USB - General
- Refactored descriptors
- Enabled/Disable USB endpoints
- Added debug flags for special features
- Code cleanup
- Interface count calculation based off of enabled endpoints
- Delayed wTotalLength calculation to simplify descriptor offsets
- Re-ordered endpoints and interfaces
- Added more debug output
- Added usbInitTime to show how long keyboard initialization took
  (Useful when debugging bad init sequences)
- Added function for usb_resume() which takes care of the resume sequence
  * Resume is now only called if packets are starting to timeout

USB - Special Options
- Added enableDeviceRestartOnUSBTimeout
  * A last resort hammer for bad USB Chipsets/OSs, don't use if you can help it
  * Disabled
- Added enableUSBResume
  * Enables host resume wake-up signalling, required to wake a computer from sleep
  * Enabled
- Added enableUSBLowPowerNegotiation
  * Enables power negotiation hack
  * Required to use firmware with an IPad and other hard-limit low-power USB hosts
  * Hasn't been tested with the recent changes
  * Disabled
- Added enableUSBSuspend
  * Enables power down events on host USB bus suspend
  * Enabled

USB - Keyboard
- Attempted to cleanup HID SET_REPORT
  * Works much better
  * Still has an issue under Linux which generates *a lot* of NAKs (initializes quickly regardless)
    + Not present on other keyboards
    + SETUP -> OUT -> IN : This sequence is the problem
    + Specifically during the OUT phase
- Enabled

USB - CDC Virtual Serial Port
- Code cleanup
- Added convenience struct USBCDCLineCoding for easier debugging
- Attempted to cleanup CDC_SET_LING_CODING
  * Works much better
  * Still has an issue under Linux which generates *a lot* of NAKs (initializes quickly regardless)
    + SETUP -> OUT -> IN : This sequence is the problem
    + Specifically during the OUT phase
    + Likely the same issues as HID SET_REPORT
- Enabled

USB - Mouse
- Enabled

USB - Joystick
- Disabled

USB - RawIO
- Initial code, API not used yet
- Disabled

DFU
- Updated load script, now faster

- Somewhat aggresive, may cause restarts if the keyboard/OS hasn't fully intialized the keyboard
- Added GET_IDLE handling and correct usage of SET_IDLE
- Initial implementation of idle send, commented out as it causes issues on Mac OSX for sleeping
  (keyboard has been working without it)
- MacOSX seems to have some sort of data corruption on the USB link, not sure why (other OSs have no issues)
- Cleaned up some code
- Added a longer sleep after the resume sequence to prevent possible issues sending keys too soon
  (may need to be increased more)

Ipad support now seems flaky, though Mac, Windows seems solid.
Init sequence on Linux seems slow, even though there are no errors.

- Maintains a sleep state variable (may be able to use as a signal in the future)
- On the first keypress, hold the RESUME signal for 10 ms (spec says between 1 and 15 ms)
- Removed some messages that were affecting sleep state

- Odd that this went unnoticed for sooooo long
- Fixes Mac OSX issue where keyboard freezes/hangs on a reboot
- Also adding missing code for usbMuxUart

- Each scan module now has a current change callback which passes the available current as a parameter
- No longer attempts to use the max 500 mA immediately, starts with 100 mA then goes to 500 mA after enumeration
- If enumeration fails due to bMaxPower of 500 mA, then attempt again at 100 mA (might also be possible to go even lower to 20 mA in certain cases)
- Now working with the Apple Ipad (no over-power messages)
- Fixed Wake-up behaviour on Apple Ipad (and likely other iOS devices)
- More effecient set_feature/clear_feature handling (device handler)
- Initial power handling via Interconnect (still needs work to get it more dynamic)

- Now enabled by default
- Added protection around remote jumps

- Adds proper flashMode support for all keyboards and microcontrollers (usb and serial)
- flashModeEnabled must be set to 1 otherwise it will only show an error
  * This is on purpose (somewhat dangerous feature as it allows remote flashing)
- Capability cleanup

- Fixed cli reflash mode set
- Cleaned up debugging code
- 4 500 000 baud seems to be reliable
- Fixed master selection (assumes slave node unless USB enumerates)

- Interrupt vector table position fix (affected everything in the firmware)
- Added fault debug messages
- Fixed usbMuxUart

Forgot to pull some files. Fixed those up too.

Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.

- Removing (currently) redundant usbMuxUart capabilities.kll file
- Issues were due to the recent AddModule cmake function addition

- Currently actual detection commented out due to issues

- Not ready yet
- Will require some more changes to Lib/mk20dx.c

- It's possible to get even more, but this is probably as far as I'll go
- PROGMEM is really annoying to use, and makes the code look like ass
- Now the Teensy 2++ should have enough RAM to use PartialMap easily

- Easier to debug USB initialization

- CLI now works with hex or decimal numbers
- Hex requires 0x (technically just x would work too)

- Changed static variables to const that should have been const
- Updated CMake files to prepare for MCHCK custom bootloader
- Changed the USB ID numbers and ID number for bootloader
- Only generate DFU or Teensy binary image, not both
- Fixed RAM and FLASH calculator
- Added missing license in delay.c/h (much of it was taken from Teensy source though I've changed a bunch of it)
- Prepared mk20dx.c for upcoming bootloader addition
- mk20dx.h cleanup
- Reduced the MCHCK based flash size for the application image (bootloader changes requires more flash space)
- Fixed bugs in macro.c
- Added keyHold cli command
- Added show pending events debug message for PartialMap macro module

- Cleaned up Macro and USB callback naming
- Added security jumper for automated reload (MCHCK based only)
- Added additional LED position

- McHCK uses FLL instead of the PLL for USB (startup, not usb init)
- Added optional debug for the pjrc USB module
- Cleaned up compiler flags

- Sending characters to the UART before it's ready would overflow the buffer causing it to hang
- Added a check to make sure the interface is ready before starting to send characters
- Removed the incorrect check for the usbMuxUart to make sure usb is ready before sending over the uart

- The UART out may be useful for Bluetooth keyboards at some point

- Refactored pjrc USB (definitions to the .h file)

- Mostly for reference, you shouldn't include it verbatim in your module.

- Code should be working, but much is untested
- All of the old modules will need to update and use the new DefaultMap keymap
- There might still be some naming conflicts with some Scan Modules

- Functions themselves are working
- LED functionality has never actually worked, still doesn't :P
- Should be easy to test NKRO USB now

- Includes serial putchar and getchar cleanup (overall)
- Moved avr-capsense to DPH (renaming)
- Basic cleanup for including CLI on the avr architecture

- reset   -> Simulates power cycle (Not yet compatible with AVR)
- reload  -> Sets the device into firmware reload mode
- led     -> Toggles the error LED
- version -> Displays detailed version information (additions to CMake files was necessary, might have broken Windows builds...)

* Initial cli code

- Hardcoded strobe lines (required to make the hardware less noisy)
- Updated debug code

- CDC Output seems to be working
- USB Keyboard output has not been tested, but is "ready"
- UART and Timers have not been tested, or fully utilized
- Issues using Timer 0
- Initial template for MBC-55X Scan module (only module currently compatible with the arm build)
- Updated the interface to the AVR usb module for symmetry with the ARM usb module
- Much gutting was done to the Teensy 3 usb keyboard module, though not in an ideal state yet

- Very small updates to files, mostly modifying to remove name duplications

- Abstracted USB Module
- Abstracted compiler specific includes for Scan, Macro, Debug, and USB modules
- Updated CMake build files to support changes
- Added abstractions necessary to main.c as well as a compiler specific include file

- Required some small API changes, shouldn't affect any other Scan modules (addition of a parameter)
- Still have the latching annoyances for some of the modifiers
- Swapped Esc and Tilde for convenience
- Removed the old Esc key from the latch list (no one needs 13 latches anyways...)
- Added the control cluster mappings (Insert, Delete, Home, End, PgUp, PgDn)
- All other misc keys are currently un-assigned if a keycap legend doesn't map to anything known
  (e.g. blank keys, 000 and 00 are mapped, but your OS probably doesn't know what they mean :P)

- Typing and modifiers fully working
- Still some features left to implement
  * Stop input
  * Diagnostic test
  * Setting interval before starting repeat rate
  * More comments
  * Handling LED stats

- Fixed up basic Macro module (still not to my liking)
- Added the bootloader entry bits
- Added logic for key sequence tracking

- Caused by too much processing in the converter...
- Easy to fix if I remove the macro engine...

- Commenting cleaned up
- usb_keyboard_debug is not finished yet in terms of cleanup (needs DEBUB_PRINT #ifdef's)
- Added LoadFile script generation
- Formalized KeyIndex and USBKeys data containers
- Split parts of scan_loop into Macro, USB, and main.c
- Added interface to USB modules
- Added interface to Macro modules
- Added proper Debug module enable/disable