- Removed another key from the latch list to use as a normal key

- Required some small API changes, shouldn't affect any other Scan modules (addition of a parameter)
- Still have the latching annoyances for some of the modifiers
- Swapped Esc and Tilde for convenience
- Removed the old Esc key from the latch list (no one needs 13 latches anyways...)
- Added the control cluster mappings (Insert, Delete, Home, End, PgUp, PgDn)
- All other misc keys are currently un-assigned if a keycap legend doesn't map to anything known
  (e.g. blank keys, 000 and 00 are mapped, but your OS probably doesn't know what they mean :P)

Unfortunately, the protocol annoying, with only 3 keys having Press/Release signals.
Some of the keys were only meant to be pressed once, and do not have repeat functionality.

The current implementation is a bit slow, so some keys may get lost during USB sending.
This is probably fixable, not sure if I want to spend the time on it though.

There is a keyboard input protocol, but I'm not sure of what information can be transmitted to the keyboard.
The terminal does send some information back and forth between the keyboard, but I'm unclear of the purpose, as I can never get any response out of the keyboard.

- HP150 is not ready
- IBMConvertible is ready to start testing

- Uses the matrix module, which is now moderately working now for NKRO diode keyboards

- Fixed final bug regarding key release
- Added LED support calls
- Fixed minor keymapping bug for TAB
- Changed default keymap to Colemak

- Not fully reading for usage, but 90% of the way there for typing.
- Some soldering is required for 2 keys to work properly (Shift and Shift Lock)
- Even when complete, be careful when doing multiple key combos, as the key buffer is only cleared when all general keys are released (all except Shift, Shift Lock, and Code)

- Better macros are still needed for the clicker
- Current macros should be separated as a sub-module
- No LEDs implement yet
- Caps Lock LED seems to be burnt out...

- Keyboard is fully functional
- LED, Beeper, and keyboard input not yet implemented

- Doesn't work yet

- Not tested yet
- Packet size is large so it's not possible to use Teensy hardware

- Typing and modifiers fully working
- Still some features left to implement
  * Stop input
  * Diagnostic test
  * Setting interval before starting repeat rate
  * More comments
  * Handling LED stats

- LEDs are working
- Reset command is working
- Basic typing is working (USB side drops some characters)
- Changing repeat rate is working
- Querying modifiers and LEDs is working
- Initial layouts are complete
- Modifiers are not fully working yet

- Keyboard output fully working
- Not all of the features are implemented yet (input, speaker, or power
  detection)
- There is no plan for mouse support

- Full support (NKRO, provided the USB module can handle it)
- Full LED support (available to the macro modules per input signals)
- Reset/Hold line support
- Handles repeat rate issues (keyboard does not send key updates as most
  keyboards do...)

- Uses USART instead of polling
- Supports two way communication (only 3 commands to the keyboard
  though)
- Kaypro sends data as ASCII, which severely limits the handling of
  modifiers
- No release signal is sent, so even faking modifiers is next to
  impossible outside of Shift and Ctrl
- Includes default QWERTY and Colemak layouts
- Developed a new buffer macro, which will become the basic macro module
  once all the other modules have been ported (much more efficient, as
  it keeps serial scanning schemes serial, and parallel scanning schemes
  such as matrix, that already serialized into a sort of buffer for the
  debouncing evaluation)
- This module is quite efficient, and would be able to handle very
  excessive macro processing in the future.
- If more of the keypboard communication protocol is desired, I have a
  rom dump of the microcontroller (M5L8049)

- Parent module no longer allows for a stand-alone compile
- Added HeathZenith matrix (pinout still needs to be done)
- Updated the HeathZenith keymaps
- Changed the original example matrix.h to matrix_template.h

- Layouts should be changed as per defines in the Scan modules
- Which are then mapped using the macro module (if possible)

- Fixed up basic Macro module (still not to my liking)
- Added the bootloader entry bits
- Added logic for key sequence tracking

- Caused by too much processing in the converter...
- Easy to fix if I remove the macro engine...

- Commenting cleaned up
- usb_keyboard_debug is not finished yet in terms of cleanup (needs DEBUB_PRINT #ifdef's)
- Added LoadFile script generation
- Formalized KeyIndex and USBKeys data containers
- Split parts of scan_loop into Macro, USB, and main.c
- Added interface to USB modules
- Added interface to Macro modules
- Added proper Debug module enable/disable

- Include option is currently "hacked" and needs to be fixed
- Builds on Linux, but Mac and Windows needs to be tested
- Loader script generation isn't complete