To use define GHOST in matrix.h, see example in Scan/CK3

- Includes minor fix for MD1

- See md1Action.kll for usage
- Includes Block/Unblock

- It's possible to get even more, but this is probably as far as I'll go
- PROGMEM is really annoying to use, and makes the code look like ass
- Now the Teensy 2++ should have enough RAM to use PartialMap easily

- Changed static variables to const that should have been const
- Updated CMake files to prepare for MCHCK custom bootloader
- Changed the USB ID numbers and ID number for bootloader
- Only generate DFU or Teensy binary image, not both
- Fixed RAM and FLASH calculator
- Added missing license in delay.c/h (much of it was taken from Teensy source though I've changed a bunch of it)
- Prepared mk20dx.c for upcoming bootloader addition
- mk20dx.h cleanup
- Reduced the MCHCK based flash size for the application image (bootloader changes requires more flash space)
- Fixed bugs in macro.c
- Added keyHold cli command
- Added show pending events debug message for PartialMap macro module

- CLI Debugging options added
- Various bug fixes for the matrix scanning algorithm
- Changed debouncing algorithm

- Cleaned up Macro and USB callback naming
- Added security jumper for automated reload (MCHCK based only)
- Added additional LED position

- Vref of 1.2 V isn't working (may be due to missing setup/hardware)

- Mostly for reference, you shouldn't include it verbatim in your module.

- Code should be working, but much is untested
- All of the old modules will need to update and use the new DefaultMap keymap
- There might still be some naming conflicts with some Scan Modules

- Very small updates to files, mostly modifying to remove name duplications

- Shouldn't affect anything, and will allow for greater buffer clearing control

- HP150 is not ready
- IBMConvertible is ready to start testing

- Better macros are still needed for the clicker
- Current macros should be separated as a sub-module
- No LEDs implement yet
- Caps Lock LED seems to be burnt out...

- Keyboard is fully functional
- LED, Beeper, and keyboard input not yet implemented

- Doesn't work yet

- Not tested yet
- Packet size is large so it's not possible to use Teensy hardware

- Keyboard output fully working
- Not all of the features are implemented yet (input, speaker, or power
  detection)
- There is no plan for mouse support

- Full support (NKRO, provided the USB module can handle it)
- Full LED support (available to the macro modules per input signals)
- Reset/Hold line support
- Handles repeat rate issues (keyboard does not send key updates as most
  keyboards do...)

- Uses USART instead of polling
- Supports two way communication (only 3 commands to the keyboard
  though)
- Kaypro sends data as ASCII, which severely limits the handling of
  modifiers
- No release signal is sent, so even faking modifiers is next to
  impossible outside of Shift and Ctrl
- Includes default QWERTY and Colemak layouts
- Developed a new buffer macro, which will become the basic macro module
  once all the other modules have been ported (much more efficient, as
  it keeps serial scanning schemes serial, and parallel scanning schemes
  such as matrix, that already serialized into a sort of buffer for the
  debouncing evaluation)
- This module is quite efficient, and would be able to handle very
  excessive macro processing in the future.
- If more of the keypboard communication protocol is desired, I have a
  rom dump of the microcontroller (M5L8049)

- Does not output to usb yet
- USART is functionally getting characters from the keyboard and sending
  beep codes and ACK request code (Baud rate properly calculated)
- Uses hard-coded keys for the PC to Keyboard commands (not desireable)
- Keyboard sends ASCII data, which makes doing things like holding
  multiple keys almost impossible to detect (the board isn't NKRO
  anyways, though I've found 8+ key combos that work)

- Caused by too much processing in the converter...
- Easy to fix if I remove the macro engine...

- Commenting cleaned up
- usb_keyboard_debug is not finished yet in terms of cleanup (needs DEBUB_PRINT #ifdef's)
- Added LoadFile script generation
- Formalized KeyIndex and USBKeys data containers
- Split parts of scan_loop into Macro, USB, and main.c
- Added interface to USB modules
- Added interface to Macro modules
- Added proper Debug module enable/disable

- Include option is currently "hacked" and needs to be fixed
- Builds on Linux, but Mac and Windows needs to be tested
- Loader script generation isn't complete

- Added better string handling and canned messages
- Added LED error function
- Moved code around
- Prepared the matrix code for multiple styles of scanning (changed at compile time)

- defaultMap needs to be adjusted
- Modifiers are not yet accounted for when sending keypresses
- keypad needs to be added (detect,debounce, and send)

- Only need to decode a bunch more of the matrix to get the proper key assignments
- All of the infrastructure is in place for decoding like matrices for the teensy