Write whole debug cli command to history

Previously the command was being modified in place in order
to find the command name. This was happening before saving
to the history.

Fixes #70

Exit quickly when cmake or make fail

The compilation process itself doesn't take very long, but it's weird to
let it continue trying to build when we've encountered an error worthy
of changing cmake/make's return codes. This gives clear indication of a
failed build as the last line of the script's output.

- Requires kll compiler update
- Includes descriptor update to handle new consumer control codes

- Works for all nodes in chain
- Synchronized to 30 ms update rate (required for ISSI chip)
  * Interconnect cannot handle full update speed from Scan module
  * Though it should be able to handle quite a bit more than 30 ms updates

- Rx buffers weren't fast enough, had to use DMA :D
- Basic LCD remote capabilities are working, single node
- Multi-node broadcast seems to have a bug still
- DMA ring buffer allowed for significant processing simplification
  * There is an overrun risk, but the buffer is large and generally there isn't too much data being sent (just very quickly)
- Split out LCD layer stack capability into itself and an "exact" version used for updating remote nodes

Fixed typo

- Now enabled by default
- Added protection around remote jumps

- 6 modes
  * Single led: decrease, increase, set
  * All leds: decrease, increase, set
- Currently update speed limited to once every 30 ms
  * Likely an I2C driver or ISSI limitation preventing even faster updates

- Implementation was completely wrong (has never worked properly)
- Now working in both NKRO and 6KRO modes
- Added more debugging code if things go wrong again

- Reverting old fix that no longer seems relevant after numerous recent USB fixes

- Also conditionally refresh the lcd screen if enabled /w interconnect
  (Not the ideal way to update, but the only way with the current KLL version)

- Requires kll update
- Including udev id update

- Includes minor fix for MD1

- Layers were stacked correctly, but evaluated backwards

- Adds proper flashMode support for all keyboards and microcontrollers (usb and serial)
- flashModeEnabled must be set to 1 otherwise it will only show an error
  * This is on purpose (somewhat dangerous feature as it allows remote flashing)
- Capability cleanup

- Media keys tested working on Linux/Windows/Mac (use Consumer control)
- Fixed enumeration delays
- Fixed virtual serial port configuration issues
- Fixed GET_REPORT and SET_REPORT
- Added intial descriptors and endpoints for Mouse and Joystick devices
- Split out the consumer and system control endpoint
- Added more fault debugging messages
- Added interface names to endpoints (visible in Windows Device Manager)
- Added KLL define for keyboard locale

- Requires lcdFuncMap.kll instead of stdFuncMap.kll

- See md1Action.kll for usage
- Includes Block/Unblock

- Includes fix for over-range ScanCodes (would cause hard faults)
- Updated some documentation
- Requires recent kll compiler for the layout

- Supports up to 255 slave nodes (you'll run into ScanCode limitations before then)
- Requires most recent kll compiler update
- Additional debugging output and stats counters
- Noise and parity checking
- Fixed TxFIFO issue when sending buffers larger than the FIFO
- Cleaned up defaultMap.kll
- Added ScanCode caching (reduces interconnect traffic significantly)
- Interconnect module code is conditionally compiled into PartialMap module if required

- Still some issues
- Will require some changes to MatrixARM and PartialMap
  * Currently state information is passed around too frequently
  * Needs to be reduced to state changes only

- Required updates to CMake in order to handle the multi-layer BaseMaps

- Adds override functionality in main module

- Fixed cli reflash mode set
- Cleaned up debugging code
- 4 500 000 baud seems to be reliable
- Fixed master selection (assumes slave node unless USB enumerates)