Archived
1
0
Commit Graph

31 Commits

Author SHA1 Message Date
Jacob Alexander
a108dbbbc3 Debugging kishsaver.
- Hardcoded strobe lines (required to make the hardware less noisy)
- Updated debug code
2013-11-16 19:37:16 -05:00
Jacob Alexander
4ce6d34cd8 Adapting the avr-capsense code to the Kiibohd Controller API
- Adding "template" keymap
- Removed "stray" functions, variables
- Cleaned up warnings
- Now builds
- Added buffered macro integration (rather than dealing with USB directly)
- Updated the print messages to use the Kiibohd print header

TODO
- Add generic matrix integration (this will require some changes to the matrix code)
- Add more comments...lots more
- Clean up dead code
2013-11-16 19:37:16 -05:00
Jacob Alexander
ca190c4fd9 Removed Joystick endpoint from ARM usb module
- Also a bit of general house-keeping
2013-02-01 23:35:12 -05:00
Jacob Alexander
9dcb0f7b66 Fixing regression build 2013-02-01 21:19:31 -05:00
Jacob Alexander
99b3deba67 Completing CMake variable generation for USB parameters (AVR Support)
- Had to add the iSerialNumber parameter to the AVR USB descriptor
- Removed a faulty pack command for avr-gcc that is not required
2013-02-01 20:30:14 -05:00
Jacob Alexander
b7afaa100f CMake generated strings that configure the USB info section
- Defined Manufacturer name
- Product name now references each of the selected modules
- Serial number refers to the last commit date, branch, and whether modified since the last commit
2013-02-01 20:02:55 -05:00
Jacob Alexander
fc7998d605 Adding module compatibility check to CMake build scripts.
- All modules have a default avr compatibilty right now (since that is what they were developed on)
- As modules get tested and added, arm support has to be turned on in the respective setup.cmake file
2013-01-30 18:13:49 -05:00
Jacob Alexander
c8b4baf652 Adding initial Teensy 3 support, compiles, but not fully functional yet.
- CDC Output seems to be working
- USB Keyboard output has not been tested, but is "ready"
- UART and Timers have not been tested, or fully utilized
- Issues using Timer 0
- Initial template for MBC-55X Scan module (only module currently compatible with the arm build)
- Updated the interface to the AVR usb module for symmetry with the ARM usb module
- Much gutting was done to the Teensy 3 usb keyboard module, though not in an ideal state yet
2013-01-27 01:47:52 -05:00
Jacob Alexander
b368b13240 Updating CMake build system to prepare for Teensy 3 integration.
- Tested with the AVR builds
- Partially tested with basic ARM test builds
2013-01-26 04:34:33 -05:00
Jacob Alexander
94390571c4 Adding initial FACOM template, and buildall.bash regression script. 2013-01-14 21:31:50 -05:00
Jacob Alexander
59e443552c Completing the HP150 converter. 2012-11-17 02:13:06 -08:00
Jacob Alexander
0c39927268 Adding initial HP150 and IBMConvertible scan modules.
- HP150 is not ready
- IBMConvertible is ready to start testing
2012-11-15 01:28:31 -08:00
Jacob Alexander
b8fddd61f5 Adding SKM67001 scan module.
- Uses the matrix module, which is now moderately working now for NKRO diode keyboards
2012-10-04 12:07:06 -07:00
Jacob Alexander
65366a4e7a Adding initial version of Sony OA-S3400 converter.
- Not fully reading for usage, but 90% of the way there for typing.
- Some soldering is required for 2 keys to work properly (Shift and Shift Lock)
- Even when complete, be careful when doing multiple key combos, as the key buffer is only cleared when all general keys are released (all except Shift, Shift Lock, and Code)
2012-05-07 02:32:56 -04:00
Jacob Alexander
9b1f7e486c Initial commit of the Burroughs Ergonomic Terminal Keyboard module (BETKB)
- Doesn't work yet
2012-03-26 19:02:46 -04:00
Jacob Alexander
b1686ce7ad Adding inital outline for Univac-Sperry F3W9 keyboard.
- Not tested yet
- Packet size is large so it's not possible to use Teensy hardware
2012-03-03 21:16:41 -05:00
Jacob Alexander
ea284c03f0 Fixing the macro section for the Bud Keypad 2012-02-13 14:04:53 -05:00
Jacob Alexander
e3fc873cba Final SonyNEWS commit before sending device back 2011-12-19 17:48:47 -08:00
Jacob Alexander
108b0d3e8e Cleaning up the BudKeypad module for the Buffered Macro Module
- Fixed key repeat rate issues
- Added the recent function additions to the scan module API
2011-12-18 19:02:56 -08:00
Jacob Alexander
8f8de985c5 Initial commit of the Epson QX-10 Keyboard module
- LEDs are working
- Reset command is working
- Basic typing is working (USB side drops some characters)
- Changing repeat rate is working
- Querying modifiers and LEDs is working
- Initial layouts are complete
- Modifiers are not fully working yet
2011-12-10 22:48:53 -08:00
Jacob Alexander
ac5f6c015d Pre Tandy1000 overhaul 2011-11-28 22:20:04 -08:00
Jacob Alexander
0c562995c7 Adding support for the Micro Switch 8304 Hall Effect Keyboard
- Full support (NKRO, provided the USB module can handle it)
- Full LED support (available to the macro modules per input signals)
- Reset/Hold line support
- Handles repeat rate issues (keyboard does not send key updates as most
  keyboards do...)
2011-11-13 02:04:44 -08:00
Jacob Alexander
a017d2f270 Adding Kaypro1 functional support
- Uses USART instead of polling
- Supports two way communication (only 3 commands to the keyboard
  though)
- Kaypro sends data as ASCII, which severely limits the handling of
  modifiers
- No release signal is sent, so even faking modifiers is next to
  impossible outside of Shift and Ctrl
- Includes default QWERTY and Colemak layouts
- Developed a new buffer macro, which will become the basic macro module
  once all the other modules have been ported (much more efficient, as
  it keeps serial scanning schemes serial, and parallel scanning schemes
  such as matrix, that already serialized into a sort of buffer for the
  debouncing evaluation)
- This module is quite efficient, and would be able to handle very
  excessive macro processing in the future.
- If more of the keypboard communication protocol is desired, I have a
  rom dump of the microcontroller (M5L8049)
2011-11-03 00:09:10 -07:00
Jacob Alexander
266b59b851 Initial commit of the Kaypro1 scan module
- Does not output to usb yet
- USART is functionally getting characters from the keyboard and sending
  beep codes and ACK request code (Baud rate properly calculated)
- Uses hard-coded keys for the PC to Keyboard commands (not desireable)
- Keyboard sends ASCII data, which makes doing things like holding
  multiple keys almost impossible to detect (the board isn't NKRO
  anyways, though I've found 8+ key combos that work)
2011-11-01 00:02:10 -07:00
Jacob Alexander
e3042a3526 Making sub-modules of matrix for HeathZenith and BudKeypad
- Parent module no longer allows for a stand-alone compile
- Added HeathZenith matrix (pinout still needs to be done)
- Updated the HeathZenith keymaps
- Changed the original example matrix.h to matrix_template.h
2011-10-16 21:38:56 -07:00
Jacob Alexander
6557022f20 Basic matrix module for the hall effect keypad now working.
- Includes new "table pinning" setup (much easier to understand)
- Matrix layouts will be split into their own dependent modules later
- Changed the HID Raw view id (too many teensy devices on this
  computer...)
- Moved the macro processing outside of the usb timer signal
  (this will be slower overall, but will result in more consistant
  behaviour)
2011-10-15 20:01:46 -07:00
Jacob Alexander
46916defa5 Tandy 1000 Converter, basicly works, except for packet mismatches
- Caused by too much processing in the converter...
- Easy to fix if I remove the macro engine...
2011-10-01 00:54:18 -07:00
Jacob Alexander
c01efa2d53 Formalizing code module structure and inheritance (Large Commit)
- Commenting cleaned up
- usb_keyboard_debug is not finished yet in terms of cleanup (needs DEBUB_PRINT #ifdef's)
- Added LoadFile script generation
- Formalized KeyIndex and USBKeys data containers
- Split parts of scan_loop into Macro, USB, and main.c
- Added interface to USB modules
- Added interface to Macro modules
- Added proper Debug module enable/disable
2011-09-29 22:22:19 -07:00
Jacob Alexander
a0439f627b Updating the build script to remove includes hack
- Providing HEAD_DIR variable that can be prepended to refer to the top of the source directory
2011-09-29 15:33:13 -07:00
Jacob Alexander
fd569b9de3 Removing old files 2011-09-29 15:07:18 -07:00
Jacob Alexander
b4e1868d19 Reorganization for use with the CMake "Modules"
- Include option is currently "hacked" and needs to be fixed
- Builds on Linux, but Mac and Windows needs to be tested
- Loader script generation isn't complete
2011-09-28 23:25:51 -07:00