Archived
1
0
Commit Graph

52 Commits

Author SHA1 Message Date
Jacob Alexander
9309889fad Removing NKRO Mode requirement for System Control and Consumer Control Keys (Media Keys)
- In general this shouldn't cause any issues
- BIOSs should ignore
- OSs should happily use

Still, this masks the EHCI hand-off that Windows and Linux are starting to do.
A better solution is needed to force devices to re-negotiate their mode.
2016-07-28 19:55:36 -07:00
Jacob Alexander
358d480ea9 Major USB update, fixes most (if not all) known issues
USB - General
- Refactored descriptors
- Enabled/Disable USB endpoints
- Added debug flags for special features
- Code cleanup
- Interface count calculation based off of enabled endpoints
- Delayed wTotalLength calculation to simplify descriptor offsets
- Re-ordered endpoints and interfaces
- Added more debug output
- Added usbInitTime to show how long keyboard initialization took
  (Useful when debugging bad init sequences)
- Added function for usb_resume() which takes care of the resume sequence
  * Resume is now only called if packets are starting to timeout

USB - Special Options
- Added enableDeviceRestartOnUSBTimeout
  * A last resort hammer for bad USB Chipsets/OSs, don't use if you can help it
  * Disabled
- Added enableUSBResume
  * Enables host resume wake-up signalling, required to wake a computer from sleep
  * Enabled
- Added enableUSBLowPowerNegotiation
  * Enables power negotiation hack
  * Required to use firmware with an IPad and other hard-limit low-power USB hosts
  * Hasn't been tested with the recent changes
  * Disabled
- Added enableUSBSuspend
  * Enables power down events on host USB bus suspend
  * Enabled

USB - Keyboard
- Attempted to cleanup HID SET_REPORT
  * Works much better
  * Still has an issue under Linux which generates *a lot* of NAKs (initializes quickly regardless)
    + Not present on other keyboards
    + SETUP -> OUT -> IN : This sequence is the problem
    + Specifically during the OUT phase
- Enabled

USB - CDC Virtual Serial Port
- Code cleanup
- Added convenience struct USBCDCLineCoding for easier debugging
- Attempted to cleanup CDC_SET_LING_CODING
  * Works much better
  * Still has an issue under Linux which generates *a lot* of NAKs (initializes quickly regardless)
    + SETUP -> OUT -> IN : This sequence is the problem
    + Specifically during the OUT phase
    + Likely the same issues as HID SET_REPORT
- Enabled

USB - Mouse
- Enabled

USB - Joystick
- Disabled

USB - RawIO
- Initial code, API not used yet
- Disabled

DFU
- Updated load script, now faster
2016-05-31 00:40:10 -07:00
Jacob Alexander
92b3b5081b Adding auto-restart support whenever USB gets into an odd state
- Somewhat aggresive, may cause restarts if the keyboard/OS hasn't fully intialized the keyboard
- Added GET_IDLE handling and correct usage of SET_IDLE
- Initial implementation of idle send, commented out as it causes issues on Mac OSX for sleeping
  (keyboard has been working without it)
- MacOSX seems to have some sort of data corruption on the USB link, not sure why (other OSs have no issues)
- Cleaned up some code
- Added a longer sleep after the resume sequence to prevent possible issues sending keys too soon
  (may need to be increased more)

Ipad support now seems flaky, though Mac, Windows seems solid.
Init sequence on Linux seems slow, even though there are no errors.
2016-05-27 01:26:04 -07:00
José Luis Salvador Rufo
0174e1e6ab
Adding toggleKbdProtocol capability 2016-05-26 13:06:12 +02:00
Jacob Alexander
ba58010a75 Adding proper remote wake-up support
- Maintains a sleep state variable (may be able to use as a signal in the future)
- On the first keypress, hold the RESUME signal for 10 ms (spec says between 1 and 15 ms)
- Removed some messages that were affecting sleep state
2016-05-17 01:18:14 -07:00
Jacob Alexander
18aef02a1f Adding relative movement mouse key support
- Still very basic (lots of room for improvement)
- Capability format will likely change at some point
- 16 bit movement control, however repeat rate limits usability (will need KLL 0.4 to make better)
2016-03-21 23:05:41 -07:00
Jacob Alexander
3c9a97d51a Adding basic mouse button support
- Full Mouse support will have to wait for KLL 0.6
  * This will include dynamic HID descriptor generation for many wheels and axis depending on the KLL needs
- HID descriptor is currently limited to 8 buttons
- Technically mouse movement also works (tested by accident), but it's disable for now (needs some API thought)

- Adding additional udev rules
- Added KRO mode default define
2016-03-21 00:51:51 -07:00
Jacob Alexander
46765e85c5 Adding dynamic USB power support
- Each scan module now has a current change callback which passes the available current as a parameter
- No longer attempts to use the max 500 mA immediately, starts with 100 mA then goes to 500 mA after enumeration
- If enumeration fails due to bMaxPower of 500 mA, then attempt again at 100 mA (might also be possible to go even lower to 20 mA in certain cases)
- Now working with the Apple Ipad (no over-power messages)
- Fixed Wake-up behaviour on Apple Ipad (and likely other iOS devices)
- More effecient set_feature/clear_feature handling (device handler)
- Initial power handling via Interconnect (still needs work to get it more dynamic)
2016-02-21 19:56:52 -08:00
Jacob Alexander
59d425ccfe Adding jump to bootloader key
- Now enabled by default
- Added protection around remote jumps
2015-10-11 22:07:11 -07:00
Jacob Alexander
9c52fb32fa Fixing default ErgoDox layout and adding FlashMode button
- Adds proper flashMode support for all keyboards and microcontrollers (usb and serial)
- flashModeEnabled must be set to 1 otherwise it will only show an error
  * This is on purpose (somewhat dangerous feature as it allows remote flashing)
- Capability cleanup
2015-08-21 19:43:45 -07:00
Jacob Alexander
55d03f448e UARTConnect enumeration working!
- Fixed cli reflash mode set
- Cleaned up debugging code
- 4 500 000 baud seems to be reliable
- Fixed master selection (assumes slave node unless USB enumerates)
2015-07-18 18:53:21 -07:00
Jacob Alexander
fd25312f4f Adding None capability.
- Required for 0.3b update of the KLL compiler.
2015-05-02 14:29:27 -07:00
Rowan Decker
68f357dceb Fix whitespace pt2
Forgot to pull some files. Fixed those up too.
2015-03-08 21:07:59 -07:00
Rowan Decker
2922fce0f7 Merge remote-tracking branch 'upstream/master' 2015-03-08 20:17:39 -07:00
Rowan Decker
1392571bd7 Fix whitespace
Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-08 18:40:01 -07:00
Victor Luft
595319c511 clear buffers on Consumer/System Control release
fixes #15
2015-02-23 18:29:01 -08:00
Jacob Alexander
7597fea053 Adding outputDebug command
- Displays all of the bytes sent via USB
- Different display mode for NKRO and Boot modes
2015-02-21 13:06:28 -08:00
Jacob Alexander
9e3d3aaca4 Initial code for USB cable detection
- Currently actual detection commented out due to issues
2015-02-09 13:21:23 -08:00
Jacob Alexander
f5a1e1bcf5 Preparing for mk20dx256vlh7
- Not ready yet
- Will require some more changes to Lib/mk20dx.c
2014-12-31 17:13:44 -08:00
Jacob Alexander
504058bdb1 Fixing sequences (after NKRO HID descriptor re-design). 2014-11-12 23:33:28 -08:00
Jacob Alexander
a7b1d94465 Fixing NKRO modifier bug
- Modifier byte was being cleared after each send (needed for Boot Mode only)
2014-11-10 22:50:54 -08:00
Jacob Alexander
11fb8bd77d Fixing Linux NKRO Delete bug
- Fixed descriptor to not include USB Code 156 (Clear)
- This USB Code affects repeating Delete
2014-11-10 21:02:25 -08:00
Jacob Alexander
2be0d1393b USB Macro Output sequences now working!
- Tested both with Boot and NKRO modes
2014-10-27 00:26:17 -07:00
Jacob Alexander
6e4c28ef84 HUGE AVR RAM optimization (~28%).
- It's possible to get even more, but this is probably as far as I'll go
- PROGMEM is really annoying to use, and makes the code look like ass
- Now the Teensy 2++ should have enough RAM to use PartialMap easily
2014-10-02 22:09:34 -07:00
Jacob Alexander
0cbfe53794 Fixed Linux NKRO bitmap bug.
- Thanks hasu for pointing it out
- Keycode 50 is problematic under Linux, so removing (it's a duplicate keycode anyways)
2014-10-02 01:40:14 -07:00
Jacob Alexander
bba9a1c973 Adding NKRO and Boot mode capabilities.
- When changing the mode, a key buffer flush is required (might confuse the OS temporarily)
2014-10-01 23:47:26 -07:00
Jacob Alexander
ab7351b482 USB NKRO working for ARM!
- Setting NKRO mode as default (up to bios to disable)
2014-09-28 17:24:52 -07:00
Jacob Alexander
ed9abf88a3 Preparing ARM for USB NKRO
- API changes from the AVR NKRO support
2014-09-21 16:29:53 -07:00
Jacob Alexander
9f6be5794b Adding NKRO support to AVR/DPH.
- NKRO for USB Codes 4 to 164, 176 to 221 and modifiers
- Added System Control support codes 129 to 183
- Added Consumer Control support codes 32 to 668
2014-09-21 11:55:37 -07:00
Jacob Alexander
97b514a9d4 Fixing USB send rate.
- Only send USB events when something changes (rather than every ms)
2014-09-19 19:11:37 -07:00
Jacob Alexander
733a9f26b6 DPH controller now working with macros/layers
- Still working on USB NKRO
2014-09-16 11:42:50 -07:00
Jacob Alexander
c169097ccf Fixing release state for keys
- Layers were not disabling because function was only called on press/hold
- Disabled layer shift function on key hold
- Fixed the press/hold/release states for other layer capabilities and USB code send
2014-09-10 20:53:30 -07:00
Jacob Alexander
d6d792fdf9 Changing decToInt to numToInt (adds support for Hex number interpreter)
- CLI now works with hex or decimal numbers
- Hex requires 0x (technically just x would work too)
2014-08-16 12:07:25 -07:00
Jacob Alexander
eabb1c546a Fixing RAM calculator and reduced actual SRAM usage
- Changed static variables to const that should have been const
- Updated CMake files to prepare for MCHCK custom bootloader
- Changed the USB ID numbers and ID number for bootloader
- Only generate DFU or Teensy binary image, not both
- Fixed RAM and FLASH calculator
- Added missing license in delay.c/h (much of it was taken from Teensy source though I've changed a bunch of it)
- Prepared mk20dx.c for upcoming bootloader addition
- mk20dx.h cleanup
- Reduced the MCHCK based flash size for the application image (bootloader changes requires more flash space)
- Fixed bugs in macro.c
- Added keyHold cli command
- Added show pending events debug message for PartialMap macro module
2014-08-15 10:49:44 -07:00
Jacob Alexander
2f7e3cb117 Adding generic layerToggle and USB Key Output capabilities.
- Macros and Layers are, code-wise, feature complete
2014-08-07 20:03:39 -07:00
Jacob Alexander
d6345c307f Initial MatrixARM implementation
- Cleaned up Macro and USB callback naming
- Added security jumper for automated reload (MCHCK based only)
- Added additional LED position
2014-08-01 01:26:25 -07:00
Jacob Alexander
8eba0ae354 Adding McHCK flash reload function and some cleanup.
- Requires special string to be compared with the bootloader and VBAT register file
2014-07-19 09:21:35 -07:00
Jacob Alexander
54c11ebd07 McHCK USB WORKS!!
- McHCK uses FLL instead of the PLL for USB (startup, not usb init)
- Added optional debug for the pjrc USB module
- Cleaned up compiler flags
2014-07-15 00:28:12 -07:00
Jacob Alexander
6f563bdc9f Initial code for ARM UART output module (mainly for CLI) 2014-06-28 13:55:25 -07:00
Jacob Alexander
acf8cb979c Initial work for McHCK mk20dx128vlf5 port. 2014-06-28 13:55:25 -07:00
Jacob Alexander
8a66563622 Preparing from initial AVR USB NKRO support.
- Refactored pjrc USB (definitions to the .h file)
2014-06-09 23:01:32 -07:00
Jacob Alexander
4c76357912 CLI Formatting cleanup. 2014-04-19 11:31:43 -07:00
Jacob Alexander
8ee8e3cb55 Adding analog.c lib from teensyduino.
- Mostly for reference, you shouldn't include it verbatim in your module.
2014-04-12 21:13:37 -07:00
Jacob Alexander
9d423a64a8 Major code cleanup and preparation for PartialMap Macro Module
- Code should be working, but much is untested
- All of the old modules will need to update and use the new DefaultMap keymap
- There might still be some naming conflicts with some Scan Modules
2014-04-06 11:49:27 -07:00
Jacob Alexander
f3e22fb242 Adding the CLI commands to the USB output module.
- Functions themselves are working
- LED functionality has never actually worked, still doesn't :P
- Should be easy to test NKRO USB now
2014-04-01 01:16:53 -07:00
Jacob Alexander
15ec4ff71c Adding CLI and CDC Serial support for Teensy 2.0 and Teensy 2.0++
- Includes serial putchar and getchar cleanup (overall)
- Moved avr-capsense to DPH (renaming)
- Basic cleanup for including CLI on the avr architecture
2014-03-31 01:07:48 -07:00
Jacob Alexander
b2e237f368 Preparing Teensy 3.1 and CLI merge for DPH controller code. 2014-03-22 14:32:06 -07:00
Jacob Alexander
8263589e7e Finished USB for Teensy 3.1 (Now 3.1 compatible!) 2014-03-22 14:14:23 -07:00
Jacob Alexander
3fa9c16c04 File and macro modifications for supporting Teensy 3.1 2014-03-22 14:14:23 -07:00
Jacob Alexander
6ac1482862 Added more CLI commands.
- reset   -> Simulates power cycle (Not yet compatible with AVR)
- reload  -> Sets the device into firmware reload mode
- led     -> Toggles the error LED
- version -> Displays detailed version information (additions to CMake files was necessary, might have broken Windows builds...)
2014-03-22 14:11:49 -07:00