di0ib
/
tmk_keyboard_custom
Beobachten 1
Favorisieren 0
Fork 0
Code Releases 0 Aktivität
Du kannst nicht mehr als 25 Themen auswählen Themen müssen mit entweder einem Buchstaben oder einer Ziffer beginnen. Sie können Bindestriche („-“) enthalten und bis zu 35 Zeichen lang sein.
Dieses Repo ist archiviert. Du kannst Dateien sehen und es klonen, kannst aber nicht pushen oder Issues/Pull-Requests öffnen.
1377 Commits
16 Branches
Branch: master
Branches Tags
${ item.name }
Erstelle Branch ${ searchTerm }
von „master“
${ noResults }
tmk_keyboard_custom/converter/xt_usb
Ethan Apodaca bafb746485 Update XT converter readme. vor 8 Jahren
..
Makefile Codes appear to be detected correctly, the break codes are broken. vor 8 Jahren
README.md Update XT converter readme. vor 8 Jahren
config.h Update config.h vor 8 Jahren
keymap_common.c Codes appear to be detected correctly, the break codes are broken. vor 8 Jahren
keymap_common.h Codes appear to be detected correctly, the break codes are broken. vor 8 Jahren
keymap_jis.c Codes appear to be detected correctly, the break codes are broken. vor 8 Jahren
keymap_plain.c Codes appear to be detected correctly, the break codes are broken. vor 8 Jahren
keymap_spacefn.c Codes appear to be detected correctly, the break codes are broken. vor 8 Jahren
led.c Codes appear to be detected correctly, the break codes are broken. vor 8 Jahren
matrix.c Mostly working. Is unstable, will emit bad codes after a while. vor 8 Jahren

README.md

XT to USB keyboard converter

This firmware converts XT keyboard protocol to USB.(It supports Scan Code Set 1.)

Connect Wires

In case of Teensy2.0(ATMega32U4):

  1. Connect Vcc and GND.
  2. Connect Clock and Data line.
    • Interrupt: Clock is on PD1 and Data on PD0.(Recommended. Soarer’s converter compatible)
  3. Optionally you need pull-up resistor. 1K-10K Ohm is OK.

To change pin configuration edit config.h and Makefile.

Build Firmware

For PJRC Teensy just run make:

$ make clean
$ make

To select keymap:

$ make clean
$ make KEYMAP=[plain|jis|spacefn|...]

After that you will find HEX file xt_usb_lufa.hex in current directory.

Keymap

Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named keymap_<name>.c and see keymap document(you can find in README.md of top directory) and existent keymap files.