To use define GHOST in matrix.h, see example in Scan/CK3

- Includes basic (led) channel testing tools
- Currently hard-coded, needs kll integration before this can be used in general

- Added port swapping to KType
- Added initial KType default keymappings
- Initial PixelMap animiation framework
- Swapped in new i2c library for ISSILed

- Works the same as the bootloader variant, waits 1000 ms before attempting to swap
  Only swaps if USB not already intialized
  If USB never initializes, will swap forever

TODO
- Stop swapping if UARTConnect detected and initialized

- Basic support for up to 4 ISSI chips (and partial support for 16 chip configurations)
- Initial USB mux support
  * Required USB re-init procedure
- Initial interconnect mux support
  * Required some state reset commands

- Basic support for up to 4 ISSI chips (and partial support for 16 chip configurations)
- Initial USB mux support
  * Required USB re-init procedure
- Initial interconnect mux support
  * Required some state reset commands

- Rx buffers weren't fast enough, had to use DMA :D
- Basic LCD remote capabilities are working, single node
- Multi-node broadcast seems to have a bug still
- DMA ring buffer allowed for significant processing simplification
  * There is an overrun risk, but the buffer is large and generally there isn't too much data being sent (just very quickly)
- Split out LCD layer stack capability into itself and an "exact" version used for updating remote nodes

- Uses expiry timer to decide on when to allow a state change
- Initial state transitions are unaffected
- Use MinDebounceTime define in kll to configure
- ms granularity

By default:
DebounceThrottleDiv = 0;
This is the default infinity behaviour right now (may be changed in the future).

Increasing DebounceThrottleDiv will increase the scan rate divider.
DebounceThrottleDiv = 1; # Scans half as much
DebounceThrottleDiv = 2; # Scans a quarter as much
DebounceThrottleDiv = 3; # Scans an eigth as much
etc.

For ARM based uCs (like the Infinity) the maximum divider is 32.

Can be specified from any .kll file

DebounceDivThreshold = 0xFFFFFFFF
Sets to max debounce, default is 0xFFFF.
The 0xFFFFFFFF is about a 2x longer debounce
The max requires more ram (as it uses 32 bit variables instead of 16).

Added support for submodule capabilities files.

- It's possible to get even more, but this is probably as far as I'll go
- PROGMEM is really annoying to use, and makes the code look like ass
- Now the Teensy 2++ should have enough RAM to use PartialMap easily

- CLI now works with hex or decimal numbers
- Hex requires 0x (technically just x would work too)

- Changed static variables to const that should have been const
- Updated CMake files to prepare for MCHCK custom bootloader
- Changed the USB ID numbers and ID number for bootloader
- Only generate DFU or Teensy binary image, not both
- Fixed RAM and FLASH calculator
- Added missing license in delay.c/h (much of it was taken from Teensy source though I've changed a bunch of it)
- Prepared mk20dx.c for upcoming bootloader addition
- mk20dx.h cleanup
- Reduced the MCHCK based flash size for the application image (bootloader changes requires more flash space)
- Fixed bugs in macro.c
- Added keyHold cli command
- Added show pending events debug message for PartialMap macro module

- CLI Debugging options added
- Various bug fixes for the matrix scanning algorithm
- Changed debouncing algorithm

- Cleaned up Macro and USB callback naming
- Added security jumper for automated reload (MCHCK based only)
- Added additional LED position