- Thanks hasu for pointing it out
- Keycode 50 is problematic under Linux, so removing (it's a duplicate keycode anyways)

- 128 bytes is invalid for USB 2.0 Full-Speed (max 64 bytes)

- When changing the mode, a key buffer flush is required (might confuse the OS temporarily)

- Setting NKRO mode as default (up to bios to disable)

- Added NKRO descriptor
- Added NKRO HID descriptor
- Updated boot HID descriptor
- Fixed many bugs with the pjrc ARM usb stack (with USB HID)

- Easier to debug USB initialization

- Missing device qualifier descriptor
- Missing USB Debug descriptor (used by lsusb)

- Added fake capability for compilation

- Changing main device type to HID (0x03)

- API changes from the AVR NKRO support

- NKRO for USB Codes 4 to 164, 176 to 221 and modifiers
- Added System Control support codes 129 to 183
- Added Consumer Control support codes 32 to 668

- Should be everything necessary for the next while
- Adds Consumer and System controls

- Needs to be at 16 MHz for proper function

- Only send USB events when something changes (rather than every ms)

- Split up TriggerMacro and ResultMacro to help the compiler optimize better
- Static RAM usage did not decrease, total flash usage did

- Earlier RAM optimizations uncovered a bunch of layer/macro bugs

- Only keep state for the scan code that are available for the layer
- Also properly implemented scan code range checking (was not done before, only worked because the KLL compiler was well behaved)

- Typing now works on the kishsaver (including modifiers)
- Still some issues with RAM usage when using more than the default layer

- Still working on USB NKRO

Instructions:
- Windows virtual serial port
- Mac OSX virtual serial port
- Mac OSX firmware loading instructions
- Initial Mac OSX building instructions
- Initial Bootloader make and installation instructions for Linux

- Updated Windows build instructions
- Added some notes on all the types of builds.
- Updated dependency lists

- Bootloader doesn't build correctly on gcc 4.7.3 (LTO issues)
- Even disabling isn't good enough
- 4.9.1 is known to work on Arch Linux

- Added layout files for 50 key and kishsaver
- Not yet working (some USB issues on AVR to debug)
- Fixed an OSX issue when building AVR
- Cleanup

- Automatically downloads the kll compiler if not found
- Added capability files to each of the module that currently have them
- Split modules.cmake so kll.cmake could influence build targets (also needs info from modules.cmake)
- Updated .gitignore for kll compiler directory
- Added documentation on how to manipulate layouts using CMakeLists.txt
- Cleanup of old layout files

- For both uC architecture differences and RAM saving

- Allows for RAM space savings on small microcontrollers at the expense of macro length and number of macros/key assignments

- Layers were not disabling because function was only called on press/hold
- Disabled layer shift function on key hold
- Fixed the press/hold/release states for other layer capabilities and USB code send

- Split layer capability into different parts
- Convenience Shift, Latch, Lock
- Keeping the original capability because it also allows specifically turning layers off and is useful for debugging

- Preparation to integrating the compiler

Tested
------
Single : Single
Single : Combo
Single : Sequence
Combo : Single
Combo : Combo
Combo : Sequence
Sequence : Single
Sequence : Combo
Sequence : Sequence

- More complex macro not yet tested (long Trigger to long Result)
- Long Trigger Macros not tested yet

- CLI now works with hex or decimal numbers
- Hex requires 0x (technically just x would work too)

- Fixed USB Vendor name as well

- Heavily modified, not compatible with McHCK images
- Uses 4k of Flash (rather than 3k)
- LED turns on when in firmware flash mode
- Changed the USB IDs
- Added CMake build system
- Updated linker script to be closer to what is used for the rest of the projects
- Removed a lot of unnecessary code
- Added a license header to each file (using the same license as the McHCK had)
- Updated the USB Vendor, Product and Serial strings
- Using the Kiibohd initialization sequence rather than the McHCK one
- Using Kiibohd interrupt vector table and other misc mk20dx setup

- Changed static variables to const that should have been const
- Updated CMake files to prepare for MCHCK custom bootloader
- Changed the USB ID numbers and ID number for bootloader
- Only generate DFU or Teensy binary image, not both
- Fixed RAM and FLASH calculator
- Added missing license in delay.c/h (much of it was taken from Teensy source though I've changed a bunch of it)
- Prepared mk20dx.c for upcoming bootloader addition
- mk20dx.h cleanup
- Reduced the MCHCK based flash size for the application image (bootloader changes requires more flash space)
- Fixed bugs in macro.c
- Added keyHold cli command
- Added show pending events debug message for PartialMap macro module

- Macros and Layers are, code-wise, feature complete

- Basic features only (there are still some extra options that can be added)
- Not tested
- ResultMacro processor is complete
- Layer enabling capability not yet complete
- USB Key output capability not yet complete

- Not tested, but basic features should be complete

- CLI Debugging options added
- Various bug fixes for the matrix scanning algorithm
- Changed debouncing algorithm