- Changed static variables to const that should have been const
- Updated CMake files to prepare for MCHCK custom bootloader
- Changed the USB ID numbers and ID number for bootloader
- Only generate DFU or Teensy binary image, not both
- Fixed RAM and FLASH calculator
- Added missing license in delay.c/h (much of it was taken from Teensy source though I've changed a bunch of it)
- Prepared mk20dx.c for upcoming bootloader addition
- mk20dx.h cleanup
- Reduced the MCHCK based flash size for the application image (bootloader changes requires more flash space)
- Fixed bugs in macro.c
- Added keyHold cli command
- Added show pending events debug message for PartialMap macro module

- McHCK uses FLL instead of the PLL for USB (startup, not usb init)
- Added optional debug for the pjrc USB module
- Cleaned up compiler flags

- Added executable detection script
- Build will still work fine if ctags isn't installed

- Tried to add auto cmake reset...so far unsuccessful
- Ported MBC-55X (was used to test compilers)
- Disabled in-source builds, to prevent CMake from shooting itself in the foot.

- Uses an internal database of microcontroller sizes

- Only one file to edit now
- Compiler architecture automatically detected based off of chip target

- Currently only Linux tested.

- This is a patched version to work with Teensy 3.1 (current version on the website doesn't work)
- "Should" work with OS's other than Linux, but hasn't been tested

- Code should be working, but much is untested
- All of the old modules will need to update and use the new DefaultMap keymap
- There might still be some naming conflicts with some Scan Modules

- Includes serial putchar and getchar cleanup (overall)
- Moved avr-capsense to DPH (renaming)
- Basic cleanup for including CLI on the avr architecture

- reset   -> Simulates power cycle (Not yet compatible with AVR)
- reload  -> Sets the device into firmware reload mode
- led     -> Toggles the error LED
- version -> Displays detailed version information (additions to CMake files was necessary, might have broken Windows builds...)

* Initial cli code

- Hardcoded strobe lines (required to make the hardware less noisy)
- Updated debug code

- Adding "template" keymap
- Removed "stray" functions, variables
- Cleaned up warnings
- Now builds
- Added buffered macro integration (rather than dealing with USB directly)
- Updated the print messages to use the Kiibohd print header

TODO
- Add generic matrix integration (this will require some changes to the matrix code)
- Add more comments...lots more
- Clean up dead code

- Also a bit of general house-keeping

- Had to add the iSerialNumber parameter to the AVR USB descriptor
- Removed a faulty pack command for avr-gcc that is not required

- Defined Manufacturer name
- Product name now references each of the selected modules
- Serial number refers to the last commit date, branch, and whether modified since the last commit

- All modules have a default avr compatibilty right now (since that is what they were developed on)
- As modules get tested and added, arm support has to be turned on in the respective setup.cmake file

- CDC Output seems to be working
- USB Keyboard output has not been tested, but is "ready"
- UART and Timers have not been tested, or fully utilized
- Issues using Timer 0
- Initial template for MBC-55X Scan module (only module currently compatible with the arm build)
- Updated the interface to the AVR usb module for symmetry with the ARM usb module
- Much gutting was done to the Teensy 3 usb keyboard module, though not in an ideal state yet

- Tested with the AVR builds
- Partially tested with basic ARM test builds

- HP150 is not ready
- IBMConvertible is ready to start testing

- Uses the matrix module, which is now moderately working now for NKRO diode keyboards

- Not fully reading for usage, but 90% of the way there for typing.
- Some soldering is required for 2 keys to work properly (Shift and Shift Lock)
- Even when complete, be careful when doing multiple key combos, as the key buffer is only cleared when all general keys are released (all except Shift, Shift Lock, and Code)

- Doesn't work yet

- Not tested yet
- Packet size is large so it's not possible to use Teensy hardware

- Fixed key repeat rate issues
- Added the recent function additions to the scan module API

- LEDs are working
- Reset command is working
- Basic typing is working (USB side drops some characters)
- Changing repeat rate is working
- Querying modifiers and LEDs is working
- Initial layouts are complete
- Modifiers are not fully working yet

- Full support (NKRO, provided the USB module can handle it)
- Full LED support (available to the macro modules per input signals)
- Reset/Hold line support
- Handles repeat rate issues (keyboard does not send key updates as most
  keyboards do...)

- Uses USART instead of polling
- Supports two way communication (only 3 commands to the keyboard
  though)
- Kaypro sends data as ASCII, which severely limits the handling of
  modifiers
- No release signal is sent, so even faking modifiers is next to
  impossible outside of Shift and Ctrl
- Includes default QWERTY and Colemak layouts
- Developed a new buffer macro, which will become the basic macro module
  once all the other modules have been ported (much more efficient, as
  it keeps serial scanning schemes serial, and parallel scanning schemes
  such as matrix, that already serialized into a sort of buffer for the
  debouncing evaluation)
- This module is quite efficient, and would be able to handle very
  excessive macro processing in the future.
- If more of the keypboard communication protocol is desired, I have a
  rom dump of the microcontroller (M5L8049)

- Does not output to usb yet
- USART is functionally getting characters from the keyboard and sending
  beep codes and ACK request code (Baud rate properly calculated)
- Uses hard-coded keys for the PC to Keyboard commands (not desireable)
- Keyboard sends ASCII data, which makes doing things like holding
  multiple keys almost impossible to detect (the board isn't NKRO
  anyways, though I've found 8+ key combos that work)

- Parent module no longer allows for a stand-alone compile
- Added HeathZenith matrix (pinout still needs to be done)
- Updated the HeathZenith keymaps
- Changed the original example matrix.h to matrix_template.h

- Includes new "table pinning" setup (much easier to understand)
- Matrix layouts will be split into their own dependent modules later
- Changed the HID Raw view id (too many teensy devices on this
  computer...)
- Moved the macro processing outside of the usb timer signal
  (this will be slower overall, but will result in more consistant
  behaviour)

- Caused by too much processing in the converter...
- Easy to fix if I remove the macro engine...

- Commenting cleaned up
- usb_keyboard_debug is not finished yet in terms of cleanup (needs DEBUB_PRINT #ifdef's)
- Added LoadFile script generation
- Formalized KeyIndex and USBKeys data containers
- Split parts of scan_loop into Macro, USB, and main.c
- Added interface to USB modules
- Added interface to Macro modules
- Added proper Debug module enable/disable

- Providing HEAD_DIR variable that can be prepended to refer to the top of the source directory

- Include option is currently "hacked" and needs to be fixed
- Builds on Linux, but Mac and Windows needs to be tested
- Loader script generation isn't complete