di0ib
/
tmk_keyboard_custom
Suivre 1
Ajouter aux favoris 0
Bifurcation 0
Code Versions 0 Activité
Vous ne pouvez pas sélectionner plus de 25 sujets Les noms de sujets doivent commencer par une lettre ou un nombre, peuvent contenir des tirets ('-') et peuvent comporter jusqu'à 35 caractères.
Ce dépôt est archivé. Vous pouvez voir les fichiers et le cloner, mais vous ne pouvez pas pousser ni ouvrir de ticket/demande d'ajout.
1377 Révisions
16 Branches
Branche: master
Branches Tags
${ item.name }
Créer la branche ${ searchTerm }
de 'master'
${ noResults }
tmk_keyboard_custom/converter/xt_usb
Ethan Apodaca bafb746485 Update XT converter readme. il y a 8 ans
..
Makefile Codes appear to be detected correctly, the break codes are broken. il y a 8 ans
README.md Update XT converter readme. il y a 8 ans
config.h Update config.h il y a 8 ans
keymap_common.c Codes appear to be detected correctly, the break codes are broken. il y a 8 ans
keymap_common.h Codes appear to be detected correctly, the break codes are broken. il y a 8 ans
keymap_jis.c Codes appear to be detected correctly, the break codes are broken. il y a 8 ans
keymap_plain.c Codes appear to be detected correctly, the break codes are broken. il y a 8 ans
keymap_spacefn.c Codes appear to be detected correctly, the break codes are broken. il y a 8 ans
led.c Codes appear to be detected correctly, the break codes are broken. il y a 8 ans
matrix.c Mostly working. Is unstable, will emit bad codes after a while. il y a 8 ans

README.md

XT to USB keyboard converter

This firmware converts XT keyboard protocol to USB.(It supports Scan Code Set 1.)

Connect Wires

In case of Teensy2.0(ATMega32U4):

  1. Connect Vcc and GND.
  2. Connect Clock and Data line.
    • Interrupt: Clock is on PD1 and Data on PD0.(Recommended. Soarer’s converter compatible)
  3. Optionally you need pull-up resistor. 1K-10K Ohm is OK.

To change pin configuration edit config.h and Makefile.

Build Firmware

For PJRC Teensy just run make:

$ make clean
$ make

To select keymap:

$ make clean
$ make KEYMAP=[plain|jis|spacefn|...]

After that you will find HEX file xt_usb_lufa.hex in current directory.

Keymap

Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named keymap_<name>.c and see keymap document(you can find in README.md of top directory) and existent keymap files.