- Updated port switching pins (split USB and UART switching)
- Added basic support for 2nd i2c bus
- Updated key matrix
- Fixed udev rules
- Added missing register defines

- Only works in Prototype 2+
- No longer combining Interconnect and USB switching into the same pin (more flexibility)

- Adds 32 channels of RGB leds
- Increases buffer pages to 4
- Increases max channels to 576

Integrating upstream changes into PixelMap modifications

- Still very basic (lots of room for improvement)
- Capability format will likely change at some point
- 16 bit movement control, however repeat rate limits usability (will need KLL 0.4 to make better)

- Full Mouse support will have to wait for KLL 0.6
  * This will include dynamic HID descriptor generation for many wheels and axis depending on the KLL needs
- HID descriptor is currently limited to 8 buttons
- Technically mouse movement also works (tested by accident), but it's disable for now (needs some API thought)

- Adding additional udev rules
- Added KRO mode default define

- clang.c includes necessary functions to make clang compiler work (tested on teensy 3.1)
- Added support code to generate a compile_commands.json for clang-tidy
  * Updates the symlink whenever cmake or make is called (Unix OSs only)

Fixes in CK3 (ghosting matrix), working version on full keyboard.

- Added fix for USB Current Change
  * If called during interrupt, could hang the I2C bus
  * Delaying I2C writes till scan loop

Added STROBE_DELAY define in matrix.h
All keys scan codes now in defaultMap.kll

- Each scan module now has a current change callback which passes the available current as a parameter
- No longer attempts to use the max 500 mA immediately, starts with 100 mA then goes to 500 mA after enumeration
- If enumeration fails due to bMaxPower of 500 mA, then attempt again at 100 mA (might also be possible to go even lower to 20 mA in certain cases)
- Now working with the Apple Ipad (no over-power messages)
- Fixed Wake-up behaviour on Apple Ipad (and likely other iOS devices)
- More effecient set_feature/clear_feature handling (device handler)
- Initial power handling via Interconnect (still needs work to get it more dynamic)

Renamed define to GHOSTING_MATRIX.
Deleted unused files from CK3.

To use define GHOST in matrix.h, see example in Scan/CK3

In situations where `ls` colors directories incorrectly, the `$module`
variable contains unprintable characters. This causes directories to be
impossible to `cd` into normally, and is generally a pain.

 - IC60 /w Single color LEDs
 - Requires a different matrix configuration so it's incompatible with the old IC60 layout

bash might not be in /bin. Don't expect it there.

- Each scan module now has a current change callback which passes the available current as a parameter
- No longer attempts to use the max 500 mA immediately, starts with 100 mA then goes to 500 mA after enumeration
- If enumeration fails due to bMaxPower of 500 mA, then attempt again at 100 mA (might also be possible to go even lower to 20 mA in certain cases)
- Now working with the Apple Ipad (no over-power messages)
- Fixed Wake-up behaviour on Apple Ipad (and likely other iOS devices)
- More effecient set_feature/clear_feature handling (device handler)
- Initial power handling via Interconnect (still needs work to get it more dynamic)

- This amount of current is guaranteed by the USB spec before enumeration
- Generally the bootloader doesn't need nearly this much, but to be safe

Added support for ghosting matrices and code for elimination.

Renamed define to GHOSTING_MATRIX.
Deleted unused files from CK3.

To use define GHOST in matrix.h, see example in Scan/CK3

Fix a handful of infinite loops that occur with more than 254 macros

Ensure directories can only be made with printable characters

 - IC60 /w Single color LEDs
 - Requires a different matrix configuration so it's incompatible with the old IC60 layout

In situations where `ls` colors directories incorrectly, the `$module`
variable contains unprintable characters. This causes directories to be
impossible to `cd` into normally, and is generally a pain.

Get build working on FreeBSD