DESC_TOTAL_OFFSET (SERIAL_CDC_DESC_SIZE)
// --- Serial CDC --- CDC IAD Descriptor
// - 8 bytes -
// interface association descriptor, USB ECN, Table 9-Z
@ -522,7 +611,7 @@ static uint8_t config_descriptor[CONFIG_DESC_SIZE] = {
0x02, // bFunctionClass
0x02, // bFunctionSubClass
0x01, // bFunctionProtocol
CDC_STATUS_INTERFACE + 4, // iFunction
0, // iFunction (XXX No interface index, don't give string -HaaTa)
// --- Serial CDC --- CDC Data Interface
// - 9 bytes -
@ -597,6 +686,57 @@ static uint8_t config_descriptor[CONFIG_DESC_SIZE] = {
0x02, // bmAttributes (0x02=bulk)
CDC_TX_SIZE, 0, // wMaxPacketSize
0, // bInterval
#else
#define SERIAL_CDC_DESC_TOTAL_OFFSET (0)
#endif
//
// --- Raw IO Endpoint Descriptors ---
//
#if enableRawIO_define == 1
#define RAWIO_DESC_TOTAL_OFFSET (RAWIO_DESC_SIZE)
// --- Vendor Specific / RAW I/O ---
// - 9 bytes -
// interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
9, // bLength
4, // bDescriptorType
RAWIO_INTERFACE, // bInterfaceNumber
0, // bAlternateSetting
2, // bNumEndpoints
0xFF, // bInterfaceClass (0xFF)
0xFF, // bInterfaceSubClass
0xFF, // bInterfaceProtocol
RAWIO_INTERFACE + 4, // iInterface
// - 7 bytes -
// endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
7, // bLength
5, // bDescriptorType
RAWIO_TX_ENDPOINT | 0x80, // bEndpointAddress
0x02, // bmAttributes (0x02=bulk)
RAWIO_TX_SIZE, 0, // wMaxPacketSize
RAWIO_TX_INTERVAL, // bInterval
// - 7 bytes -
// endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
7, // bLength
5, // bDescriptorType
RAWIO_RX_ENDPOINT, // bEndpointAddress
0x02, // bmAttributes (0x02=bulk)
RAWIO_RX_SIZE, 0, // wMaxPacketSize
RAWIO_RX_INTERVAL, // bInterval
#else
#define RAWIO_DESC_TOTAL_OFFSET (0)
#endif
//
// --- Mouse Endpoint Descriptors ---
//
#if enableMouse_define == 1
#define MOUSE_DESC_TOTAL_OFFSET (MOUSE_DESC_SIZE)
// --- Mouse Interface ---
// - 9 bytes -
@ -628,6 +768,16 @@ static uint8_t config_descriptor[CONFIG_DESC_SIZE] = {
0x03, // bmAttributes (0x03=intr)
MOUSE_SIZE, 0, // wMaxPacketSize
MOUSE_INTERVAL, // bInterval
#else
#define MOUSE_DESC_TOTAL_OFFSET (0)
#endif
//
// --- Joystick Endpoint Descriptors ---
//
#if enableJoystick_define == 1
#define JOYSTICK_DESC_TOTAL_OFFSET (JOYSTICK_DESC_SIZE)
// --- Joystick Interface ---
// - 9 bytes -
@ -659,37 +809,10 @@ static uint8_t config_descriptor[CONFIG_DESC_SIZE] = {
0x03, // bmAttributes (0x03=intr)
JOYSTICK_SIZE, 0, // wMaxPacketSize
JOYSTICK_INTERVAL, // bInterval
#else
#define JOYSTICK_DESC_TOTAL_OFFSET (0)
#endif
// --- System/Consumer Control ---
// - 9 bytes -
// interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
9, // bLength
4, // bDescriptorType
SYS_CTRL_INTERFACE, // bInterfaceNumber
0, // bAlternateSetting
1, // bNumEndpoints
0x03, // bInterfaceClass (0x03 = HID)
0x01, // bInterfaceSubClass (0x00 = Non-Boot, 0x01 = Boot)
0x00, // bInterfaceProtocol (0x00 = None)
SYS_CTRL_INTERFACE + 4, // iInterface
// - 9 bytes -
// HID interface descriptor, HID 1.11 spec, section 6.2.1
9, // bLength
0x21, // bDescriptorType
0x11, 0x01, // bcdHID
KeyboardLocale_define, // bCountryCode
1, // bNumDescriptors
0x22, // bDescriptorType
LSB(sizeof(sys_ctrl_report_desc)), // wDescriptorLength
MSB(sizeof(sys_ctrl_report_desc)),
// - 7 bytes -
// endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
7, // bLength
5, // bDescriptorType
SYS_CTRL_ENDPOINT | 0x80, // bEndpointAddress
0x03, // bmAttributes (0x03=intr)
SYS_CTRL_SIZE, 0, // wMaxPacketSize
SYS_CTRL_INTERVAL, // bInterval
};
uint8_t *usb_bMaxPower = &config_descriptor[8];
@ -731,18 +854,37 @@ struct usb_string_descriptor_struct string0 = {
usb_string_descriptor( usb_string_manufacturer_name_default, STR_MANUFACTURER );
usb_string_descriptor( usb_string_product_name_default, STR_PRODUCT );
usb_string_descriptor( usb_string_serial_number_default, STR_SERIAL );
#if enableKeyboard_define == 1
usb_string_descriptor( usb_string_keyboard_name, KEYBOARD_NAME );
usb_string_descriptor( usb_string_nkro_keyboard_name, NKRO_KEYBOARD_NAME );
usb_string_descriptor( usb_string_sys_ctrl_name, SYS_CTRL_NAME );
#endif
#if enableVirtualSerialPort_define == 1
usb_string_descriptor( usb_string_cdc_status_name, CDC_STATUS_NAME );
usb_string_descriptor( usb_string_cdc_data_name, CDC_DATA_NAME );
#endif
#if enableRawIO_define == 1
usb_string_descriptor( usb_string_rawio_name, RAWIO_NAME );
#endif
#if enableMouse_define == 1
usb_string_descriptor( usb_string_mouse_name, MOUSE_NAME );
#endif
#if enableJoystick_define == 1
usb_string_descriptor( usb_string_joystick_name, JOYSTICK_NAME );
usb_string_descriptor( usb_string_sys_ctrl_name, SYS_CTRL_NAME );
#endif
// ----- Descriptors List -----
#define iInterfaceString(num, var) \
{0x0300 + 4 + num, 0x0409, (const uint8_t *)&var, 0 }
// This table provides access to all the descriptor data above.
const usb_descriptor_list_t usb_descriptor_list[] = {
@ -752,38 +894,57 @@ const usb_descriptor_list_t usb_descriptor_list[] = {
{0x0600, 0x0000, device_qualifier_descriptor, sizeof(device_qualifier_descriptor)},
{0x0A00, 0x0000, usb_debug_descriptor, sizeof(usb_debug_descriptor)},
{0x2200, KEYBOARD_INTERFACE, keyboard_report_desc, sizeof(keyboard_report_desc)},
{0x2100, KEYBOARD_INTERFACE, config_descriptor + KEYBOARD_DESC_OFFSET, 9},
{0x2200, NKRO_KEYBOARD_INTERFACE, nkro_keyboard_report_desc, sizeof(nkro_keyboard_report_desc)},
{0x2100, NKRO_KEYBOARD_INTERFACE, config_descriptor + NKRO_KEYBOARD_DESC_OFFSET, 9},
{0x2200, MOUSE_INTERFACE, mouse_report_desc, sizeof(mouse_report_desc)},
{0x2100, MOUSE_INTERFACE, config_descriptor + MOUSE_DESC_OFFSET, 9},
{0x2200, JOYSTICK_INTERFACE, joystick_report_desc, sizeof(joystick_report_desc)},
{0x2100, JOYSTICK_INTERFACE, config_descriptor + JOYSTICK_DESC_OFFSET, 9},
{0x2200, SYS_CTRL_INTERFACE, sys_ctrl_report_desc, sizeof(sys_ctrl_report_desc)},
{0x2100, SYS_CTRL_INTERFACE, config_descriptor + SYS_CTRL_DESC_OFFSET, 9},
#define iInterfaceString(num, var) \
{0x0300 + 4 + num, 0x409, (const uint8_t *)&var, 0 }
{0x0300, 0x0000, (const uint8_t *)&string0, 0},
{0x0301, 0x0409, (const uint8_t *)&usb_string_manufacturer_name, 0},
{0x0302, 0x0409, (const uint8_t *)&usb_string_product_name, 0},
{0x0303, 0x0409, (const uint8_t *)&usb_string_serial_number, 0},
#if enableKeyboard_define == 1
{0x2200, KEYBOARD_INTERFACE, keyboard_report_desc, sizeof(keyboard_report_desc)},
{0x2100, KEYBOARD_INTERFACE, config_descriptor + KEYBOARD_DESC_BASE_OFFSET, 9},
{0x2200, NKRO_KEYBOARD_INTERFACE, nkro_keyboard_report_desc, sizeof(nkro_keyboard_report_desc)},
{0x2100, NKRO_KEYBOARD_INTERFACE, config_descriptor + NKRO_KEYBOARD_DESC_BASE_OFFSET, 9},
{0x2200, SYS_CTRL_INTERFACE, sys_ctrl_report_desc, sizeof(sys_ctrl_report_desc)},
{0x2100, SYS_CTRL_INTERFACE, config_descriptor + SYS_CTRL_DESC_BASE_OFFSET, 9},
iInterfaceString( KEYBOARD_INTERFACE, usb_string_keyboard_name ),
iInterfaceString( NKRO_KEYBOARD_INTERFACE, usb_string_nkro_keyboard_name ),
iInterfaceString( SYS_CTRL_INTERFACE, usb_string_sys_ctrl_name ),
#endif
#if enableVirtualSerialPort_define == 1
iInterfaceString( CDC_STATUS_INTERFACE, usb_string_cdc_status_name ),
iInterfaceString( CDC_DATA_INTERFACE, usb_string_cdc_data_name ),
#endif
#if enableRawIO_define == 1
iInterfaceString( RAWIO_INTERFACE, usb_string_rawio_name ),
#endif
#if enableMouse_define == 1
{0x2200, MOUSE_INTERFACE, mouse_report_desc, sizeof(mouse_report_desc)},
{0x2100, MOUSE_INTERFACE, config_descriptor + MOUSE_DESC_BASE_OFFSET, 9},
iInterfaceString( MOUSE_INTERFACE, usb_string_mouse_name ),
#endif
#if enableJoystick_define == 1
{0x2200, JOYSTICK_INTERFACE, joystick_report_desc, sizeof(joystick_report_desc)},
{0x2100, JOYSTICK_INTERFACE, config_descriptor + JOYSTICK_DESC_BASE_OFFSET, 9},
iInterfaceString( JOYSTICK_INTERFACE, usb_string_joystick_name ),
iInterfaceString( SYS_CTRL_INTERFACE, usb_string_sys_ctrl_name ),
#endif
{0, 0, NULL, 0}
};
// Simplifies defines for USB descriptors
void usb_set_config_descriptor_size()
{
config_descriptor[2] = LSB( sizeof( config_descriptor ) );
config_descriptor[3] = MSB( sizeof( config_descriptor ) );
}
// ----- Endpoint Configuration -----

111
Output/pjrcUSB/arm/usb_desc.h
View File

@ -54,9 +54,18 @@
#define DEVICE_SUBCLASS 0x00
#define DEVICE_PROTOCOL 0x00
#define EP0_SIZE 64
#define NUM_ENDPOINTS 8
#define NUM_ENDPOINTS 10 // XXX Can save some space if this can be calculated using KLL
#define NUM_USB_BUFFERS 30
#define NUM_INTERFACE 7
// XXX Remember to update total interface count, if it isn't correct some OSs will not initialize USB
// Linux warns in dmesg
// Mac OSX login screen will not initialize
#define KEYBOARD_INTERFACES 3 // Boot, NKRO, SysCtrl
#define CDC_INTERFACES 2
#define MOUSE_INTERFACES 1
#define JOYSTICK_INTERFACES 1
#define RAWIO_INTERFACES 1
#define KEYBOARD_INTERFACE 0 // Keyboard
#define KEYBOARD_ENDPOINT 1
@ -70,52 +79,97 @@
#define NKRO_KEYBOARD_INTERVAL 1
#define NKRO_KEYBOARD_NAME L"NKRO Keyboard"
#define SYS_CTRL_INTERFACE 2 // Media Keys
#define SYS_CTRL_ENDPOINT 3
#define SYS_CTRL_SIZE 8
#define SYS_CTRL_INTERVAL 1
#define SYS_CTRL_NAME L"Media Keys"
#define CDC_IAD_DESCRIPTOR 1
#define CDC_STATUS_INTERFACE 2
#define CDC_DATA_INTERFACE 3 // Serial
#define CDC_ACM_ENDPOINT 3
#define CDC_RX_ENDPOINT 4
#define CDC_TX_ENDPOINT 5
#define CDC_STATUS_INTERFACE 3
#define CDC_DATA_INTERFACE 4 // Serial
#define CDC_ACM_ENDPOINT 4
#define CDC_RX_ENDPOINT 5
#define CDC_TX_ENDPOINT 6
#define CDC_ACM_SIZE 16
#define CDC_RX_SIZE 64
#define CDC_TX_SIZE 64
#define CDC_STATUS_NAME L"Virtual Serial Port - Status"
#define CDC_DATA_NAME L"Virtual Serial Port - Data"
#define MOUSE_INTERFACE 4 // Mouse
#define MOUSE_ENDPOINT 6
#define RAWIO_INTERFACE 5 // RawIO
#define RAWIO_TX_ENDPOINT 7
#define RAWIO_TX_SIZE 64
#define RAWIO_TX_INTERVAL 1
#define RAWIO_RX_ENDPOINT 8
#define RAWIO_RX_SIZE 64
#define RAWIO_RX_INTERVAL 1
#define RAWIO_NAME L"API Interface"
#define MOUSE_INTERFACE 6 // Mouse
#define MOUSE_ENDPOINT 9
#define MOUSE_SIZE 8
#define MOUSE_INTERVAL 1
#define MOUSE_NAME L"Mouse"
#define JOYSTICK_INTERFACE 5 // Joystick
#define JOYSTICK_ENDPOINT 7
#define JOYSTICK_INTERFACE 7 // Joystick
#define JOYSTICK_ENDPOINT 10
#define JOYSTICK_SIZE 16
#define JOYSTICK_INTERVAL 1
#define JOYSTICK_NAME L"Joystick"
#define SYS_CTRL_INTERFACE 6 // Media Keys
#define SYS_CTRL_ENDPOINT 8
#define SYS_CTRL_SIZE 8
#define SYS_CTRL_INTERVAL 1
#define SYS_CTRL_NAME L"Media Keys"
#define KEYBOARD_DESC_OFFSET (9 + 9)
#define NKRO_KEYBOARD_DESC_OFFSET (9 + 9+9+7 + 9)
#define SERIAL_CDC_DESC_OFFSET (9 + 9+9+7 + 9+9+7 + 8)
#define MOUSE_DESC_OFFSET (9 + 9+9+7 + 9+9+7 + 8+9+5+5+4+5+7+9+7+7 + 9)
#define JOYSTICK_DESC_OFFSET (9 + 9+9+7 + 9+9+7 + 8+9+5+5+4+5+7+9+7+7 + 9+9+7 + 9)
#define SYS_CTRL_DESC_OFFSET (9 + 9+9+7 + 9+9+7 + 8+9+5+5+4+5+7+9+7+7 + 9+9+7 + 9+9+7 + 9)
#define CONFIG_DESC_SIZE (9 + 9+9+7 + 9+9+7 + 8+9+5+5+4+5+7+9+7+7 + 9+9+7 + 9+9+7 + 9+9+7)
// Descriptor sizes
#define BASE_DESC_SIZE (9)
#define KEYBOARD_DESC_SIZE (9+9+7)
#define NKRO_KEYBOARD_DESC_SIZE (9+9+7)
#define SYS_CTRL_DESC_SIZE (9+9+7)
#define SERIAL_CDC_DESC_SIZE (8+9+5+5+4+5+7+9+7+7)
#define RAWIO_DESC_SIZE (9+7+7)
#define MOUSE_DESC_SIZE (9+9+7)
#define JOYSTICK_DESC_SIZE (9+9+7)
// Descriptor offsets
#define KEYBOARD_DESC_BASE_OFFSET ( \
BASE_DESC_SIZE + \
9 \
)
#define SERIAL_CDC_DESC_BASE_OFFSET ( \
BASE_DESC_SIZE + \
KEYBOARD_DESC_TOTAL_OFFSET + \
8 \
)
#define RAWIO_DESC_BASE_OFFSET ( \
BASE_DESC_SIZE + \
KEYBOARD_DESC_TOTAL_OFFSET + \
SERIAL_CDC_DESC_TOTAL_OFFSET + \
9 \
)
#define MOUSE_DESC_BASE_OFFSET ( \
BASE_DESC_SIZE + \
KEYBOARD_DESC_TOTAL_OFFSET + \
SERIAL_CDC_DESC_TOTAL_OFFSET + \
9 \
)
#define JOYSTICK_DESC_BASE_OFFSET ( \
BASE_DESC_SIZE + \
KEYBOARD_DESC_TOTAL_OFFSET + \
SERIAL_CDC_DESC_TOTAL_OFFSET + \
MOUSE_DESC_TOTAL_OFFSET + \
9 \
)
#define ENDPOINT1_CONFIG ENDPOINT_TRANSIMIT_ONLY
#define ENDPOINT2_CONFIG ENDPOINT_TRANSIMIT_ONLY
#define ENDPOINT3_CONFIG ENDPOINT_TRANSIMIT_ONLY
#define ENDPOINT4_CONFIG ENDPOINT_RECEIVE_ONLY
#define ENDPOINT5_CONFIG ENDPOINT_TRANSIMIT_ONLY
#define ENDPOINT4_CONFIG ENDPOINT_TRANSIMIT_ONLY
#define ENDPOINT5_CONFIG ENDPOINT_RECEIVE_ONLY
#define ENDPOINT6_CONFIG ENDPOINT_TRANSIMIT_ONLY
#define ENDPOINT7_CONFIG ENDPOINT_TRANSIMIT_ONLY
#define ENDPOINT8_CONFIG ENDPOINT_TRANSIMIT_ONLY
#define ENDPOINT8_CONFIG ENDPOINT_RECEIVE_ONLY
#define ENDPOINT9_CONFIG ENDPOINT_TRANSIMIT_ONLY
#define ENDPOINT10_CONFIG ENDPOINT_TRANSIMIT_ONLY
@ -139,3 +193,8 @@ extern const usb_descriptor_list_t usb_descriptor_list[];
extern uint8_t *usb_bMaxPower;
// ----- Functions -----
void usb_set_config_descriptor_size();

279
Output/pjrcUSB/arm/usb_dev.c
View File

@ -40,6 +40,10 @@
#include "usb_dev.h"
#include "usb_mem.h"
#if enableVirtualSerialPort_define == 1
#include "usb_serial.h"
#endif
// ----- Defines -----
@ -180,7 +184,10 @@ static uint8_t usb_dev_sleep = 0;
static void endpoint0_stall()
{
#ifdef UART_DEBUG_UNKNOWN
print("STALL" NL );
print("STALL : ");
printInt32( systick_millis_count - USBInit_TimeStart );
print(" ms");
print(NL);
#endif
USB0_ENDPT0 = USB_ENDPT_EPSTALL | USB_ENDPT_EPRXEN | USB_ENDPT_EPTXEN | USB_ENDPT_EPHSHK;
}
@ -195,7 +202,6 @@ static void endpoint0_transmit( const void *data, uint32_t len )
void usb_reinit()
{
power_neg_delay = 0;
usb_configuration = 0; // Clear USB configuration if we have one
USB0_CONTROL = 0; // Disable D+ Pullup to simulate disconnect
delay(10); // Delay is necessary to simulate disconnect
@ -213,6 +219,18 @@ void usb_device_check()
// Check if 100 ms has elapsed
if ( systick_millis_count - power_neg_time > 100 )
{
power_neg_delay = 0;
// USB Low Power Negotiation
#if enableUSBLowPowerNegotiation_define == 1
// Check to see if bMaxPower has already be lowered
// This generally points to a USB bug (host or device?)
if ( *usb_bMaxPower == 50 )
{
warn_msg("Power negotiation delay detected again, likely a system/device USB bug");
return;
}
// Update bMaxPower
// The value set is in increments of 2 mA
// So 50 * 2 mA = 100 mA
@ -222,6 +240,9 @@ void usb_device_check()
// Re-initialize USB
usb_reinit();
#else
warn_msg("USB Low Power Negotation Disabled, condition detected.");
#endif
}
}
}
@ -237,6 +258,10 @@ static void usb_setup()
const uint8_t *cfg;
int i;
// Reset USB Init timer
USBInit_TimeEnd = systick_millis_count;
USBInit_Ticks++;
// If another request is made, disable the power negotiation check
// See GET_DESCRIPTOR - Configuration
if ( power_neg_delay )
@ -517,22 +542,40 @@ static void usb_setup()
endpoint0_stall();
return;
#if enableVirtualSerialPort_define == 1
case 0x2221: // CDC_SET_CONTROL_LINE_STATE
usb_cdc_line_rtsdtr = setup.wValue;
//serial_print("set control line state\n");
//info_print("set control line state");
goto send;
case 0x21A1: // CDC_GET_LINE_CODING
data = (uint8_t*)usb_cdc_line_coding;
data = (uint8_t*)&usb_cdc_line_coding;
datalen = sizeof( usb_cdc_line_coding );
goto send;
case 0x2021: // CDC_SET_LINE_CODING
// XXX Needed?
//serial_print("set coding, waiting...\n");
return;
// ZLP Reply
// Settings are applied in PID=OUT
goto send;
#endif
case 0x0921: // HID SET_REPORT
// ZLP Reply
// Settings are applied in PID=OUT
#ifdef UART_DEBUG
print("report_type(");
printHex( setup.wValue >> 8 );
print(")report_id(");
printHex( setup.wValue & 0xFF );
print(")interface(");
printHex( setup.wIndex );
print(")len(");
printHex( setup.wLength );
print(")");
print( NL );
#endif
// Interface
switch ( setup.wIndex & 0xFF )
{
@ -547,7 +590,7 @@ static void usb_setup()
printHex( setup.wIndex );
print( NL );
endpoint0_stall();
break;
return;
}
goto send;
@ -596,6 +639,7 @@ static void usb_setup()
print(NL);
#endif
reply_buffer[0] = USBKeys_Idle_Config;
data = reply_buffer;
datalen = 1;
goto send;
@ -620,13 +664,16 @@ static void usb_setup()
print(NL);
#endif
reply_buffer[0] = USBKeys_Protocol;
data = reply_buffer;
datalen = 1;
goto send;
// case 0xC940:
default:
#ifdef UART_DEBUG_UNKNOWN
print("UNKNOWN");
print("UNKNOWN: ");
printInt32( systick_millis_count - USBInit_TimeStart );
print(" ms");
print(NL);
#endif
endpoint0_stall();
@ -717,8 +764,6 @@ static void usb_control( uint32_t stat )
switch ( pid )
{
case 0x0D: // Setup received from host
//serial_print("PID=Setup\n");
//if (count != 8) ; // panic?
// grab the 8 byte setup info
setup.word1 = *(uint32_t *)(buf);
setup.word2 = *(uint32_t *)(buf + 4);
@ -741,14 +786,14 @@ static void usb_control( uint32_t stat )
//}
table[index(0, TX, EVEN)].desc = 0;
table[index(0, TX, ODD)].desc = 0;
// first IN after Setup is always DATA1
ep0_tx_data_toggle = 1;
#ifdef UART_DEBUG_UNKNOWN
print("bmRequestType:");
printHex(setup.bmRequestType);
print(", bRequest:");
printHex(setup.bRequest);
printHex( stat );
print(" PID=SETUP wRequestAndType:");
printHex(setup.wRequestAndType);
print(", wValue:");
printHex(setup.wValue);
print(", wIndex:");
@ -759,8 +804,12 @@ static void usb_control( uint32_t stat )
printHex32(setup.word1);
print(" ");
printHex32(setup.word2);
print(": ");
printInt32( systick_millis_count - USBInit_TimeStart );
print(" ms");
print(NL);
#endif
// actually "do" the setup request
usb_setup();
// unfreeze the USB, now that we're ready
@ -770,6 +819,7 @@ static void usb_control( uint32_t stat )
case 0x01: // OUT transaction received from host
case 0x02:
#ifdef UART_DEBUG_UNKNOWN
printHex( stat );
print(" PID=OUT wRequestAndType:");
printHex(setup.wRequestAndType);
print(", wValue:");
@ -782,43 +832,77 @@ static void usb_control( uint32_t stat )
printHex32(setup.word1);
print(" ");
printHex32(setup.word2);
print(": ");
printInt32( systick_millis_count - USBInit_TimeStart );
print(" ms");
print(NL);
#endif
// CDC Interface
if ( setup.wRequestAndType == 0x2021 /*CDC_SET_LINE_CODING*/ )
#if enableVirtualSerialPort_define == 1
// CDC_SET_LINE_CODING - PID=OUT
// XXX - Getting lots of NAKs in Linux
if ( setup.wRequestAndType == 0x2021 )
{
int i;
uint8_t *dst = (uint8_t *)usb_cdc_line_coding;
//serial_print("set line coding ");
for ( i = 0; i < 7; i++ )
{
//serial_phex(*buf);
*dst++ = *buf++;
}
//serial_phex32(usb_cdc_line_coding[0]);
//serial_print("\n");
if ( usb_cdc_line_coding[0] == 134 )
usb_reboot_timer = 15;
endpoint0_transmit( NULL, 0 );
}
// Copy over new line coding
memcpy( (void*)&usb_cdc_line_coding, buf, 7 );
// Keyboard SET_REPORT
if ( setup.wRequestAndType == 0x921 && setup.wValue & 0x200 )
#ifdef UART_DEBUG
// - Unused, but for the readers info -
print("dwDTERate(");
printInt32( usb_cdc_line_coding.dwDTERate );
print(")bCharFormat(");
printHex( usb_cdc_line_coding.bCharFormat );
print(")bParityType(");
printHex( usb_cdc_line_coding.bParityType );
print(")bDataBits(");
printHex( usb_cdc_line_coding.bDataBits );
print(")");
print( NL );
#endif
// XXX ZLP causes timeout/delay, why? -HaaTa
//endpoint0_transmit( NULL, 0 );
}
#endif
// Keyboard HID SET_REPORT - PID=OUT
#if enableKeyboard_define == 1
// XXX - Getting lots of NAKs in Linux
if ( setup.wRequestAndType == 0x0921 && setup.wValue & 0x200 )
{
#ifdef UART_DEBUG
print("report_type(");
printHex( setup.wValue >> 8 );
print(")report_id(");
printHex( setup.wValue & 0xFF );
print(")interface(");
printHex( setup.wIndex );
print(")len(");
printHex( setup.wLength );
print(")[");
for ( size_t len = 0; len < setup.wLength; len++ )
{
printHex( buf[ len ] );
print(" ");
}
print("]");
print( NL );
#endif
// Interface
switch ( setup.wIndex & 0xFF )
{
// Keyboard Interface
case KEYBOARD_INTERFACE:
USBKeys_LEDs = buf[0];
endpoint0_transmit( NULL, 0 );
break;
// NKRO Keyboard Interface
case NKRO_KEYBOARD_INTERFACE:
// Already set with the control sequence
// Only use 2nd byte, first byte is the report id
USBKeys_LEDs = buf[1];
endpoint0_transmit( NULL, 0 );
break;
default:
warn_msg("Unknown interface - ");
@ -827,33 +911,47 @@ static void usb_control( uint32_t stat )
break;
}
#ifdef UART_DEBUG
for ( size_t len = 0; len < setup.wLength; len++ )
{
printHex( buf[ len ] );
print(" ");
// XXX ZLP causes timeout/delay, why? -HaaTa
//endpoint0_transmit( NULL, 0 );
}
print( NL );
#endif
}
// give the buffer back
b->desc = BDT_DESC( EP0_SIZE, DATA1 );
break;
case 0x09: // IN transaction completed to host
#ifdef UART_DEBUG
print("PID=IN:");
data = ep0_tx_ptr;
#ifdef UART_DEBUG_UNKNOWN
printHex( stat );
print(" PID=IN wRequestAndType:");
printHex(setup.wRequestAndType);
print(", wValue:");
printHex(setup.wValue);
print(", wIndex:");
printHex(setup.wIndex);
print(", len:");
printHex(setup.wLength);
print(" -- ");
printHex32(setup.word1);
print(" ");
printHex32(setup.word2);
print(": ");
printInt32( systick_millis_count - USBInit_TimeStart );
print(" ms");
if ( data ) print(" DATA ");
print(NL);
#endif
// send remaining data, if any...
data = ep0_tx_ptr;
if ( data )
{
size = ep0_tx_len;
if (size > EP0_SIZE) size = EP0_SIZE;
if (size > EP0_SIZE)
{
size = EP0_SIZE;
}
endpoint0_transmit( data, size );
data += size;
ep0_tx_len -= size;
@ -871,12 +969,34 @@ static void usb_control( uint32_t stat )
USB0_ADDR = setup.wValue;
}
// CDC_SET_LINE_CODING - PID=IN
#if enableVirtualSerialPort_define == 1
if ( setup.wRequestAndType == 0x2021 )
{
// XXX ZLP causes timeout/delay, why? -HaaTa
//endpoint0_transmit( NULL, 0 );
}
#endif
// Keyboard HID SET_REPORT - PID=IN
#if enableKeyboard_define == 1
// XXX - Getting lots of NAKs in Linux
if ( setup.wRequestAndType == 0x0921 && setup.wValue & 0x200 )
{
// XXX ZLP causes timeout/delay, why? -HaaTa
//endpoint0_transmit( NULL, 0 );
}
#endif
break;
default:
#ifdef UART_DEBUG
#ifdef UART_DEBUG_UNKNOWN
print("PID=unknown: ");
printHex(pid);
print(": ");
printInt32( systick_millis_count - USBInit_TimeStart );
print(" ms");
print(NL);
#endif
break;
@ -889,14 +1009,25 @@ usb_packet_t *usb_rx( uint32_t endpoint )
//print("USB RX");
usb_packet_t *ret;
endpoint--;
// Make sure this is a valid endpoint
if ( endpoint >= NUM_ENDPOINTS )
{
return NULL;
}
__disable_irq();
// Receive packet, check pointer
ret = rx_first[endpoint];
if ( ret )
{
rx_first[ endpoint ] = ret->next;
usb_rx_byte_count_data[ endpoint ] -= ret->len;
}
__enable_irq();
//serial_print("rx, epidx=");
//serial_phex(endpoint);
//serial_print(", packet=");
@ -994,17 +1125,16 @@ void usb_rx_memory( usb_packet_t *packet )
return;
}
//#define index(endpoint, tx, odd) (((endpoint) << 2) | ((tx) << 1) | (odd))
//#define stat2bufferdescriptor(stat) (table + ((stat) >> 2))
void usb_tx( uint32_t endpoint, usb_packet_t *packet )
// Call whenever there's an action that may wake the host device
void usb_resume()
{
// Update expiry counter
USBKeys_Idle_Expiry = systick_millis_count;
// If we have been sleeping, try to wake up host
if ( usb_dev_sleep )
if ( usb_dev_sleep && usb_configured() )
{
#if enableUSBResume_define == 1
#if enableVirtualSerialPort_define != 1
info_print("Attempting to resume the host");
#endif
// Force wake-up for 10 ms
// According to the USB Spec a device must hold resume for at least 1 ms but no more than 15 ms
USB0_CTL |= USB_CTL_RESUME;
@ -1012,8 +1142,18 @@ void usb_tx( uint32_t endpoint, usb_packet_t *packet )
USB0_CTL &= ~(USB_CTL_RESUME);
delay(50); // Wait for at least 50 ms to make sure the bus is clear
usb_dev_sleep = 0; // Make sure we don't call this again, may crash system
#else
warn_print("Host Resume Disabled");
#endif
}
}
void usb_tx( uint32_t endpoint, usb_packet_t *packet )
{
// Update expiry counter
USBKeys_Idle_Expiry = systick_millis_count;
// Since we are transmitting data, USB will be brought out of sleep/suspend
// if it's in that state
// Use the currently set descriptor value
@ -1087,16 +1227,12 @@ void usb_isr()
{
uint8_t status, stat, t;
//serial_print("isr");
//status = USB0_ISTAT;
//serial_phex(status);
//serial_print("\n");
restart:
status = USB0_ISTAT;
/*
print("USB ISR STATUS: ");
print(" ISR(");
printHex( status );
print( NL );
print(") ");
*/
if ( (status & USB_INTEN_SOFTOKEN /* 04 */ ) )
@ -1112,6 +1248,7 @@ restart:
}
// CDC Interface
#if enableVirtualSerialPort_define == 1
t = usb_cdc_transmit_flush_timer;
if ( t )
{
@ -1119,6 +1256,7 @@ restart:
if ( t == 0 )
usb_serial_flush_callback();
}
#endif
}
USB0_ISTAT = USB_INTEN_SOFTOKEN;
@ -1323,16 +1461,26 @@ restart:
// The USB Module triggers this interrupt when it detects the bus has been idle for 3 ms
if ( (status & USB_ISTAT_SLEEP /* 10 */ ) )
{
//info_print("Host has requested USB sleep/suspend state");
#if enableUSBSuspend_define == 1
// Can cause issues with the virtual serial port
#if enableVirtualSerialPort_define != 1
info_print("Host has requested USB sleep/suspend state");
#endif
Output_update_usb_current( 100 ); // Set to 100 mA
usb_dev_sleep = 1;
#else
info_print("USB Suspend Detected - Firmware USB Suspend Disabled");
#endif
USB0_ISTAT |= USB_ISTAT_SLEEP;
}
// On USB Resume, unset the usb_dev_sleep so we don't keep sending resume signals
if ( (status & USB_ISTAT_RESUME /* 20 */ ) )
{
//info_print("Host has woken-up/resumed from sleep/suspend state");
// Can cause issues with the virtual serial port
#if enableVirtualSerialPort_define != 1
info_print("Host has woken-up/resumed from sleep/suspend state");
#endif
Output_update_usb_current( *usb_bMaxPower * 2 );
usb_dev_sleep = 0;
USB0_ISTAT |= USB_ISTAT_RESUME;
@ -1347,6 +1495,13 @@ uint8_t usb_init()
print("USB INIT"NL);
#endif
USBInit_TimeStart = systick_millis_count;
USBInit_Ticks = 0;
// XXX Set wTotalLength here instead of using defines
// Simplifies defines considerably
usb_set_config_descriptor_size();
// Clear out endpoints table
for ( int i = 0; i <= NUM_ENDPOINTS * 4; i++ )
{

6
Output/pjrcUSB/arm/usb_dev.h
View File

@ -51,10 +51,6 @@ extern volatile uint8_t usb_configuration;
extern uint16_t usb_rx_byte_count_data[NUM_ENDPOINTS];
extern volatile uint8_t usb_cdc_line_coding[7];
extern volatile uint8_t usb_cdc_line_rtsdtr;
extern volatile uint8_t usb_cdc_transmit_flush_timer;
// ----- Functions -----
@ -67,6 +63,8 @@ void usb_isr();
void usb_tx( uint32_t endpoint, usb_packet_t *packet );
void usb_tx_isr( uint32_t endpoint, usb_packet_t *packet );
void usb_resume();
uint32_t usb_tx_byte_count( uint32_t endpoint );
uint32_t usb_tx_packet_count( uint32_t endpoint );

6
Output/pjrcUSB/arm/usb_joystick.c
View File

@ -1,7 +1,7 @@
/* Teensyduino Core Library
* http://www.pjrc.com/teensy/
* Copyright (c) 2013 PJRC.COM, LLC.
* Modified by Jacob Alexander (2015)
* Modified by Jacob Alexander (2015-2016)
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
@ -29,6 +29,8 @@
* SOFTWARE.
*/
#if enableJoystick_define == 1
// ----- Includes -----
// Compiler Includes
@ -112,3 +114,5 @@ int usb_joystick_send()
return 0;
}
#endif

20
Output/pjrcUSB/arm/usb_keyboard.c
View File

@ -1,7 +1,7 @@
/* Teensyduino Core Library
* http://www.pjrc.com/teensy/
* Copyright (c) 2013 PJRC.COM, LLC.
* Modifications by Jacob Alexander 2013-2015
* Modifications by Jacob Alexander 2013-2016
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
@ -29,6 +29,9 @@
* SOFTWARE.
*/
#include <kll_defs.h>
#if enableKeyboard_define == 1
// ----- Includes -----
// Compiler Includes
@ -123,14 +126,25 @@ void usb_keyboard_send()
}
}
// USB Timeout, drop the packet, and potentially try something more drastic to re-enable the bus
if ( ++wait_count > TX_TIMEOUT || transmit_previous_timeout )
{
transmit_previous_timeout = 1;
warn_print("USB Transmit Timeout...restarting device");
USBKeys_Changed = USBKeyChangeState_None; // Indicate packet lost
#if enableDeviceRestartOnUSBTimeout == 1
warn_print("USB Transmit Timeout...restarting device");
usb_device_software_reset();
#else
warn_print("USB Transmit Timeout...auto-restart disabled");
#endif
// Try to wakeup
return;
}
// Try to wake up the device if we can't allocate a packet for some reason
// XXX This is a bit aggressive, but seems to work well. Unfortunately, not as quick as I'd like it -HaaTa
usb_resume();
yield();
}
@ -277,3 +291,5 @@ void usb_keyboard_send()
return;
}
#endif

5
Output/pjrcUSB/arm/usb_mouse.c
View File

@ -29,6 +29,9 @@
* SOFTWARE.
*/
#include <kll_defs.h>
#if enableMouse_define == 1
// ----- Includes -----
// Compiler Includes
@ -300,3 +303,5 @@ void usb_mouse_screen_size(uint16_t width, uint16_t height, uint8_t mac)
}
}
#endif

141
Output/pjrcUSB/arm/usb_rawio.c Normal file
View File

@ -0,0 +1,141 @@
/* Copyright (C) 2016 by Jacob Alexander
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include <kll_defs.h>
#if enableRawIO_define == 1
// ----- Includes -----
// Compiler Includes
#include <string.h> // For memcpy
// Project Includes
#include <Lib/OutputLib.h>
#include <print.h>
// Local Includes
#include "usb_dev.h"
#include "usb_rawio.h"
// ----- Defines -----
// Maximum number of transmit packets to queue so we don't starve other endpoints for memory
#define TX_PACKET_LIMIT 5
// ----- Functions -----
// Check for packets available from host
uint32_t usb_rawio_available()
{
// Error if USB isn't configured
if ( !usb_configuration )
return 0;
// Query number of bytes available from the endpoint
return usb_rx_byte_count( RAWIO_RX_ENDPOINT );
}
// Retrieve packets from host
// Always returns RAWIO_RX_SIZE
int32_t usb_rawio_rx( void *buf, uint32_t timeout )
{
usb_packet_t *rx_packet;
uint32_t begin = millis();
// Read
while ( 1 )
{
// Error if USB isn't configured
if ( !usb_configuration )
return -1;
// Retrieve packet
rx_packet = usb_rx( RAWIO_RX_ENDPOINT );
if ( rx_packet )
break;
// Check for timeout
if ( millis() - begin > timeout || !timeout )
{
warn_msg("RAWIO Rx - Timeout, dropping packet.");
return 0;
}
yield();
}
// Transfer packet from USB buffer to given buffer
memcpy( buf, rx_packet->buf, RAWIO_RX_SIZE );
usb_free( rx_packet );
// Data sent in full packet chunks
return RAWIO_RX_SIZE;
}
// Send packet to host
// XXX Only transfers RAWIO_TX_SIZE on each call (likely 64 bytes)
// Always returns RAWIO_TX_SIZE
int32_t usb_rawio_tx( const void *buf, uint32_t timeout )
{
usb_packet_t *tx_packet;
uint32_t begin = millis();
while ( 1 )
{
// Error if USB isn't configured
if ( !usb_configuration )
return -1;
// Make sure we haven't exceeded the outgoing packet limit
if ( usb_tx_packet_count( RAWIO_TX_ENDPOINT ) < TX_PACKET_LIMIT )
{
// Allocate a packet buffer
tx_packet = usb_malloc();
if ( tx_packet )
break;
}
// Check for timeout
if ( millis() - begin > timeout )
{
warn_msg("RAWIO Tx - Timeout, dropping packet.");
return 0;
}
yield();
}
// Copy input buffer to usb packet buffer and assign length
memcpy( tx_packet->buf, buf, RAWIO_TX_SIZE );
tx_packet->len = RAWIO_TX_SIZE;
// Send USB packet
usb_tx( RAWIO_TX_ENDPOINT, tx_packet );
return RAWIO_TX_SIZE;
}
#endif

35
Output/pjrcUSB/arm/usb_rawio.h Normal file
View File

@ -0,0 +1,35 @@
/* Copyright (C) 2016 by Jacob Alexander
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#pragma once
// ----- Includes -----
#include "usb_desc.h"
// ----- Functions -----
uint32_t usb_rawio_available();
int32_t usb_rawio_rx( void *buf, uint32_t timeout );
int32_t usb_rawio_tx( const void *buf, uint32_t timeout );

19
Output/pjrcUSB/arm/usb_serial.c
View File

@ -1,7 +1,7 @@
/* Teensyduino Core Library
* http://www.pjrc.com/teensy/
* Copyright (c) 2013 PJRC.COM, LLC.
* Modified by Jacob Alexander 2013-2015
* Modified by Jacob Alexander 2013-2016
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
@ -29,6 +29,9 @@
* SOFTWARE.
*/
#include <kll_defs.h>
#if enableVirtualSerialPort_define == 1
// ----- Includes -----
// Compiler Includes
@ -69,9 +72,15 @@
// ----- Variables -----
// serial port settings (baud rate, control signals, etc) set
// by the PC. These are ignored, but kept in RAM.
volatile uint8_t usb_cdc_line_coding[7] = { 0x00, 0xE1, 0x00, 0x00, 0x00, 0x00, 0x08 };
// Serial port settings (baud rate, control signals, etc) set by the host
// These are *ignored*, except to return back to the host if requested
volatile USBCDCLineCoding usb_cdc_line_coding = {
115200,
0,
0,
8,
};
volatile uint8_t usb_cdc_line_rtsdtr = 0;
volatile uint8_t usb_cdc_transmit_flush_timer = 0;
@ -315,3 +324,5 @@ void usb_serial_flush_callback()
}
}
#endif

31
Output/pjrcUSB/arm/usb_serial.h
View File

@ -1,7 +1,7 @@
/* Teensyduino Core Library
* http://www.pjrc.com/teensy/
* Copyright (c) 2013 PJRC.COM, LLC.
* Modifications by Jacob Alexander (2013-2015)
* Modifications by Jacob Alexander (2013-2016)
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
@ -50,9 +50,36 @@
// ----- Structs -----
// See: Universal Serial Bus Class Definitions for Communication Devices 1.11 Table 50
// dwDTERate - Baud Rate : 4 bytes
// bCharFormat - Stop Bits : 1 byte
// 0: 1 stop bit
// 1: 1.5 stop bits
// 2: 2 stop bits
// bParityType - Parity : 1 byte
// 0: None
// 1: Odd
// 2: Even
// 3: Mark
// 4: Space
// bDataBits - Data Bits : 1 byte
// (5,6,7,8 or 16)
//
// Struct is 7 bytes wide
typedef struct USBCDCLineCoding {
uint32_t dwDTERate; // Baud Rate
uint8_t bCharFormat; // Stop Bits
uint8_t bParityType; // Parity
uint8_t bDataBits; // Data Bits
} USBCDCLineCoding;
// ----- Variables -----
extern volatile uint8_t usb_cdc_line_coding[7];
extern volatile USBCDCLineCoding usb_cdc_line_coding;
extern volatile uint8_t usb_cdc_line_rtsdtr;
extern volatile uint8_t usb_cdc_transmit_flush_timer;

63
Output/pjrcUSB/capabilities.kll
View File

@ -4,7 +4,7 @@ Author = "HaaTa (Jacob Alexander) 2014-2016";
KLL = 0.3d;
# Modified Date
Date = 2016-03-21;
Date = 2016-05-31;
# Output capabilities
@ -38,3 +38,64 @@ flashModeEnabled = 0;
flashMode => Output_flashMode_capability();
## USB Compatibility Flags ##
# Some OSs and USB Chipsets have issues with USB features
# These flags are available to provide ways to debug them
# Enable USB Suspend/Low Power mode
# After a period of inactivity, the USB host may request that the device go into low power mode
# This is different than system sleep, though it may occur around the same time
enableUSBSuspend => enableUSBSuspend_define;
enableUSBSuspend = 1;
# Enable Low-power Negotiation
# In order to support low-powered USB hosts, such as an Apple IPad, a low power auto-negotiation scheme has been implemented
# Unfortunately, badly behaved USB Chipsets and OSs may not work correctly with this support enabled
# Typical symptoms:
# * USB constantly re-initializing when first plugging in
enableUSBLowPowerNegotiation => enableUSBLowPowerNegotiation_define;
enableUSBLowPowerNegotiation = 0;
# Enable Device Restart on USB Timeout
# *USE AS LAST RETORT*
# To work around some USB OS, Chipset and Firwmare bugs, an auto-restart mechanism has been implemented
# Depending on the situation, this can be rather aggressive.
# This behaves differently than the Low-power negotiation restart and have very different triggering schemes.
enableDeviceRestartOnUSBTimeout => enableDeviceRestartOnUSBTimeout_define;
enableDeviceRestartOnUSBTimeout = 0;
# Enable Host-Resume (wake-from-sleep)
# On specific actions (such as USB key actions), will trigger the host device to wake if USB is suspended
enableUSBResume => enableUSBResume_define;
enableUSBResume = 1;
## USB Endpoint Configuration ##
# 1 - Enable endpoint
# 0 - Disable endpoint
# Any/all endpoints can be disabled
# But you'll lose functionality for that feature
# Disabling endpoints will save RAM and Flash on the target MCU
# Joystick Endpoint
# *Currently Unused*
enableJoystick => enableJoystick_define;
enableJoystick = 0;
# Mouse Endpoint
enableMouse => enableMouse_define;
enableMouse = 1;
# Keyboard Endpoint
enableKeyboard => enableKeyboard_define;
enableKeyboard = 1;
# CDC / Serial Port Endpoint
enableVirtualSerialPort => enableVirtualSerialPort_define;
enableVirtualSerialPort = 1;
# Raw I/O Endpoint
# *Currently Unused*
enableRawIO => enableRawIO_define;
enableRawIO = 0;

101
Output/pjrcUSB/output_com.c
View File

@ -71,6 +71,7 @@ void cliFunc_readLEDs ( char* args );
void cliFunc_sendKeys ( char* args );
void cliFunc_setKeys ( char* args );
void cliFunc_setMod ( char* args );
void cliFunc_usbInitTime( char* args );
@ -83,6 +84,7 @@ CLIDict_Entry( readLEDs, "Read LED byte:" NL "\t\t1 NumLck, 2 CapsLck, 4 Scrl
CLIDict_Entry( sendKeys, "Send the prepared list of USB codes and modifier byte." );
CLIDict_Entry( setKeys, "Prepare a space separated list of USB codes (decimal). Waits until \033[35msendKeys\033[0m." );
CLIDict_Entry( setMod, "Set the modfier byte:" NL "\t\t1 LCtrl, 2 LShft, 4 LAlt, 8 LGUI, 16 RCtrl, 32 RShft, 64 RAlt, 128 RGUI" );
CLIDict_Entry( usbInitTime, "Displays the time in ms from usb_init() till the last setup call." );
CLIDict_Def( outputCLIDict, "USB Module Commands" ) = {
CLIDict_Item( kbdProtocol ),
@ -91,6 +93,7 @@ CLIDict_Def( outputCLIDict, "USB Module Commands" ) = {
CLIDict_Item( sendKeys ),
CLIDict_Item( setKeys ),
CLIDict_Item( setMod ),
CLIDict_Item( usbInitTime ),
{ 0, 0, 0 } // Null entry for dictionary end
};
@ -162,6 +165,11 @@ uint16_t Output_ExtCurrent_Available = 0;
// Initially 100 mA, but may be negotiated higher (e.g. 500 mA)
uint16_t Output_USBCurrent_Available = 0;
// USB Init Time (ms) - usb_init()
volatile uint32_t USBInit_TimeStart;
volatile uint32_t USBInit_TimeEnd;
volatile uint16_t USBInit_Ticks;
// ----- Capabilities -----
@ -169,6 +177,7 @@ uint16_t Output_USBCurrent_Available = 0;
// Set Boot Keyboard Protocol
void Output_kbdProtocolBoot_capability( uint8_t state, uint8_t stateType, uint8_t *args )
{
#if enableKeyboard_define == 1
// Display capability name
if ( stateType == 0xFF && state == 0xFF )
{
@ -190,12 +199,14 @@ void Output_kbdProtocolBoot_capability( uint8_t state, uint8_t stateType, uint8_
// Set the keyboard protocol to Boot Mode
USBKeys_Protocol = 0;
#endif
}
// Set NKRO Keyboard Protocol
void Output_kbdProtocolNKRO_capability( uint8_t state, uint8_t stateType, uint8_t *args )
{
#if enableKeyboard_define == 1
// Display capability name
if ( stateType == 0xFF && state == 0xFF )
{
@ -217,12 +228,14 @@ void Output_kbdProtocolNKRO_capability( uint8_t state, uint8_t stateType, uint8_
// Set the keyboard protocol to NKRO Mode
USBKeys_Protocol = 1;
#endif
}
// Toggle Keyboard Protocol
void Output_toggleKbdProtocol_capability( uint8_t state, uint8_t stateType, uint8_t *args )
{
#if enableKeyboard_define == 1
// Display capability name
if ( stateType == 0xFF && state == 0xFF )
{
@ -239,12 +252,14 @@ void Output_toggleKbdProtocol_capability( uint8_t state, uint8_t stateType, uint
// Toggle the keyboard protocol Mode
USBKeys_Protocol = !USBKeys_Protocol;
}
#endif
}
// Sends a Consumer Control code to the USB Output buffer
void Output_consCtrlSend_capability( uint8_t state, uint8_t stateType, uint8_t *args )
{
#if enableKeyboard_define == 1
// Display capability name
if ( stateType == 0xFF && state == 0xFF )
{
@ -273,6 +288,7 @@ void Output_consCtrlSend_capability( uint8_t state, uint8_t stateType, uint8_t *
// Set consumer control code
USBKeys_ConsCtrl = *(uint16_t*)(&args[0]);
#endif
}
@ -294,6 +310,7 @@ void Output_noneSend_capability( uint8_t state, uint8_t stateType, uint8_t *args
// Sends a System Control code to the USB Output buffer
void Output_sysCtrlSend_capability( uint8_t state, uint8_t stateType, uint8_t *args )
{
#if enableKeyboard_define == 1
// Display capability name
if ( stateType == 0xFF && state == 0xFF )
{
@ -322,6 +339,7 @@ void Output_sysCtrlSend_capability( uint8_t state, uint8_t stateType, uint8_t *a
// Set system control code
USBKeys_SysCtrl = args[0];
#endif
}
@ -329,6 +347,7 @@ void Output_sysCtrlSend_capability( uint8_t state, uint8_t stateType, uint8_t *a
// Argument #1: USB Code
void Output_usbCodeSend_capability( uint8_t state, uint8_t stateType, uint8_t *args )
{
#if enableKeyboard_define == 1
// Display capability name
if ( stateType == 0xFF && state == 0xFF )
{
@ -529,6 +548,7 @@ void Output_usbCodeSend_capability( uint8_t state, uint8_t stateType, uint8_t *a
break;
}
#endif
}
void Output_flashMode_capability( uint8_t state, uint8_t stateType, uint8_t *args )
@ -544,6 +564,7 @@ void Output_flashMode_capability( uint8_t state, uint8_t stateType, uint8_t *arg
Output_firmwareReload();
}
#if enableMouse_define == 1
// Sends a mouse command over the USB Output buffer
// XXX This function *will* be changing in the future
// If you use it, be prepared that your .kll files will break in the future (post KLL 0.5)
@ -600,6 +621,7 @@ void Output_usbMouse_capability( uint8_t state, uint8_t stateType, uint8_t *args
if ( mouse_x || mouse_y )
USBMouse_Changed |= USBMouseChangeState_Relative;
}
#endif
@ -643,11 +665,6 @@ inline void Output_send()
// Non-standard USB state manipulation, usually does nothing
usb_device_check();
// Boot Mode Only, unset stale keys
if ( USBKeys_Protocol == 0 )
for ( uint8_t c = USBKeys_Sent; c < USB_BOOT_MAX_KEYS; c++ )
USBKeys_Keys[c] = 0;
// XXX - Behaves oddly on Mac OSX, might help with corrupted packets specific to OSX? -HaaTa
/*
// Check if idle count has been exceed, this forces usb_keyboard_send and usb_mouse_send to update
@ -661,9 +678,17 @@ inline void Output_send()
}
*/
#if enableMouse_define == 1
// Process mouse actions
while ( USBMouse_Changed )
usb_mouse_send();
#endif
#if enableKeyboard_define == 1
// Boot Mode Only, unset stale keys
if ( USBKeys_Protocol == 0 )
for ( uint8_t c = USBKeys_Sent; c < USB_BOOT_MAX_KEYS; c++ )
USBKeys_Keys[c] = 0;
// Send keypresses while there are pending changes
while ( USBKeys_Changed )
@ -684,6 +709,7 @@ inline void Output_send()
Scan_finishedWithOutput( USBKeys_Sent );
break;
}
#endif
}
@ -697,28 +723,41 @@ inline void Output_firmwareReload()
// USB Input buffer available
inline unsigned int Output_availablechar()
{
#if enableVirtualSerialPort_define == 1
return usb_serial_available();
#else
return 0;
#endif
}
// USB Get Character from input buffer
inline int Output_getchar()
{
#if enableVirtualSerialPort_define == 1
// XXX Make sure to check output_availablechar() first! Information is lost with the cast (error codes) (AVR)
return (int)usb_serial_getchar();
#else
return 0;
#endif
}
// USB Send Character to output buffer
inline int Output_putchar( char c )
{
#if enableVirtualSerialPort_define == 1
return usb_serial_putchar( c );
#else
return 0;
#endif
}
// USB Send String to output buffer, null terminated
inline int Output_putstr( char* str )
{
#if enableVirtualSerialPort_define == 1
#if defined(_at90usb162_) || defined(_atmega32u4_) || defined(_at90usb646_) || defined(_at90usb1286_) // AVR
uint16_t count = 0;
#elif defined(_mk20dx128_) || defined(_mk20dx128vlf5_) || defined(_mk20dx256_) || defined(_mk20dx256vlh7_) // ARM
@ -729,6 +768,9 @@ inline int Output_putstr( char* str )
count++;
return usb_serial_write( str, count );
#else
return 0;
#endif
}
@ -739,6 +781,43 @@ inline void Output_softReset()
}
// USB RawIO buffer available
inline unsigned int Output_rawio_availablechar()
{
#if enableRawIO_define == 1
return usb_rawio_available();
#else
return 0;
#endif
}
// USB RawIO get buffer
// XXX Must be a 64 byte buffer
inline int Output_rawio_getbuffer( char* buffer )
{
#if enableRawIO_define == 1
// No timeout, fail immediately
return usb_rawio_rx( (void*)buffer, 0 );
#else
return 0;
#endif
}
// USB RawIO send buffer
// XXX Must be a 64 byte buffer
inline int Output_rawio_sendbuffer( char* buffer )
{
#if enableRawIO_define == 1
// No timeout, fail immediately
return usb_rawio_tx( (void*)buffer, 0 );
#else
return 0;
#endif
}
// Update USB current (mA)
// Triggers power change event
void Output_update_usb_current( unsigned int current )
@ -892,3 +971,15 @@ void cliFunc_setMod( char* args )
USBKeys_ModifiersCLI = numToInt( arg1Ptr );
}
void cliFunc_usbInitTime( char* args )
{
// Calculate overall USB initialization time
// XXX A protocol analyzer will be more accurate, however, this is built-in and easier to collect data
print(NL);
info_msg("USB Init Time: ");
printInt32( USBInit_TimeEnd - USBInit_TimeStart );
print(" ms - ");
printInt16( USBInit_Ticks );
print(" ticks");
}

4
Output/pjrcUSB/output_com.h
View File

@ -99,6 +99,10 @@ extern uint8_t Output_DebugMode; // 0 - Debug disabled, 1 - Debug enab
extern uint16_t Output_ExtCurrent_Available; // mA - Set by outside module if not using USB (i.e. Interconnect)
extern volatile uint32_t USBInit_TimeStart; // Timetamp when usb_init was triggered
extern volatile uint32_t USBInit_TimeEnd; // Timetamp since last call to the Configuration endpoint
extern volatile uint16_t USBInit_Ticks; // Number of times the end time has been updated
// ----- Functions -----

3
Output/pjrcUSB/setup.cmake
View File

@ -1,6 +1,6 @@
###| CMake Kiibohd Controller USB Module |###
#
# Written by Jacob Alexander in 2011-2015 for the Kiibohd Controller
# Written by Jacob Alexander in 2011-2016 for the Kiibohd Controller
#
# Released into the Public Domain
#
@ -30,6 +30,7 @@ elseif ( ${COMPILER_FAMILY} MATCHES "arm" )
arm/usb_keyboard.c
arm/usb_mem.c
arm/usb_mouse.c
arm/usb_rawio.c
arm/usb_serial.c
)

63
Output/usbMuxUart/output_com.c
View File

@ -51,7 +51,8 @@
// ----- Macros -----
// Used to build a bitmap lookup table from a byte addressable array
#define byteLookup( byte ) case (( byte ) * ( 8 )): bytePosition = byte; byteShift = 0; break; \
#define byteLookup( byte ) \
case (( byte ) * ( 8 )): bytePosition = byte; byteShift = 0; break; \
case (( byte ) * ( 8 ) + ( 1 )): bytePosition = byte; byteShift = 1; break; \
case (( byte ) * ( 8 ) + ( 2 )): bytePosition = byte; byteShift = 2; break; \
case (( byte ) * ( 8 ) + ( 3 )): bytePosition = byte; byteShift = 3; break; \
@ -72,6 +73,7 @@ void cliFunc_sendKeys ( char* args );
void cliFunc_sendUART ( char* args );
void cliFunc_setKeys ( char* args );
void cliFunc_setMod ( char* args );
void cliFunc_usbInitTime( char* args );
@ -86,6 +88,7 @@ CLIDict_Entry( sendKeys, "Send the prepared list of USB codes and modifier by
CLIDict_Entry( sendUART, "Send characters over UART0." );
CLIDict_Entry( setKeys, "Prepare a space separated list of USB codes (decimal). Waits until \033[35msendKeys\033[0m." );
CLIDict_Entry( setMod, "Set the modfier byte:" NL "\t\t1 LCtrl, 2 LShft, 4 LAlt, 8 LGUI, 16 RCtrl, 32 RShft, 64 RAlt, 128 RGUI" );
CLIDict_Entry( usbInitTime, "Displays the time in ms from usb_init() till the last setup call." );
CLIDict_Def( outputCLIDict, "USB Module Commands" ) = {
CLIDict_Item( kbdProtocol ),
@ -96,6 +99,7 @@ CLIDict_Def( outputCLIDict, "USB Module Commands" ) = {
CLIDict_Item( sendUART ),
CLIDict_Item( setKeys ),
CLIDict_Item( setMod ),
CLIDict_Item( usbInitTime ),
{ 0, 0, 0 } // Null entry for dictionary end
};
@ -167,6 +171,11 @@ uint16_t Output_ExtCurrent_Available = 0;
// Initially 100 mA, but may be negotiated higher (e.g. 500 mA)
uint16_t Output_USBCurrent_Available = 0;
// USB Init Time (ms)
volatile uint32_t USBInit_TimeStart;
volatile uint32_t USBInit_TimeEnd;
volatile uint16_t USBInit_Ticks;
// ----- Capabilities -----
@ -174,6 +183,7 @@ uint16_t Output_USBCurrent_Available = 0;
// Set Boot Keyboard Protocol
void Output_kbdProtocolBoot_capability( uint8_t state, uint8_t stateType, uint8_t *args )
{
#if enableKeyboard_define == 1
// Display capability name
if ( stateType == 0xFF && state == 0xFF )
{
@ -195,12 +205,14 @@ void Output_kbdProtocolBoot_capability( uint8_t state, uint8_t stateType, uint8_
// Set the keyboard protocol to Boot Mode
USBKeys_Protocol = 0;
#endif
}
// Set NKRO Keyboard Protocol
void Output_kbdProtocolNKRO_capability( uint8_t state, uint8_t stateType, uint8_t *args )
{
#if enableKeyboard_define == 1
// Display capability name
if ( stateType == 0xFF && state == 0xFF )
{
@ -222,12 +234,14 @@ void Output_kbdProtocolNKRO_capability( uint8_t state, uint8_t stateType, uint8_
// Set the keyboard protocol to NKRO Mode
USBKeys_Protocol = 1;
#endif
}
// Toggle Keyboard Protocol
void Output_toggleKbdProtocol_capability( uint8_t state, uint8_t stateType, uint8_t *args )
{
#if enableKeyboard_define == 1
// Display capability name
if ( stateType == 0xFF && state == 0xFF )
{
@ -244,12 +258,14 @@ void Output_toggleKbdProtocol_capability( uint8_t state, uint8_t stateType, uint
// Toggle the keyboard protocol Mode
USBKeys_Protocol = !USBKeys_Protocol;
}
#endif
}
// Sends a Consumer Control code to the USB Output buffer
void Output_consCtrlSend_capability( uint8_t state, uint8_t stateType, uint8_t *args )
{
#if enableKeyboard_define == 1
// Display capability name
if ( stateType == 0xFF && state == 0xFF )
{
@ -278,6 +294,7 @@ void Output_consCtrlSend_capability( uint8_t state, uint8_t stateType, uint8_t *
// Set consumer control code
USBKeys_ConsCtrl = *(uint16_t*)(&args[0]);
#endif
}
@ -299,6 +316,7 @@ void Output_noneSend_capability( uint8_t state, uint8_t stateType, uint8_t *args
// Sends a System Control code to the USB Output buffer
void Output_sysCtrlSend_capability( uint8_t state, uint8_t stateType, uint8_t *args )
{
#if enableKeyboard_define == 1
// Display capability name
if ( stateType == 0xFF && state == 0xFF )
{
@ -327,6 +345,7 @@ void Output_sysCtrlSend_capability( uint8_t state, uint8_t stateType, uint8_t *a
// Set system control code
USBKeys_SysCtrl = args[0];
#endif
}
@ -334,6 +353,7 @@ void Output_sysCtrlSend_capability( uint8_t state, uint8_t stateType, uint8_t *a
// Argument #1: USB Code
void Output_usbCodeSend_capability( uint8_t state, uint8_t stateType, uint8_t *args )
{
#if enableKeyboard_define == 1
// Display capability name
if ( stateType == 0xFF && state == 0xFF )
{
@ -534,6 +554,7 @@ void Output_usbCodeSend_capability( uint8_t state, uint8_t stateType, uint8_t *a
break;
}
#endif
}
void Output_flashMode_capability( uint8_t state, uint8_t stateType, uint8_t *args )
@ -557,6 +578,7 @@ void Output_flashMode_capability( uint8_t state, uint8_t stateType, uint8_t *arg
// Argument #3: USB Y Axis (16 bit) relative
void Output_usbMouse_capability( uint8_t state, uint8_t stateType, uint8_t *args )
{
#if enableMouse_define == 1
// Display capability name
if ( stateType == 0xFF && state == 0xFF )
{
@ -604,6 +626,7 @@ void Output_usbMouse_capability( uint8_t state, uint8_t stateType, uint8_t *args
if ( mouse_x || mouse_y )
USBMouse_Changed |= USBMouseChangeState_Relative;
#endif
}
@ -652,10 +675,6 @@ inline void Output_send()
usb_device_check();
// Boot Mode Only, unset stale keys
if ( USBKeys_Protocol == 0 )
for ( uint8_t c = USBKeys_Sent; c < USB_BOOT_MAX_KEYS; c++ )
USBKeys_Keys[c] = 0;
// XXX - Behaves oddly on Mac OSX, might help with corrupted packets specific to OSX? -HaaTa
/*
// Check if idle count has been exceed, this forces usb_keyboard_send and usb_mouse_send to update
@ -669,9 +688,16 @@ inline void Output_send()
}
*/
#if enableMouse_define == 1
// Process mouse actions
while ( USBMouse_Changed )
usb_mouse_send();
#endif
#if enableKeyboard_define == 1
if ( USBKeys_Protocol == 0 )
for ( uint8_t c = USBKeys_Sent; c < USB_BOOT_MAX_KEYS; c++ )
USBKeys_Keys[c] = 0;
// Send keypresses while there are pending changes
while ( USBKeys_Changed )
@ -692,6 +718,7 @@ inline void Output_send()
Scan_finishedWithOutput( USBKeys_Sent );
break;
}
#endif
}
@ -705,18 +732,24 @@ void Output_firmwareReload()
// USB Input buffer available
inline unsigned int Output_availablechar()
{
#if enableVirtualSerialPort_define == 1
return usb_serial_available() + uart_serial_available();
#else
return uart_serial_available();
#endif
}
// USB Get Character from input buffer
inline int Output_getchar()
{
#if enableVirtualSerialPort_define == 1
// XXX Make sure to check output_availablechar() first! Information is lost with the cast (error codes) (AVR)
if ( usb_serial_available() > 0 )
{
return (int)usb_serial_getchar();
}
#endif
if ( uart_serial_available() > 0 )
{
@ -730,11 +763,15 @@ inline int Output_getchar()
// USB Send Character to output buffer
inline int Output_putchar( char c )
{
#if enableVirtualSerialPort_define == 1
// First send to UART
uart_serial_putchar( c );
// Then send to USB
return usb_serial_putchar( c );
#else
return uart_serial_putchar( c );
#endif
}
@ -750,11 +787,15 @@ inline int Output_putstr( char* str )
while ( str[count] != '\0' )
count++;
#if enableVirtualSerialPort_define == 1
// First send to UART
uart_serial_write( str, count );
// Then send to USB
return usb_serial_write( str, count );
#else
return uart_serial_write( str, count );
#endif
}
@ -938,3 +979,15 @@ void cliFunc_setMod( char* args )
USBKeys_ModifiersCLI = numToInt( arg1Ptr );
}
void cliFunc_usbInitTime( char* args )
{
// Calculate overall USB initialization time
// XXX A protocol analyzer will be more accurate, however, this is built-in and easier to collect data
print(NL);
info_msg("USB Init Time: ");
printInt32( USBInit_TimeEnd - USBInit_TimeStart );
print(" ms - ");
printInt16( USBInit_Ticks );
print(" ticks");
}