By default:
DebounceThrottleDiv = 0;
This is the default infinity behaviour right now (may be changed in the future).

Increasing DebounceThrottleDiv will increase the scan rate divider.
DebounceThrottleDiv = 1; # Scans half as much
DebounceThrottleDiv = 2; # Scans a quarter as much
DebounceThrottleDiv = 3; # Scans an eigth as much
etc.

For ARM based uCs (like the Infinity) the maximum divider is 32.

- If dfu-suffix is not found, a warning is given and the binary is not signed
- Unsigned binaries are still ok with the latest version of dfu-util

- Pressed key will remain on the same layer until released
  regardless of the layer changes that happen in the meantime

README package name correction

Signed-off-by: Andrei Thorp <[email protected]>

Can be specified from any .kll file

DebounceDivThreshold = 0xFFFFFFFF
Sets to max debounce, default is 0xFFFF.
The 0xFFFFFFFF is about a 2x longer debounce
The max requires more ram (as it uses 32 bit variables instead of 16).

Added support for submodule capabilities files.

clear buffers on Consumer/System Control release

fixes #15

- Removing old cli arguments

Add instructions for using Homebrew

- Displays all of the bytes sent via USB
- Different display mode for NKRO and Boot modes

(Requires a kll update to work correctly)

Check for dfu-util and screen before using them. Also aborts if
teensy_loader_cli compilation fails.

Uses the type builtin to determine if a command exists. See here:
https://gist.github.com/sdelmas/7377271

Convert README to Markdown format.

This makes it render nicely on GitHub's website, as well as having a
consistent plain-text format that should be familiar to many.

- Fastload option (allows for remote flashing)
- Autoscreen option initiates screen after successfully loading the firmware

- Currently actual detection commented out due to issues

cmake -DREFRESH_KLL=1 ..

- Added AddModule CMake function which simplifies specifying module requirements

- When loading a garbage image onto the device, the chip hangs
  and refuses to jump to the bootloader and start dfu

Fix
- Check if chip was in locked state and jump to dfu
- Check if watchdog timer fired and jump to dfu

- Currently builds larger binaries than gcc (RAM)

- Not ready yet
- Will require some more changes to Lib/mk20dx.c

Fix an off by one error causing most keys to be shifted one to the
right, due to the missing backslash (\) key in the top row.

Fix an off by one error causing most keys to be shifted one to the
right, due to the missing backslash (\) key in the top row.

Latch now activates on key release, and deactivates on next key release.

- Had to re-write descriptor to support Windows 8.1 while still working with Mac OSX
- NKRO keyboard is now more bandwidth intensive as all the keys must be updated at the same time
  (due to 8.1 bug in the HID spec)