- CMake 3.6 finally adds proper cross-compiler detection
- When detected, use full compiler detection infrastructure
- Still maintains compatibility back to CMake 2.8 (at least for now)
- With new detection, selecting only the C compiler as it speeds up the CMake generaion process
- Added a GCC 4.9 minimum version requirement for Bootloader

- clang.c includes necessary functions to make clang compiler work (tested on teensy 3.1)
- Added support code to generate a compile_commands.json for clang-tidy
  * Updates the symlink whenever cmake or make is called (Unix OSs only)

- Required updates to CMake in order to handle the multi-layer BaseMaps

- Basic screen initialization and clear is working
- Currently SPI is set to a low speed for easy logic analyzer debugging

Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.

- Currently builds larger binaries than gcc (RAM)

Latch now activates on key release, and deactivates on next key release.

- Use CMake -D arguments to set variables (so you don't have to edit the CMakeLists.txt file)

- API changes from the AVR NKRO support

- NKRO for USB Codes 4 to 164, 176 to 221 and modifiers
- Added System Control support codes 129 to 183
- Added Consumer Control support codes 32 to 668

- Split up TriggerMacro and ResultMacro to help the compiler optimize better
- Static RAM usage did not decrease, total flash usage did

- Earlier RAM optimizations uncovered a bunch of layer/macro bugs

- Typing now works on the kishsaver (including modifiers)
- Still some issues with RAM usage when using more than the default layer

- Still working on USB NKRO

- Automatically downloads the kll compiler if not found
- Added capability files to each of the module that currently have them
- Split modules.cmake so kll.cmake could influence build targets (also needs info from modules.cmake)
- Updated .gitignore for kll compiler directory
- Added documentation on how to manipulate layouts using CMakeLists.txt
- Cleanup of old layout files

- Changed static variables to const that should have been const
- Updated CMake files to prepare for MCHCK custom bootloader
- Changed the USB ID numbers and ID number for bootloader
- Only generate DFU or Teensy binary image, not both
- Fixed RAM and FLASH calculator
- Added missing license in delay.c/h (much of it was taken from Teensy source though I've changed a bunch of it)
- Prepared mk20dx.c for upcoming bootloader addition
- mk20dx.h cleanup
- Reduced the MCHCK based flash size for the application image (bootloader changes requires more flash space)
- Fixed bugs in macro.c
- Added keyHold cli command
- Added show pending events debug message for PartialMap macro module

- Cleaned up Macro and USB callback naming
- Added security jumper for automated reload (MCHCK based only)
- Added additional LED position

- McHCK uses FLL instead of the PLL for USB (startup, not usb init)
- Added optional debug for the pjrc USB module
- Cleaned up compiler flags

- Lots of code cleanup for the intialization of all arm chips
- Added more gcc flags to help with debugging linker and memory map
- Fixed UART initialization for the smaller MCHCK mk20dx128 (different pin mux)

- Sending characters to the UART before it's ready would overflow the buffer causing it to hang
- Added a check to make sure the interface is ready before starting to send characters
- Removed the incorrect check for the usbMuxUart to make sure usb is ready before sending over the uart

- The UART out may be useful for Bluetooth keyboards at some point

- Refactored pjrc USB (definitions to the .h file)

- Only one file to edit now
- Compiler architecture automatically detected based off of chip target

- Not tested yet, but should be working.

- Currently only Linux tested.

- This is a patched version to work with Teensy 3.1 (current version on the website doesn't work)
- "Should" work with OS's other than Linux, but hasn't been tested

- Code should be working, but much is untested
- All of the old modules will need to update and use the new DefaultMap keymap
- There might still be some naming conflicts with some Scan Modules

- Includes serial putchar and getchar cleanup (overall)
- Moved avr-capsense to DPH (renaming)
- Basic cleanup for including CLI on the avr architecture

* Initial cli code

- Adding "template" keymap
- Removed "stray" functions, variables
- Cleaned up warnings
- Now builds
- Added buffered macro integration (rather than dealing with USB directly)
- Updated the print messages to use the Kiibohd print header

TODO
- Add generic matrix integration (this will require some changes to the matrix code)
- Add more comments...lots more
- Clean up dead code

- Also a bit of general house-keeping

- Had to add the iSerialNumber parameter to the AVR USB descriptor
- Removed a faulty pack command for avr-gcc that is not required

- Defined Manufacturer name
- Product name now references each of the selected modules
- Serial number refers to the last commit date, branch, and whether modified since the last commit

- All modules have a default avr compatibilty right now (since that is what they were developed on)
- As modules get tested and added, arm support has to be turned on in the respective setup.cmake file

- CDC Output seems to be working
- USB Keyboard output has not been tested, but is "ready"
- UART and Timers have not been tested, or fully utilized
- Issues using Timer 0
- Initial template for MBC-55X Scan module (only module currently compatible with the arm build)
- Updated the interface to the AVR usb module for symmetry with the ARM usb module
- Much gutting was done to the Teensy 3 usb keyboard module, though not in an ideal state yet

- Also added some extra CMake build messages for indicating the Compiler family and chip being built for

- Tested with the AVR builds
- Partially tested with basic ARM test builds

- Use Makefiles from Cygwin