Archived
1
0
Commit Graph

78 Commits

Author SHA1 Message Date
Jacob Alexander
5df7b55391 Adding compiler change detection.
- Tried to add auto cmake reset...so far unsuccessful
- Ported MBC-55X (was used to test compilers)
- Disabled in-source builds, to prevent CMake from shooting itself in the foot.
2014-04-19 01:51:25 -07:00
Jacob Alexander
a6e76d4fac Added better formatting for debugging code. 2014-04-17 00:34:27 -07:00
Jacob Alexander
c858078fde Added support for IBM 50key, better DPH debug, cleanup
- Strobe lines for IBM 50key
- Added CLI debugging for DPH, both per press and overall sense table
- Code cleanup (mostly just removal)
2014-04-17 00:11:36 -07:00
Jacob Alexander
c24f86b0ea Adding example CLI command to DPH module. 2014-04-16 00:20:45 -07:00
Jacob Alexander
bb9c009586 DPH Scan Module now compiles with recent architecture cleanups. 2014-04-16 00:15:09 -07:00
Jacob Alexander
c905bfdebf ADC0 is now working on Teensy 3.1. 2014-04-14 23:59:41 -07:00
Jacob Alexander
36c0b5f417 Adding initial code for ADC1 on Teensy 3.1 (and 3.0).
- To use the second ADC just specify ADC2 for all the commands.
2014-04-13 23:40:06 -07:00
Jacob Alexander
c25ded384f ADCTest DAC support for Teensy 3.1
- Vref of 1.2 V isn't working (may be due to missing setup/hardware)
2014-04-12 23:10:39 -07:00
Jacob Alexander
8ee8e3cb55 Adding analog.c lib from teensyduino.
- Mostly for reference, you shouldn't include it verbatim in your module.
2014-04-12 21:13:37 -07:00
Jacob Alexander
50d1f8c7e6 Updating Cygwin build environment for AVR and ARM. 2014-04-09 20:06:19 -07:00
Jacob Alexander
9d423a64a8 Major code cleanup and preparation for PartialMap Macro Module
- Code should be working, but much is untested
- All of the old modules will need to update and use the new DefaultMap keymap
- There might still be some naming conflicts with some Scan Modules
2014-04-06 11:49:27 -07:00
Jacob Alexander
15ec4ff71c Adding CLI and CDC Serial support for Teensy 2.0 and Teensy 2.0++
- Includes serial putchar and getchar cleanup (overall)
- Moved avr-capsense to DPH (renaming)
- Basic cleanup for including CLI on the avr architecture
2014-03-31 01:07:48 -07:00
Jacob Alexander
1accaf36cc Adding new kishsaver strobe map for new PCB revision 2014-01-12 11:39:25 -08:00
Jacob Alexander
909f20a937 Adding more USB codes and code cleanup 2014-01-12 11:27:10 -08:00
Jacob Alexander
61e45985c2 Added the averaged initial average as well as problem key rejection
- Any keys that exceed the high average are temporarily disabled
- If the sense value goes below the initial average sense, it is re-enabled
- Even works if *many* keys are pressed initially

- Still needs a bit of detection of consistent high keys that sometimes sneak below the threshold
  (May be able to have an elastic threshold that could deal with this)

- Removed dead code (and redundant calculations)
2013-12-01 23:07:38 -05:00
Jacob Alexander
dd1d3ad362 Increasing MAX_PRESS_DELTA_MV to measured min kishsaver value
- Enabling the test point strobe on the kishsaver really kills the sensing (many keys don't work, even at 400)
2013-12-01 17:13:42 -05:00
Jacob Alexander
2d5e6c4e12 Fixing the strobe count on the Kishsaver
- Should fix the last of the phantom keys
2013-12-01 14:52:54 -05:00
Jacob Alexander
6a4de5f356 Fixing more phantom keys on the kishsaver
- Not confirmed that this fixes all known phantom keypresses
2013-11-27 13:33:26 -05:00
Jacob Alexander
d5271befab Adding debounce and reorganized code
- Added debounce mechanism, currently looks for 5 consecutive scans
- Temporarily disabled the test point strobe on the kishsaver (spams debug messages, and not useful anymore; needs to be addressed before strobe detection is implemented though)
- Reorganized code to cleanup the main scan loop function
2013-11-19 03:18:44 -05:00
Jacob Alexander
c58e25d229 Adding initial Unsaver debug strobe map 2013-11-19 02:01:51 -05:00
Jacob Alexander
68f9de9ef5 Initial Terminal F strobe map
- Haven't fully verified all the strobes yet, but should be correct
2013-11-18 03:07:01 -05:00
Jacob Alexander
b32ab98cdf Adding strobe mapper and code cleanup
- Basic strobe mapper added (only kishsaver for now)
- Removed more (less obvious) dead code
- Moved keypress detection closer to detection
- Added more informative keypress debug messages
2013-11-18 02:46:48 -05:00
Jacob Alexander
3d98028679 Removed a keyscan layer and added more debug information
- Added a print macro for colourful convenience
- Removed the usb_keymap variable as it is no longer needed
- Changed usb_dirty to keymap_change (more accurate description)
- Removed the dumpkeys function and now detect key changes much sooner as well as displaying error messages more often
- Added a warming up information message and removed its error status (as it's not an error)
2013-11-17 19:17:54 -05:00
Jacob Alexander
6b38cfbaee Correcting license (should have been lgpl) 2013-11-17 16:42:41 -05:00
Jacob Alexander
a8e35f5cf5 Cleaning up cap sense Alpha code
- Added LGPL headers to appropriate files
- Removed *LOTS* of dead code
- Started standardizing formatting (important stuff done)
2013-11-16 19:37:16 -05:00
Jacob Alexander
afc227d515 Cap sense now functional! Alpha begins :D 2013-11-16 19:37:16 -05:00
Jacob Alexander
a8d8da88e4 Another dfj code merge. 2013-11-16 19:37:16 -05:00
Jacob Alexander
a108dbbbc3 Debugging kishsaver.
- Hardcoded strobe lines (required to make the hardware less noisy)
- Updated debug code
2013-11-16 19:37:16 -05:00
Jacob Alexander
4ce6d34cd8 Adapting the avr-capsense code to the Kiibohd Controller API
- Adding "template" keymap
- Removed "stray" functions, variables
- Cleaned up warnings
- Now builds
- Added buffered macro integration (rather than dealing with USB directly)
- Updated the print messages to use the Kiibohd print header

TODO
- Add generic matrix integration (this will require some changes to the matrix code)
- Add more comments...lots more
- Clean up dead code
2013-11-16 19:37:16 -05:00
Jo Makuch
99712e189e rsync'd over the changes 2013-11-16 19:37:16 -05:00
Jacob Alexander
473e3359f4 MBC-55x support virtually complete.
- I won't do any more, as I can't make the converter fully functional on a modern computer
- Basic typing support is working
- Some of the function modes move around the ASCII values, and this takes a while to decipher and figure out the pattern; it's not hard to do, and I don't really feel like doing it
- The hard part is already done :P
2013-02-01 16:49:32 -05:00
Jacob Alexander
d5c4a0a9fa UART0 on Teensy 3.0 now functional 2013-02-01 15:10:58 -05:00
Jacob Alexander
640c0f0686 Adding the MSBF register enable flag. 2013-02-01 12:17:52 -05:00
Jacob Alexander
4da44b8ff7 Adding initial ARM UART structure for UART0
- Transmit seems to be working
- Receive isn't working yet
- Inversion of the transmit signal doesn't seem to be working
2013-01-30 23:43:41 -05:00
Jacob Alexander
fc7998d605 Adding module compatibility check to CMake build scripts.
- All modules have a default avr compatibilty right now (since that is what they were developed on)
- As modules get tested and added, arm support has to be turned on in the respective setup.cmake file
2013-01-30 18:13:49 -05:00
Jacob Alexander
c8b4baf652 Adding initial Teensy 3 support, compiles, but not fully functional yet.
- CDC Output seems to be working
- USB Keyboard output has not been tested, but is "ready"
- UART and Timers have not been tested, or fully utilized
- Issues using Timer 0
- Initial template for MBC-55X Scan module (only module currently compatible with the arm build)
- Updated the interface to the AVR usb module for symmetry with the ARM usb module
- Much gutting was done to the Teensy 3 usb keyboard module, though not in an ideal state yet
2013-01-27 01:47:52 -05:00
Jacob Alexander
6da1558b78 Updating AVR abstraction to be compatible with ARM, nearly ready for ARM files
- Very small updates to files, mostly modifying to remove name duplications
2013-01-26 22:30:36 -05:00
Jacob Alexander
14158009b2 Preparing for Teensy 3 (ARM) integration, abstracting code hierarchy
- Abstracted USB Module
- Abstracted compiler specific includes for Scan, Macro, Debug, and USB modules
- Updated CMake build files to support changes
- Added abstractions necessary to main.c as well as a compiler specific include file
2013-01-26 15:05:28 -05:00
Jacob Alexander
105d49a65b Adding alternate Enter key to the layout
- Removed another key from the latch list to use as a normal key
2013-01-21 11:53:26 -05:00
Jacob Alexander
f674db7de3 Adding API changes introduced by the FACOM converter
- Shouldn't affect anything, and will allow for greater buffer clearing control
2013-01-20 22:36:05 -05:00
Jacob Alexander
65b4489884 Fixing slow key issues with the FACOM converter
- Required some small API changes, shouldn't affect any other Scan modules (addition of a parameter)
- Still have the latching annoyances for some of the modifiers
- Swapped Esc and Tilde for convenience
- Removed the old Esc key from the latch list (no one needs 13 latches anyways...)
- Added the control cluster mappings (Insert, Delete, Home, End, PgUp, PgDn)
- All other misc keys are currently un-assigned if a keycap legend doesn't map to anything known
  (e.g. blank keys, 000 and 00 are mapped, but your OS probably doesn't know what they mean :P)
2013-01-20 22:23:28 -05:00
Jacob Alexander
db01d733b7 Completed the FACOM 6684 converter...
Unfortunately, the protocol annoying, with only 3 keys having Press/Release signals.
Some of the keys were only meant to be pressed once, and do not have repeat functionality.

The current implementation is a bit slow, so some keys may get lost during USB sending.
This is probably fixable, not sure if I want to spend the time on it though.

There is a keyboard input protocol, but I'm not sure of what information can be transmitted to the keyboard.
The terminal does send some information back and forth between the keyboard, but I'm unclear of the purpose, as I can never get any response out of the keyboard.
2013-01-20 20:27:14 -05:00
Jacob Alexander
ccf1e1c7e5 Adding API update to the MicroSwitch8304 code.
- Should still work, but not tested
2013-01-14 21:51:02 -05:00
Jacob Alexander
6b3ba17f57 Commenting out Tandy1000 code to make compile.
- Code hasn't been compatible with the API for a long time
- It should be possible to use the hardware UART to simplify the code immensely
2013-01-14 21:48:21 -05:00
Jacob Alexander
6104eb3ed6 Commenting out lines, to get the code to compile.
- Not tested, almost guaranteed to not work
- Dual scan code was never completed (I need a project, and motivation :P)
2013-01-14 21:43:26 -05:00
Jacob Alexander
fff3212a10 Updating Kaypro1 code to use newer APIs 2013-01-14 21:40:38 -05:00
Jacob Alexander
94390571c4 Adding initial FACOM template, and buildall.bash regression script. 2013-01-14 21:31:50 -05:00
Jacob Alexander
fd6035e053 Adding more robust detection for the HP150
- All spare cycles are used to get a more accurate data line sample (waaaay more than actually needed, but this helps against noise)
- Switched to a pre/release (add/remove) rather than an add->clear mechanism (or a buffer+debounce/add->clear)
- Note that a pull-down resistor is NEEDED on the data line
2012-11-19 00:55:30 -08:00
Jacob Alexander
59e443552c Completing the HP150 converter. 2012-11-17 02:13:06 -08:00
Jacob Alexander
0c39927268 Adding initial HP150 and IBMConvertible scan modules.
- HP150 is not ready
- IBMConvertible is ready to start testing
2012-11-15 01:28:31 -08:00