- Supports up to 255 slave nodes (you'll run into ScanCode limitations before then)
- Requires most recent kll compiler update
- Additional debugging output and stats counters
- Noise and parity checking
- Fixed TxFIFO issue when sending buffers larger than the FIFO
- Cleaned up defaultMap.kll
- Added ScanCode caching (reduces interconnect traffic significantly)
- Interconnect module code is conditionally compiled into PartialMap module if required

- Still some issues
- Will require some changes to MatrixARM and PartialMap
  * Currently state information is passed around too frequently
  * Needs to be reduced to state changes only

- Adding NL's for fault messages

- Useful when trying to report layer stacking bugs
- Or at least getting unconfused about what's happening with the layers

- Changing header file ifndef define to pragma once's
- Removed duplicate output_com.h's

* Keyboard interconnect using two uarts
* Supports daisy chain addressing using a master/slave direction communication scheme

- Still needs more testing
- Functions have been tested alone to be generally working

Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.

- Pressed key will remain on the same layer until released
  regardless of the layer changes that happen in the meantime

(Requires a kll update to work correctly)

- Added AddModule CMake function which simplifies specifying module requirements

- Not ready yet
- Will require some more changes to Lib/mk20dx.c

Latch now activates on key release, and deactivates on next key release.

- It's possible to get even more, but this is probably as far as I'll go
- PROGMEM is really annoying to use, and makes the code look like ass
- Now the Teensy 2++ should have enough RAM to use PartialMap easily

- Should be everything necessary for the next while
- Adds Consumer and System controls

- Only send USB events when something changes (rather than every ms)

- Split up TriggerMacro and ResultMacro to help the compiler optimize better
- Static RAM usage did not decrease, total flash usage did

- Earlier RAM optimizations uncovered a bunch of layer/macro bugs

- Only keep state for the scan code that are available for the layer
- Also properly implemented scan code range checking (was not done before, only worked because the KLL compiler was well behaved)

- Added layout files for 50 key and kishsaver
- Not yet working (some USB issues on AVR to debug)
- Fixed an OSX issue when building AVR
- Cleanup

- Automatically downloads the kll compiler if not found
- Added capability files to each of the module that currently have them
- Split modules.cmake so kll.cmake could influence build targets (also needs info from modules.cmake)
- Updated .gitignore for kll compiler directory
- Added documentation on how to manipulate layouts using CMakeLists.txt
- Cleanup of old layout files

- For both uC architecture differences and RAM saving

- Allows for RAM space savings on small microcontrollers at the expense of macro length and number of macros/key assignments

- Layers were not disabling because function was only called on press/hold
- Disabled layer shift function on key hold
- Fixed the press/hold/release states for other layer capabilities and USB code send

- Split layer capability into different parts
- Convenience Shift, Latch, Lock
- Keeping the original capability because it also allows specifically turning layers off and is useful for debugging

- Preparation to integrating the compiler

Tested
------
Single : Single
Single : Combo
Single : Sequence
Combo : Single
Combo : Combo
Combo : Sequence
Sequence : Single
Sequence : Combo
Sequence : Sequence

- More complex macro not yet tested (long Trigger to long Result)
- Long Trigger Macros not tested yet

- CLI now works with hex or decimal numbers
- Hex requires 0x (technically just x would work too)

- Changed static variables to const that should have been const
- Updated CMake files to prepare for MCHCK custom bootloader
- Changed the USB ID numbers and ID number for bootloader
- Only generate DFU or Teensy binary image, not both
- Fixed RAM and FLASH calculator
- Added missing license in delay.c/h (much of it was taken from Teensy source though I've changed a bunch of it)
- Prepared mk20dx.c for upcoming bootloader addition
- mk20dx.h cleanup
- Reduced the MCHCK based flash size for the application image (bootloader changes requires more flash space)
- Fixed bugs in macro.c
- Added keyHold cli command
- Added show pending events debug message for PartialMap macro module

- Macros and Layers are, code-wise, feature complete

- Basic features only (there are still some extra options that can be added)
- Not tested
- ResultMacro processor is complete
- Layer enabling capability not yet complete
- USB Key output capability not yet complete

- Not tested, but basic features should be complete

- Cleaned up Macro and USB callback naming
- Added security jumper for automated reload (MCHCK based only)
- Added additional LED position

- Preparation for KLL support

- Updated the Scan module API functions (LED and Analog)

- Added LayerIndex data structure

- Made changes to the capabities/macro data structure to specify the capability arg count in the capability list
- Remove the arg count from the result macro struct (as it is redundant)

- Fixed TriggerMacroNum and ResultMacroNum

- Changed macro/capabilities data structure to index capabilities rather than specify function pointers
- Used an 8 bit array, this reduced the max number of capabities to 255
	* Shouldn't be an issue, but this can be addressed if the limit is hit...unlikely though

- Moderate changes to the trigger and result macro data structures
- The debug macro viewers are nearly equivalent to what the main macro processors will do

- Requires special string to be compared with the bootloader and VBAT register file

- More keyboard layouts and enhancements to come :D